Introduction
This manual provides detailed instructions for the safe and efficient operation of your TEAC CD-P650-B Compact Disc Player. Please read this manual thoroughly before using the unit and retain it for future reference. This device supports CD, CD-R/RW, and MP3 disc playback, features a USB port for iPod digital interface and USB memory recording/playback, and includes a digital audio connection for iPod via USB cable.
Safety Information
Important Safety Instructions:
- Do not expose this appliance to dripping or splashing.
- Do not place objects filled with liquids, such as vases, on the apparatus.
- Ensure proper ventilation. Do not block any ventilation openings.
- Use only attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel.
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Verify that your package contains the following items:
- TEAC CD-P650-B Compact Disc Player
- Remote Control
- MP3 Player/USB Flash Memory Compatibility (referring to the unit's capability)
- Power Cable
- User Manual (this document)
Product Overview
Front Panel
Image Description: A full front view of the black TEAC CD-P650-B Compact Disc Player. It features a central disc tray, a display screen below it, and various control buttons on both sides. The TEAC logo is on the left, and an MP3 logo is on the right.
Image Description: A close-up of the left side of the player's front panel. It shows the 'STANDBY/ON' button, a headphone jack labeled 'PHONES' with a 'LEVEL' control knob, and a 'iPod/USB' port.
Image Description: A close-up of the right side of the player's front panel, displaying the main playback control buttons: Eject, Stop, Play/Pause, and Skip/Search (forward and backward).
Rear Panel
Image Description: A full rear view of the black TEAC CD-P650-B Compact Disc Player. It shows various input/output ports including 'LINE OUT' (RCA), 'REMOTE CONTROL' (RCA A/B with selector), and 'DIGITAL OUT' (Optical).
Image Description: A close-up of the rear panel connections, highlighting the 'LINE OUT' RCA jacks (L and R), 'REMOTE CONTROL' jacks (A and B) with a 'SELECTOR SINGLE SYSTEM' switch, and the 'DIGITAL OUT' optical port.
Setup
Connecting to an Amplifier/Receiver
- Ensure both the CD player and your amplifier/receiver are powered off.
- Connect the RCA audio cables (not included) from the LINE OUT jacks (L and R) on the rear of the CD-P650-B to the corresponding audio input jacks on your amplifier/receiver (e.g., CD IN, AUX IN).
- For digital audio, connect an optical cable (not included) from the DIGITAL OUT (OPTICAL) port on the CD-P650-B to a digital optical input on your amplifier/receiver.
Power Connection
Connect the power cable to the AC inlet on the rear of the unit and then to a standard wall outlet.
Remote Control Battery Installation
The remote control requires two AA batteries. Open the battery compartment on the back of the remote control, insert the batteries according to the polarity markings, and close the compartment.
Operating Instructions
Basic CD Playback
- Press the STANDBY/ON button to power on the unit.
- Press the Eject button (
) to open the disc tray. - Place a CD (CD, CD-R/RW, or MP3 disc) with the label side up into the disc tray.
- Press the Eject button again to close the disc tray. The unit will read the disc.
- Press the Play/Pause button () to begin playback.
- Use the Skip/Search buttons ( / ) to navigate between tracks.
- Press the Stop button () to stop playback.
The unit supports Repeat (One, All, A-B), Shuffle, and 32-track Program Play functions, accessible via the remote control.
USB Playback
- Connect a USB memory device containing MP3 files to the iPod/USB port on the front panel.
- Press the CD/USB button to switch to USB mode.
- Use the playback controls (Play, Stop, Skip) to manage your MP3 files.
iPod/iPhone Digital Interface
Image Description: A diagram illustrating various iPod models and their compatibility with the CD-P650 via USB connection, indicating which models support charging during playback.
- Connect your iPod or iPhone to the iPod/USB port on the front panel using a compatible USB cable (not included).
- The CD-P650-B will establish a digital audio connection, allowing playback of audio files from your device.
- Your iPod/iPhone will charge while connected and playing back audio.
MP3 Recording to USB Memory Device
Image Description: A multi-step diagram showing how to record audio to a USB device. It depicts connecting a USB, selecting CD/USB mode, opening the disc tray, inserting a CD, and pressing the record button.
- Connect a USB memory device to the iPod/USB port.
- Insert an audio CD into the disc tray.
- Press the CD/USB button to ensure the unit is in CD mode.
- Select the track(s) you wish to record. You can choose to record a single track or the entire disc.
- Press the RECORD button. The recording will begin.
- To stop recording, press the STOP button.
Note: MP3 recording from AUX input to USB memory device is also supported.
Headphone Output
Connect headphones to the PHONES jack on the front panel. Adjust the listening volume using the LEVEL control knob next to the headphone jack.
Maintenance
Cleaning the Unit
- Wipe the exterior of the unit with a soft, dry cloth.
- Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- Ensure the unit is unplugged before cleaning.
Disc Handling
- Always hold discs by their edges.
- Keep discs clean and free from scratches. Use a soft, lint-free cloth to wipe discs from the center outwards if necessary.
- Store discs in their cases when not in use.
Troubleshooting
If you experience issues with your CD-P650-B, please refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Unit does not power on. | Check if the power cable is securely connected to the unit and the wall outlet. Ensure the wall outlet is functional. |
| "NO DISC" message appears. | Ensure a disc is properly inserted with the label side up. The disc may be dirty or scratched; try a different disc or clean the current one. |
| No sound output. | Verify audio cables are correctly connected to your amplifier/receiver. Check the input selection on your amplifier/receiver. Ensure the volume on both the CD player (headphone level) and amplifier is not muted or set too low. |
| Remote control not working. | Check if the batteries are correctly inserted and not depleted. Ensure there are no obstructions between the remote and the unit's remote sensor. |
| USB device not recognized. | Ensure the USB device is formatted correctly (FAT16/FAT32) and contains compatible MP3 files. Try a different USB device. |
| Recording to USB fails. | Ensure the USB device has sufficient free space. Check if the USB device is write-protected. |
Specifications
Image Description: A detailed diagram outlining the main features and general specifications of the TEAC CD-P650, including CD player section, USB section, and general unit specifications.
| Feature | Detail |
|---|---|
| Model Name | CD-P650-B |
| Product Dimensions (W x H x D) | 17.1 x 3.4 x 11.2 inches (435 x 85 x 285 mm) |
| Item Weight | 11 pounds (4.0kg) |
| CD Player Section - Frequency Response | 20-20kHz (±2dB) |
| CD Player Section - THD | less than 0.005% (1kHz) |
| CD Player Section - S/N Ratio | more than 100dB |
| CD Player Section - Analogue Output | 2.0Vrms (RCA) |
| USB Section - Playback Frequency Response | 20-20kHz |
| USB Section - Recording Frequency Response | 20-15kHz |
| USB Section - S/N Ratio | more than 85dB (Playback/Recording) |
| USB Power Supply | 5V DC, 0.5A |
| Digital-to-Analog Converter | Burr Brown 1791ADBR, 24-bit/192kHz Sampling |
| Connectivity Technology | Interface, Aux, USB |
| Headphone Jack | 1/4" (with Level Control) |
| Power Operation | 120V AC, 60Hz (US); 230V AC, 50Hz (EUR) |
| Batteries for Remote | 2 AA batteries required |
Warranty and Support
Warranty Information
This product is a Certified Refurbished unit. It has been tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories and a minimum 90-day warranty.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the retailer or the manufacturer's customer support. Keep your purchase receipt and product serial number readily available when contacting support.
