D-Link DGS-3130-54TS 48-Port Gigabit Ethernet Switch Instruction Manual

1. Product Overview

The D-Link DGS-3130-54TS is a Lite Layer 3 stackable managed Gigabit Ethernet switch designed for versatile network deployments. It features 48 Gigabit Ethernet ports, 2 10GBase-T ports, and 4 10G SFP+ ports for high-speed uplinks. This switch incorporates advanced Layer 2 and Layer 3 features to enhance network efficiency and includes robust redundancy features for reliable operation.

Figure 1: Front view of the D-Link DGS-3130-54TS switch, showing 48 Gigabit Ethernet ports, 2 10GBase-T ports, and 4 10G SFP+ ports, along with status indicators and a console port.

2. Setup and Installation

2.1 Unpacking and Package Contents

Verify the contents of your DGS-3130-54TS package. The box should contain the following items:

• DGS-3130-54TS Device
• Power Cord
• Console Cable
• Rack Mounting Kit
• Quick Installation Guide (QIG)

If any items are missing or damaged, please contact your local D-Link reseller for assistance.

2.2 Physical Installation

The DGS-3130-54TS switch can be installed in a standard 19-inch equipment rack or placed on a desktop. Ensure the installation location provides adequate ventilation and is free from excessive heat, humidity, or electromagnetic interference.

Rack Mounting

1. Attach the provided mounting brackets to the sides of the switch using the screws included in the rack mounting kit.
2. Secure the switch into the rack using appropriate rack screws.

Power Connection

Connect the supplied power cord to the power inlet on the rear panel of the switch and then to a suitable AC power outlet. The switch supports dual power inputs for redundancy.

2.3 Initial Network Connection

To access the switch's management interface for initial configuration, connect a computer to the switch using the console cable or an Ethernet cable to one of the Gigabit Ethernet ports.

• Console Port: Use the provided console cable to connect a terminal emulator on your computer to the switch's console port. Refer to the Quick Installation Guide for default console settings.
• Ethernet Port: Connect an Ethernet cable from your computer to any of the 10/100/1000BASE-T ports. The switch will typically obtain an IP address via DHCP or use a default static IP address for initial access.

3. Operation

3.1 Basic Connectivity

The DGS-3130-54TS provides 48 10/100/1000BASE-T ports for connecting network devices such as computers, servers, and other switches. The 2 10GBASE-T ports and 4 10G SFP+ ports are designed for high-bandwidth uplinks to core network devices or other switches, facilitating high-speed data transfer across your network.

3.2 Advanced Features

This switch supports a range of advanced Layer 2 and Layer 3 features to optimize network performance and management:

• Layer 2 Features: Includes VLANs, Link Aggregation, Quality of Service (QoS), and Spanning Tree Protocol (802.1D/W/S) to prevent network loops.
• Layer 3 Features: Supports RIP/RIPng and OSPFv2/v3 for dynamic routing, allowing the switch to intelligently forward data packets across different subnets and determine the fastest routes.
• Physical Stacking: Up to 9 units can be physically stacked, providing 80 Gbps per device stacking bandwidth, which allows for flexible capacity expansion.
• Smart Fan: The integrated smart fan system automatically adjusts its speed to maintain optimal operating temperatures, ensuring efficient cooling and reduced noise.

4. Maintenance

4.1 General Care

To ensure the longevity and optimal performance of your DGS-3130-54TS switch, keep it in a clean, dust-free environment with adequate airflow. Avoid blocking ventilation openings. Regularly inspect power cords and network cables for damage.

4.2 Firmware Updates

Periodically check the D-Link support website for the latest firmware updates. Firmware updates can provide new features, performance enhancements, and security patches. Follow the instructions provided with the firmware update package carefully.

4.3 Redundancy Features

The DGS-3130-54TS is equipped with several redundancy features to enhance reliability:

• Dual Power Inputs: Provides power redundancy, ensuring continuous operation even if one power source fails.
• Ethernet Ring Protection Switching (ERPS): Offers sub-50ms recovery time in ring topologies, minimizing network downtime.
• 6 kV Surge Protection: Built-in protection on all Gigabit Ethernet access ports safeguards the switch and connected devices from electrical surges caused by lightning or unstable power.

5. Troubleshooting

This section provides solutions to common issues you might encounter with your DGS-3130-54TS switch.

5.1 No Power Indicator Light

• Ensure the power cord is securely connected to both the switch and a working power outlet.
• Verify that the power outlet is supplying power by testing it with another device.
• Check the power cord for any visible damage.

5.2 No Network Connectivity

• Check the Ethernet cables connected to the switch and the end devices. Ensure they are properly seated and undamaged.
• Verify the link/activity LEDs on the switch ports. If they are off, there might be a cable issue or the connected device is not powered on.
• Confirm that the switch's IP address is correctly configured and that your computer is on the same subnet or has proper routing configured.
• If using advanced features like VLANs, ensure the port configurations are correct for the connected devices.

5.3 Slow Network Performance

• Check for network loops using Spanning Tree Protocol status.
• Monitor port utilization to identify congested links.
• Ensure duplex settings match between the switch and connected devices.
• Verify that the latest firmware is installed on the switch.

For more detailed troubleshooting or persistent issues, refer to the comprehensive user manual available on the D-Link support website or contact D-Link technical support.

6. Technical Specifications

Figure 2: D-Link DGS-3130-54TS switch with its physical dimensions: 17.32 inches length, 13.88 inches width, and 1.73 inches height.

7. Warranty and Support

D-Link products are designed for reliability and performance. The DGS-3130-54TS switch comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official D-Link website.

For technical support, product documentation, firmware updates, and frequently asked questions, please visit the D-Link support portal:

D-Link Support Website: us.dlink.com/support

D-Link offers expert support and aims to provide reliable solutions for your networking infrastructure.