Trailblaze Ninja Warrior Obstacle Course - Model TB015

1. Introduction

This manual provides essential information for the safe and effective setup, operation, and maintenance of your Trailblaze Ninja Warrior Obstacle Course. This kit is designed to provide a challenging and engaging outdoor activity for children, promoting physical fitness, balance, and coordination. Please read all instructions carefully before assembly and use.

A complete Trailblaze Ninja Warrior Obstacle Course kit, including slacklines, monkey bars, rings, and a carry bag, ready for outdoor setup.

2. Safety Information

WARNING: NOT SUITABLE FOR CHILDREN UNDER 13 YEARS OF AGE. PARENT SUPERVISION RECOMMENDED AT ALL TIMES.

• Age Recommendation: This product is intended for children aged 6 years and older.
• Weight Limit: The sturdy rings and slackline system can support a maximum weight of 330 pounds (150 kg). Do not exceed this weight limit.
• Adult Supervision: Always ensure constant adult supervision when children are using the obstacle course.
• Installation: Ensure the course is installed correctly and securely according to the instructions. Verify all connections and anchors before each use.
• Clearance Area: Maintain a clear safety zone around and beneath the entire obstacle course. Remove any sharp objects, rocks, or other hazards from the play area.
• Tree Selection: Use only healthy, mature trees with a minimum trunk diameter of 12 inches (30 cm) for installation. Ensure trees are strong enough to support the weight and dynamic forces of users. Avoid small or weak trees that may cause excessive sagging.
• Weather Conditions: Do not use the course during wet, icy, or windy conditions.
• Inspection: Regularly inspect all components for wear, damage, or loose connections. Replace any damaged parts immediately.
• Proper Use: Instruct children on the proper use of each obstacle. Discourage dangerous activities such as jumping from heights, swinging excessively, or using obstacles in unintended ways.

3. What's Included

Your Trailblaze Ninja Warrior Obstacle Course kit includes the following components:

• 2 x 55ft Slacklines with high-grade ratchets
• 2 x Monkey Bars
• 2 x Gym Rings
• 1 x Monkey Fist
• 1 x Seat Swing
• 1 x Plastic Ninja Wheel
• 1 x Rope Ladder
• 1 x Climbing Cargo Net (12"x12")
• 2 x Tree Protectors
• 1 x Premium Carry Bag
• 17 x Buckle Straps
• 17 x Carabiners

Detailed view of all 10 obstacles and hardware included in the Trailblaze Ninja Warrior Obstacle Course kit.

4. Setup Instructions

The Trailblaze Ninja Warrior Obstacle Course is designed for quick and easy setup, typically requiring no special tools. Follow these steps for installation:

1. Select Location: Choose two healthy, mature trees that are 15 to 45 feet apart and have a minimum trunk diameter of 12 inches (30 cm). Ensure the ground beneath is soft and clear of obstacles.
2. Wrap Tree Protectors: Place the tree protectors around the trunks of both trees at the desired height for the slackline. This protects both the trees and the slackline webbing.
3. Attach Slackline: Securely wrap one end of the 55ft slackline around the first tree, feeding it through the loop or buckle. Repeat with the second slackline on the same tree, ensuring they are parallel.
4. Connect Ratchet: On the second tree, attach the ratchet mechanism to the slackline. Feed the loose end of the slackline through the ratchet.
5. Tension the Slackline: Use the ratchet to gradually tighten the slackline until it is taut. Ensure the line is level and secure. Avoid over-tightening, which can damage the line or trees.
6. Attach Obstacles: Use the provided buckle straps and carabiners to attach the various obstacles (monkey bars, gym rings, etc.) to the slackline. You can customize the order and spacing of obstacles to create different challenge levels.

Visual instructions for setting up the course: 1. Wrap tree protector around a tree. 2. Feed the slackline through the ratchet and tighten. 3. Clip obstacles onto the slackline using carabiners.

Setup Video

An official video demonstrating the setup process and various features of the Trailblaze Ninja Warrior Obstacle Course, showcasing its ease of installation and different obstacles.

5. Operating Instructions

Once the course is securely set up, children can begin to engage with the various obstacles. The course is designed to be adaptable to different skill levels and ages.

• Customization: The order and spacing of the obstacles can be easily changed to increase or decrease the difficulty, providing a continuous challenge as children develop their skills.
• Skill Development: Encourage children to use the obstacles to improve their strength, balance, grip, control, and focus.
• Varied Play: The course supports a range of activities, from climbing the rope ladder and cargo net to swinging on the monkey bars, gym rings, and seat swing.

Two children demonstrating the use of the obstacle course, one on a rope ladder (ages 5-7) and another on a ninja wheel (ages 8-12), illustrating adaptability for various age groups.

Action Video

An official video showing children actively engaging with the Trailblaze Ninja Warrior Obstacle Course, highlighting the dynamic play and physical benefits.

6. Maintenance

Regular maintenance ensures the longevity and safety of your Trailblaze Ninja Warrior Obstacle Course.

• Routine Inspection: Before each use, visually inspect the entire course. Check the slacklines for fraying or cuts, ratchets for proper function, and all obstacle attachments (buckle straps, carabiners) for security and wear.
• Cleanliness: The course materials (metal, nylon, wood, PVC) are designed to be weatherproof and UV-stable. Clean components with mild soap and water as needed. Avoid harsh chemicals.
• Storage: While the course is built to withstand various weather conditions, for extended periods of non-use or during extreme weather, consider disassembling and storing components in the provided premium carry bag in a dry place.
• Hardware: Ensure all carabiners and buckles are free from rust or corrosion. The wooden grips are splinter-free, but inspect them periodically for any damage.

The obstacle course installed between two trees in a backyard, shown during rainfall, highlighting its weatherproof design for year-round use.

7. Troubleshooting

If you encounter issues with your obstacle course, consider the following:

• Slackline Sagging: If the slackline sags excessively, re-tension it using the ratchet. Ensure the trees selected are strong enough and the distance between them is within the recommended range (15-45 ft).
• Loose Obstacles: Check that all buckle straps are tightly secured and carabiners are fully closed and locked.
• Difficulty with Ratchet: Ensure the slackline is threaded correctly through the ratchet. If the ratchet is stiff, ensure it is clean and free of debris.
• Missing Parts: Refer to the "What's Included" section. If any parts are missing upon arrival, contact customer support.

8. Specifications

9. Warranty and Support

Manufacturer Warranty: This product comes with a manufacturer warranty from 1 year of purchase. Please retain your proof of purchase for warranty claims.

For further assistance, product information, or to inquire about replacement parts, please visit the official Trailblaze Store: Trailblaze Store