Introduction
The LUME CUBE Suction Cup Mount is designed to provide a versatile and secure attachment solution for your Lume Cube light. This mount allows you to easily position your Lume Cube on any flat, non-porous surface, such as tables, glass, or even the back of a smartphone, enhancing your lighting options for various recording scenarios.
What's in the Box
- Suction Cup Mount (Model LC-SCUP11)
Note: Lume Cube lights are sold separately.
Setup and Assembly
- Attach Lume Cube to Mount: The Suction Cup Mount features a 1/4"-20 mounting screw. Align the screw with the mounting hole on your Lume Cube light and rotate the Lume Cube clockwise until it is securely fastened.
Image: A Lume Cube light is shown attached to the top of the suction cup mount, ready for use.
- Positioning the Mount: The mount includes a tilting ball head and offers 360° rotation, allowing for flexible adjustment of your Lume Cube's angle and direction. Loosen the adjustment knob, position the light as desired, and then tighten the knob to secure.
Operating the Suction Cup
- Prepare the Surface: Ensure the surface where you intend to attach the suction cup is clean, dry, and smooth. Dust or debris can reduce suction effectiveness.
- Attach the Suction Cup: Press the suction cup firmly against the desired flat surface.
Image: A hand holds the suction cup mount, illustrating its size and how it can be positioned on a device like a smartphone.
- Engage the Suction Lock: Flip the small latch on the side of the suction cup down. This action creates a vacuum, securely locking the mount to the surface.
Image: The suction cup mount is shown firmly attached to the back of an iPhone, with the latch engaged for secure placement.
Image: A Lume Cube light is positioned on top of an iPhone, held by the suction cup mount, demonstrating a common use case.
- Release the Suction: To remove the mount, simply flip the latch back up. This releases the vacuum, allowing you to easily detach the suction cup from the surface.
Maintenance
If the suction cup loses its stickiness due to dust or debris, simply wash it with water and allow it to air dry. This will restore its adhesive properties.
Specifications
| Feature | Detail |
|---|---|
| Brand | LUME CUBE |
| Model Number | LC-SCUP11 |
| Color | Black |
| Compatible Devices | Lume Cube |
| Mounting Type | Wall Mount (Suction) |
| Special Feature | Rotatable |
| Water Resistance Level | Not Water Resistant |
| Item Dimensions (LxWxH) | 2.36 x 2.36 x 1.97 inches |
| Item Weight | 60 Grams |
| Material | Glass (referring to the suction cup material, though the body is likely plastic/rubber) |
| UPC | 855239006732 |
Troubleshooting
- Suction cup not holding: Ensure the surface is clean, dry, and smooth. Wash the suction cup with water if it appears dirty or has lost its stickiness.
- Light not staying in position: Tighten the adjustment knob on the ball head to secure the Lume Cube at the desired angle.
Warranty and Support
For warranty information or technical support, please refer to the official LUME CUBE website or contact their customer service directly. Keep your purchase receipt for warranty claims.