1. Introduction
This manual provides essential information for the safe and efficient use of your OSRAM LED Superstar Classic A60 Dimmable LED lamp. This LED lamp is designed to replace conventional 60W incandescent bulbs, offering significant energy savings and a long operational life. It features a classic pear shape, an E27 base, and emits a warm white light at 2700K with 806 lumens of brightness. The lamp is dimmable, allowing for adjustable light levels to suit various environments.
Image 1: OSRAM LED Superstar Classic A60 Dimmable LED lamp and its retail packaging.
2. Important Safety Instructions
Please read and understand all safety instructions before installing or using the lamp. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Power Off: Always ensure the power supply to the luminaire is switched off before installation, removal, or maintenance.
- Correct Base: Use only in luminaires designed for E27 base bulbs.
- Dimmable Compatibility: This lamp is dimmable. Ensure that the dimmer switch used is compatible with LED lamps to prevent flickering or damage. Refer to the dimmer manufacturer's instructions for compatibility.
- Indoor/Outdoor Use: Suitable for indoor use. For outdoor applications, the lamp must be installed in appropriate outdoor luminaires that provide adequate protection against moisture and environmental elements.
- Do Not Disassemble: Do not attempt to disassemble, modify, or repair the lamp. There are no user-serviceable parts inside.
- Avoid Direct Contact: Do not touch the lamp with wet hands or when standing on a wet surface.
- Disposal: Dispose of the lamp according to local regulations for electronic waste.
3. Setup and Installation
Follow these steps to install your OSRAM LED lamp:
- Turn Off Power: Locate the light switch or circuit breaker that controls the power to the fixture where the lamp will be installed. Turn off the power completely.
- Remove Old Bulb: Carefully unscrew the existing bulb from the E27 base socket. Allow it to cool if it was recently in use.
- Install New LED Lamp: Gently screw the OSRAM LED Superstar Classic A60 lamp into the E27 base socket. Ensure it is securely tightened but do not overtighten.
- Restore Power: Turn the power back on at the light switch or circuit breaker.
- Test: Turn on the light switch to confirm the lamp is functioning correctly.
Image 2: Close-up view of the OSRAM LED lamp, showing its E27 screw base.
4. Operating Instructions
The OSRAM LED Superstar Classic A60 lamp operates like a standard light bulb with the added benefit of dimming capability.
- Turning On/Off: Use your existing light switch to turn the lamp on or off. The LED lamp provides instant full brightness without any warm-up time.
- Dimming Function: If connected to a compatible dimmer switch, adjust the dimmer to achieve your desired light level. This lamp is designed to work with many conventional dimmers. For optimal performance and to avoid issues like flickering or buzzing, ensure your dimmer is specifically rated for LED lamps.
5. Maintenance
The OSRAM LED Superstar Classic A60 lamp requires minimal maintenance.
- Cleaning: Ensure the power is off and the lamp is cool before cleaning. Wipe the lamp with a soft, dry cloth. Do not use liquid or abrasive cleaners, as they may damage the lamp.
- No User Serviceable Parts: This lamp contains no user-serviceable parts. Any attempt to open or modify the lamp will void the warranty and may create a safety hazard.
6. Troubleshooting
If you encounter issues with your LED lamp, refer to the following common problems and solutions:
- Lamp Does Not Light Up:
- Check that the power supply to the fixture is on.
- Ensure the lamp is securely screwed into the E27 socket.
- Test the lamp in another working fixture to rule out a faulty fixture.
- Lamp Flickers or Buzzes:
- This often indicates incompatibility with the dimmer switch. Ensure your dimmer is specifically designed for LED lamps.
- Ensure the dimmer's load range matches the lamp's wattage.
- Check for loose wiring in the fixture or switch.
- Reduced Brightness:
- If using a dimmer, ensure it is set to maximum brightness.
- Verify the lamp's specifications match your expectations for brightness.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | OSRAM |
| Model Name | Retrofit Classic A (4058075054240) |
| Light Type | LED |
| Special Feature | Dimmable |
| Bulb Shape Size | A60 (A19 equivalent) |
| Bulb Base | E27 |
| Wattage (LED) | 6.5 Watts (7 Watts listed on packaging) |
| Incandescent Equivalent | 60 Watts |
| Brightness | 806 Lumens |
| Light Color | Warm White |
| Color Temperature | 2700 Kelvin |
| Voltage | 220-240 Volts, 50 Hertz |
| Average Life | 15,000 Hours |
| Color Rendering Index (CRI) | ≥ 80 (60 listed in some specs, using higher value from product description) |
| Product Dimensions | 4.33 x 2.36 x 2.44 inches (11 x 6 x 6.2 cm) |
| Item Weight | 1.13 ounces (32 Grams) |
| Material | Copper (base), Glass (bulb) |
| Efficiency Class | F (New Energy Label) |
Product Data and Energy Label Information
For detailed product information and energy efficiency data, please refer to the official EPREL database:
- Product Data Sheet: View EPREL Product Data (QR Code from Image 3)
- Energy Label: View EPREL Energy Label (QR Code from Image 4)
Image 3: Product data sheet for the OSRAM LED lamp, including detailed technical specifications and an EPREL QR code.
Image 4: EU Energy Label indicating the energy efficiency class and consumption of the OSRAM LED lamp.
8. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official OSRAM website. Keep your proof of purchase for any warranty claims.
If you experience any issues not covered in the troubleshooting section, please contact OSRAM customer service or your retailer for assistance.
