Elitech STC-1000Pro Temperature Controller User Manual

Product Overview

The Elitech STC-1000Pro is a versatile plug-and-play temperature controller designed for precise temperature management in various environments such as reef tanks, grow rooms, and incubators. It features both heating and cooling control capabilities, a wide temperature range, and multiple functions for advanced control.

Figure 1: Elitech STC-1000Pro Temperature Controller with its components.

Key Features

• Plug & Play Design: Features a large LCD screen, simple 3-button interface, and pre-wired setup for ease of use.
• Heating & Cooling Control: Capable of connecting to both heating and cooling devices simultaneously, with automatic switching between modes.
• Wide Temperature Control Range: Operates within a range of -40°F to 230°F (-40°C to 110°C).
• Multi-Functional: Includes features such as high/low alarms, start delay, temperature calibration, and selectable Celsius/Fahrenheit units.
• Safe & Reliable: Complies with CE and FCC standards, featuring a fireproof ABS case (UL94 V-0 rated) for enhanced safety.

Figure 2: The STC-1000Pro features a large screen and is suitable for various applications.

Product Specifications

Figure 3: Physical dimensions and cable lengths of the STC-1000Pro.

Setup Guide

1. Unpack the Device: Carefully remove the STC-1000Pro controller, temperature sensor, and power outlets from the packaging.
2. Mounting (Optional): The controller features a hanging tab for convenient mounting. Secure it in a suitable location near your heating/cooling equipment.
   

   Figure 4: The controller features a convenient hanging tab for installation.

3. Connect the Sensor: Plug the temperature sensor into the designated port on the controller. Ensure the sensor is placed in the environment where temperature needs to be monitored and controlled.
4. Connect Power: Plug the controller's power cord into a standard 110V AC power outlet.
5. Connect Appliances:
   • Plug your heating device (e.g., heater, heat lamp) into the "HEATING" outlet.
   • Plug your cooling device (e.g., fan, chiller) into the "COOLING" outlet.
   

   Figure 5: Connect heating and cooling devices to their respective outlets.

6. Initial Power On: The LCD screen will illuminate, displaying the current temperature (PV) and set value (SV).
7. App Connection (Optional for Wi-Fi models): If you have a Wi-Fi enabled model, you can connect it to the Elitech iCold app for remote monitoring and control.
   Play video

   Video 1: Instructions on how to add and connect the Elitech controller to the iCold app.

Operation

Setting Temperature Parameters

The STC-1000Pro allows you to set desired temperature values and control various operational parameters.

1. Enter Setting Mode: Press and hold the SET button for 3 seconds until the display changes to show parameter codes.
   

   Figure 6: Hold SET button to enter setting mode.

2. Navigate Parameters: Use the Up (▲) and Down (▼) buttons to scroll through different parameter codes (e.g., TS for temperature setpoint, CD for cooling differential).
3. Adjust Parameter Value: Once the desired parameter code is displayed, press the SET button to view its current value. Use the Up (▲) and Down (▼) buttons to adjust the value.
4. Save and Exit: Press the SET button again to save the new value and move to the next parameter. To exit the setting mode, press and hold the SET button for 3 seconds.

Specific Settings

• Temperature Calibration: If the displayed temperature is inaccurate, you can calibrate it. Refer to the full user manual for detailed steps on temperature calibration.
• Keeping Display On (BL=0): To ensure the display remains on continuously, adjust the 'BL' parameter to 0.
  Play video

  Video 2: How to set the display to remain on by adjusting the BL parameter.

• Humidity Calibration (for models with humidity sensor): If your STC-1000Pro model includes a humidity sensor, you can calibrate it for accuracy.
  Play video

  Video 3: Guide to setting humidity calibration.

Maintenance

• Cleaning: Regularly wipe the controller and sensor with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
• Sensor Care: Ensure the temperature sensor is kept clean and free from debris to maintain accuracy. Avoid bending or damaging the sensor cable.
• Storage: If storing the device for an extended period, disconnect it from power, clean it, and store it in a cool, dry place away from direct sunlight.

Troubleshooting

If you encounter issues with your Elitech STC-1000Pro, please refer to the following common troubleshooting tips:

• Display Not On:
  • Check if the controller is properly plugged into a live power outlet.
  • Ensure the power outlet is functioning correctly.
  • Verify the 'BL' parameter setting (if applicable) to ensure the display is not set to turn off.
• Temperature Reading Inaccurate:
  • Check if the sensor is securely connected to the controller.
  • Ensure the sensor is placed correctly in the environment being monitored.
  • Perform a temperature calibration as described in the Operation section or the full user manual.
• Heating/Cooling Device Not Activating:
  • Verify that the heating/cooling device is properly plugged into the correct outlet on the controller.
  • Check if the heating/cooling device itself is functional.
  • Review your temperature setpoints (SV) and differentials (e.g., CD, HD) to ensure they are configured correctly for your desired operation.
• Alarms Triggering Unexpectedly:
  • Check the high and low alarm settings (e.g., AH, AL parameters) to ensure they are set appropriately for your application.
  • Verify the temperature sensor's accuracy.

For more detailed troubleshooting or specific error codes, please consult the comprehensive user manual provided with your product or contact Elitech customer support.

Warranty and Support

Elitech provides comprehensive customer support for its products.

• Warranty: Please refer to the warranty information included with your product packaging for details on coverage and terms.
• Technical Support: 24/7 US Technician Support is available via Email and Phone.
• Contact Information:
  • Email: support@elitechus.com
  • Phone: (+1) 408-844-4070
  • Address: 2528 Qume Drive #2, San Jose, CA 95131, United States