Introduction
The Rocketfish Wireless Rear Speaker Kit provides a convenient solution for integrating rear surround sound speakers into your home theater system without the need for long, unsightly speaker wires. This kit transmits high-quality audio wirelessly, offering a clean and efficient setup for an immersive audio experience. It includes a wireless sender unit and a wireless receiver unit, designed for easy installation and reliable performance.
What's in the Box
Please verify that all components are present before beginning installation:
- Wireless sender
- Wireless receiver
- 5V DC power adapter (for wireless sender)
- 18V DC power adapter (for wireless receiver)
- 2 x 2-foot speaker wires
- Quick Setup Guide
Setup
Follow these steps to set up your Rocketfish Wireless Rear Speaker Kit:
1. Placement
Position the wireless sender near your home theater receiver and the wireless receiver near your rear speakers. Ensure both units are within range of a power outlet.
Image: The Rocketfish Wireless Rear Speaker Kit, showing both the sender and receiver units. The sender is the smaller unit, and the receiver is the larger unit, both black with a blue indicator light.
2. Connecting the Sender Unit
- Connect the 5V DC power adapter to the wireless sender unit and plug it into a power outlet.
- Connect the speaker wires from your home theater receiver's rear speaker outputs to the corresponding inputs on the wireless sender unit. Ensure correct polarity (+ to + and - to -).
Image: A close-up of the Rocketfish 2.4GHz wireless sender and receiver kit, highlighting its ability to transmit high-quality audio wirelessly.
3. Connecting the Receiver Unit
- Connect the 18V DC power adapter to the wireless receiver unit and plug it into a power outlet.
- Connect your rear speakers to the corresponding outputs on the wireless receiver unit using the provided speaker wires. Observe correct polarity.
- The receiver unit features a volume knob for adjusting the output level to your rear speakers.
Image: A rear view of the Rocketfish wireless receiver unit, showing the speaker output terminals, DC power input, and power switch. The unit is compact and designed for discreet placement.
4. Pairing (Automatic)
The sender and receiver units are designed to automatically pair with each other upon power-up. Once both units are powered on, the blue indicator lights should become solid, indicating a successful connection.
Image: The product packaging for the Rocketfish Wireless Rear Speaker Kit, emphasizing its core benefit of providing surround sound without cable clutter.
Operating Instructions
Once the setup is complete and the sender and receiver units are paired, your wireless rear speaker system is ready for use. Play audio through your home theater receiver as you normally would. The audio signal for the rear channels will be transmitted wirelessly to the receiver unit, which then powers your rear speakers.
- Volume Adjustment: Use the volume knob on the wireless receiver unit to adjust the loudness of your rear speakers relative to your main speakers.
- Power On/Off: Use the power switch on the receiver unit to turn it on or off. The sender unit typically powers on with your home theater receiver.
Image: The Rocketfish Wireless Rear Speaker Kit, highlighting its premium sound quality and wireless connectivity features.
Maintenance
To ensure the longevity and optimal performance of your Rocketfish Wireless Rear Speaker Kit, follow these simple maintenance guidelines:
- Cleaning: Wipe the units with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
- Ventilation: Ensure adequate airflow around both the sender and receiver units to prevent overheating. Do not block ventilation openings.
- Storage: If storing the kit for an extended period, disconnect it from power and store it in a cool, dry place.
Image: A close-up of the Rocketfish Wireless Rear Speaker Kit, emphasizing its premium durability and quality materials, crafted for lasting use.
Troubleshooting
If you encounter issues with your Rocketfish Wireless Rear Speaker Kit, refer to the table below for common problems and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from rear speakers. |
|
|
| Humming or static noise. |
|
|
| Audio dropouts or intermittent sound. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | RF-WRSK18 |
| Speaker Type | Rear Speaker Kit |
| Wireless Communication Technology | Radio Frequency (2.4GHz) |
| Surround Sound Channel Configuration | 2.0 |
| Speaker Maximum Output Power | 5 Watts |
| Item Weight | 1.98 pounds (0.9 Kilograms) |
| Power Source | Corded Electric |
| Included Components | Wireless sender, Wireless receiver, 5V DC power adapter (wireless sender), 18V DC power adapter (wireless receiver), 2 x 2-foot speaker wires, Quick Setup Guide |
| Color | Black |
| Indoor/Outdoor Usage | Indoor |
| UPC | 600603235023 |
Warranty Information
This Rocketfish product comes with a Limited Warranty. For detailed information regarding the terms, conditions, and duration of your warranty, please refer to the Quick Setup Guide included with your product or visit the official Rocketfish website. Retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or to inquire about replacement parts, please visit the official Rocketfish support page or contact their customer service. You can find more information and resources on the Rocketfish Brand Store on Amazon.
