GIGABYTE GP-AP850GM

GIGABYTE GP-AP850GM 850W Modular Power Supply User Manual

Model: GP-AP850GM | Brand: GIGABYTE

Product Overview

The GIGABYTE GP-AP850GM is an 850W modular power supply designed for personal computers. It features a fully modular design, allowing for cleaner cable management and improved airflow within your PC case. This power supply is 80 PLUS Gold certified, ensuring high efficiency of over 90% at 50% load, which reduces heat generation and operating costs. It incorporates 100% high-quality Japanese capacitors for enhanced reliability and a 135mm smart ball bearing fan with a fan stop function for quiet operation under low loads. Comprehensive protection mechanisms including OCP (Over Current Protection), OTP (Over Temperature Protection), OVP (Over Voltage Protection), OPP (Over Power Protection), UVP (Under Voltage Protection), and SCP (Short Circuit Protection) are integrated to safeguard your system components.

Key features include:

Angled view of the GIGABYTE GP-AP850GM power supply, showing the AORUS logo and model name.

Image: Angled view of the GIGABYTE GP-AP850GM power supply, highlighting the AORUS branding and modular design.

Setup and Installation

Before beginning installation, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge damage to components.

Component Checklist:

Installation Steps:

  1. Prepare your PC Case: Open your PC case and locate the power supply mounting area, usually at the bottom or top rear.
  2. Mount the Power Supply: Carefully slide the GP-AP850GM into the designated slot. Ensure the fan is facing the correct direction (typically downwards if there's a vent, or upwards if not). Secure the power supply with the provided mounting screws.
  3. Connect Essential Cables:
    • 24-pin ATX Motherboard Cable: Connect the large 24-pin cable to the corresponding port on your motherboard.
    • 8-pin EPS/CPU Cable: Connect the 4+4-pin CPU cable to the 8-pin or 4-pin CPU power connector on your motherboard.
    • PCIe Cables: For graphics cards, connect the 6+2-pin PCIe cables to your GPU. Use separate cables for each connector on the GPU if possible for optimal power delivery.
    • SATA Power Cables: Connect SATA power cables to your storage drives (SSDs, HDDs) and optical drives.
    • Peripheral Cables: Connect peripheral cables to any other components requiring Molex power, such as case fans or older accessories.

    Important: Ensure all modular cables are securely connected to both the power supply and the respective components. The cables for this power supply are specific to GIGABYTE; do not attempt to use cables from other brands as this can cause damage.

  4. Cable Management: Route cables neatly behind the motherboard tray or in other designated areas to improve airflow and aesthetics.
  5. Close Case and Connect AC Power: Close your PC case, connect the AC power cord to the power supply, and then plug it into a wall outlet.
Rear view of the GIGABYTE GP-AP850GM power supply showing modular cable connections.

Image: Rear panel of the GP-AP850GM, illustrating the clearly labeled ports for modular cable connections including 24-pin ATX, PCI-E & CPU, and Peripheral & SATA.

Operating Instructions

Once installed, the GIGABYTE GP-AP850GM power supply operates automatically with your system. Ensure the power switch on the back of the PSU is in the 'ON' position before powering on your computer.

Fan Stop Function:

The GP-AP850GM features a smart fan with a fan stop function. This means the fan will remain off during low load conditions to provide silent operation. As the system load and temperature increase, the fan will automatically start spinning to maintain optimal cooling. This is a normal operating characteristic and not an indication of a malfunction.

Power Efficiency:

The 80 PLUS Gold certification indicates that the power supply operates with high efficiency, converting more AC power into usable DC power for your components and minimizing wasted energy as heat. This contributes to a cooler system and lower electricity consumption.

Maintenance

Proper maintenance can extend the lifespan of your power supply and ensure stable system operation.

Top view of the GIGABYTE GP-AP850GM power supply, showing the fan grille and AORUS logo.

Image: Top view of the GP-AP850GM, featuring the honeycomb fan grille and central AORUS logo, indicating the fan's location for cooling.

Troubleshooting

If you encounter issues with your GIGABYTE GP-AP850GM power supply, refer to the following common troubleshooting steps:

If these steps do not resolve your issue, please contact GIGABYTE customer support or consult a qualified technician.

Specifications

FeatureDetail
BrandGIGABYTE
Model NameGP-AP850GM
Item Model NumberGP-AP850GM-UK
Form FactorATX
Output Power850 Watts
Efficiency Certification80 PLUS Gold (Over 90% efficiency at 50% load)
Cooling MethodAir (135mm smart ball bearing fan with fan stop function)
Capacitors100% Japanese Capacitors
Connector TypePCI Express, SATA
Number of SATA Connectors9
EPS Power Connector8-pin
Protection FeaturesOCP, OTP, OVP, OPP, UVP, SCP
Device CompatibilityPersonal Computer
Item Dimensions (L x W x H)16 x 15 x 8.6 centimeters
Item Weight9 Grams

Warranty Information

The GIGABYTE GP-AP850GM power supply comes with a manufacturer's warranty. Please refer to the official GIGABYTE website or your product packaging for the most current and region-specific warranty details.

Retain your proof of purchase for warranty claims.

Support

For further assistance, technical support, or to download the latest drivers and utilities for your GIGABYTE product, please visit the official GIGABYTE website.

GIGABYTE Official Website: Visit GIGABYTE Store on Amazon (This link directs to the GIGABYTE brand store on Amazon.fr, for general support, please search for the official GIGABYTE global website.)

When contacting support, please have your product model (GP-AP850GM) and serial number ready.