TFA 30.3210.10

TFA Dostmann 30.3210.10 Wireless Temperature Transmitter Instruction Manual

Model: 30.3210.10

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your TFA Dostmann 30.3210.10 Temperature Transmitter. This device is designed as a replacement or additional sensor for compatible TFA radio weather stations, including models 30.3047, 30.3048, 60.4510, and 60.4518. It wirelessly transmits outdoor temperature data and can also be used to monitor temperatures in remote indoor areas such as basements, garages, or children's rooms.

Product Overview

The TFA Dostmann 30.3210.10 is a reliable wireless temperature transmitter featuring an integrated display for direct temperature readings. It offers a transmission range of up to 100 meters in open fields, ensuring flexible placement options. Its compact and durable plastic design allows for both hanging and standing installation.

TFA Dostmann 30.3210.10 Temperature Transmitter

Image: TFA Dostmann 30.3210.10 Temperature Transmitter with LCD display.

Package Contents

The package includes:

  • 1 x TFA Dostmann 30.3210.10 Temperature Transmitter

Note: 2 x 1.5V AAA batteries are required and not included in the package. Please purchase them separately.

Setup

  1. Battery Installation:

    Open the battery compartment cover on the back of the transmitter. Insert two 1.5V AAA batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.

  2. Pairing with Main Station:

    Once batteries are installed, the transmitter will automatically begin sending temperature data. Refer to your main TFA radio weather station's instruction manual for specific pairing procedures. Typically, the main station will automatically detect and connect to the transmitter within a few minutes. Ensure both devices are within range.

  3. Placement:

    For accurate outdoor temperature readings, mount or place the transmitter in a location protected from direct precipitation and direct sunlight. An ideal location is under an eave or on a shaded wall. For indoor monitoring, place it in the desired remote room. The maximum range is 100 meters in open areas; obstacles like walls and electronic interference can reduce this range.

    Temperature transmitter mounted on a wall indoors

    Image: The temperature transmitter mounted on an interior wall, displaying a temperature of 24.2 degrees Celsius.

Operating Instructions

  • Temperature Display: The integrated LCD screen on the transmitter will continuously display the current temperature.
  • Wireless Transmission: The transmitter automatically sends temperature data to your compatible TFA radio weather station at regular intervals. No manual intervention is required for transmission.

Maintenance

  • Battery Replacement: When the display on the transmitter becomes dim or the main station loses connection, it is time to replace the batteries. Use two fresh 1.5V AAA batteries.
  • Cleaning: Clean the transmitter with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Environmental Protection: Ensure the transmitter remains protected from extreme weather conditions, especially direct rain and prolonged exposure to intense sunlight, to prolong its lifespan and ensure accurate readings.

Troubleshooting

Problem Possible Cause Solution
No temperature display on transmitter or main station.
  • Batteries are dead or incorrectly inserted.
  • Transmitter is out of range of the main station.
  • Interference from other electronic devices.
  • Replace batteries with new 1.5V AAA batteries, checking polarity.
  • Move the transmitter closer to the main station.
  • Relocate the transmitter or main station away from potential sources of interference (e.g., TVs, computers, microwaves).
Inaccurate temperature readings.
  • Transmitter exposed to direct sunlight or precipitation.
  • Ventilation holes are blocked.
  • Relocate the transmitter to a shaded, protected area.
  • Ensure ventilation holes are clear of debris.
Intermittent signal loss.
  • Weak batteries.
  • Obstacles between transmitter and main station (e.g., thick walls, metal objects).
  • Replace batteries.
  • Adjust the position of the transmitter or main station to minimize obstructions.

Specifications

  • Model: 30.3210.10
  • Material: Plastic
  • Dimensions (L x W x H): 6.3 x 2.4 x 10.2 cm (2.48 x 0.94 x 4.02 inches)
  • Weight: 64 grams (2.26 ounces)
  • Temperature Measurement Range: -20°C to +50°C (-4°F to +122°F)
  • Temperature Reading Accuracy: ±1°C
  • Connectivity Technology: 433 MHz Radio
  • Maximum Range: 100 meters (328 feet) in open field
  • Power Source: 2 x 1.5V AAA batteries (not included)
  • Display Type: LCD
  • Mounting Options: Hanging or Standing
  • Compatibility: TFA Radio Stations 30.3047, 30.3048, 60.4510, 60.4518
  • Country of Origin: China

Warranty and Support

For warranty information and technical support, please contact TFA Dostmann directly or refer to the documentation provided with your main TFA radio weather station. Keep your purchase receipt as proof of purchase.

Manufacturer: TFA Dostmann

For further assistance, visit the official TFA website or contact their customer service department.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.