1. Product Overview
The InvisiClean Activated Carbon Prefilter is designed to work with the InvisiClean Claro Air Purifier model IC-4524. This prefilter plays a crucial role in the air purification process by capturing larger particles and reducing odors, thereby extending the lifespan of the main HEPA filter.
Key features of this prefilter include:
- Reduces odors from cooking, smoking, pets, and other sources.
- Captures large particulates such as dust, lint, and pet hair.
- Extends the life of the main HEPA filter by protecting it from larger debris.
Image 1.1: Four InvisiClean Activated Carbon Prefilters.
2. Compatibility
This InvisiClean Activated Carbon Prefilter (4-pack) is specifically designed for and compatible with the InvisiClean Claro Air Purifier, Model IC-4524. Ensure your air purifier model matches this specification for proper fit and optimal performance.
Image 2.1: The InvisiClean Claro Air Purifier Model IC-4524, for which these prefilters are designed.
3. Installation Instructions
Follow these steps to properly install or replace the activated carbon prefilter in your InvisiClean Claro Air Purifier IC-4524:
- Power Off and Unplug: Before beginning, ensure the air purifier is turned off and unplugged from the power outlet to prevent electrical hazards.
- Locate Filter Compartment: Refer to your InvisiClean Claro Air Purifier's main instruction manual to locate and open the filter compartment. This is typically on the back or side of the unit.
- Remove Old Prefilter: Carefully remove the existing activated carbon prefilter. It may be attached to the main HEPA filter or sit in a separate slot. Note its orientation.
- Prepare New Prefilter: Unpack the new InvisiClean Activated Carbon Prefilter.
- Install New Prefilter: Place the new prefilter into the designated slot or attach it to the HEPA filter, ensuring it is correctly oriented as the old one was. The carbon prefilter typically sits on the outside, facing the air intake.
- Close Compartment: Securely close the filter compartment cover.
- Restore Power: Plug the air purifier back into the power outlet and turn it on.
- Reset Filter Indicator (if applicable): If your air purifier has a filter replacement indicator, follow the instructions in your air purifier's manual to reset it. This usually involves pressing and holding a "Filter Reset" button for a few seconds.
Image 3.1: Illustration of prefilter installation and layering with the HEPA filter.
4. Maintenance and Replacement
Regular maintenance of your prefilter is essential for maintaining air purifier efficiency and extending the life of your HEPA filter.
4.1. Cleaning the Prefilter
The activated carbon prefilter should be cleaned regularly to remove accumulated dust and debris. This can be done by:
- Gently vacuuming the surface of the prefilter with a brush attachment.
- Wiping the prefilter with a dry cloth.
- Do not wash the activated carbon prefilter with water, as this can damage the carbon material and reduce its effectiveness.
Recommendation: Clean your prefilter monthly, or more frequently if the air quality is poor or if you notice a decrease in air purifier performance.
4.2. Replacing the Prefilter
While the prefilter can be cleaned, it has a limited lifespan for odor reduction and particle capture. It should be replaced periodically to ensure optimal air purification.
- Replacement Frequency: Replace the activated carbon prefilter every 1-3 months, depending on usage and environmental conditions. Heavy use, pets, or smoking in the area may require more frequent replacement.
- Signs of Replacement: Replace the prefilter if you notice a persistent odor, reduced airflow, or if the filter appears heavily soiled and cleaning does not restore performance.
5. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Reduced Airflow | Clogged prefilter | Clean or replace the prefilter. |
| Persistent Odors | Saturated activated carbon | Replace the activated carbon prefilter. |
| Filter Indicator Light Remains On After Replacement | Filter reset not performed | Refer to your air purifier's manual for instructions on how to reset the filter indicator. |
6. Product Specifications
- Brand: InvisiClean
- Model Compatibility: InvisiClean Claro Air Purifier IC-4524
- Item Model Number: IC-4524-Prefilter
- Material Type: Activated Carbon Prefilter
- Item Weight: Approximately 11.2 ounces (for the pack)
- Package Dimensions: Approximately 16.93 x 13.39 x 0.79 inches
- Number of Items: 4 (per pack)
7. Warranty and Support
For specific warranty information regarding your InvisiClean Activated Carbon Prefilter, please refer to the documentation included with your original InvisiClean Claro Air Purifier or visit the official InvisiClean website. For customer support, product inquiries, or assistance with installation and maintenance, please contact InvisiClean customer service through their official channels.
You can visit the InvisiClean Store on Amazon for more products and information.
