HOROW HWMT-8733
Contents
HOROW HWMT-8733 One Piece Toilet User Manual
Model: HWMT-8733 | Brand: HOROW
Product Overview
The HOROW HWMT-8733 is a compact, one-piece toilet designed for modern bathrooms, especially those with limited space. It features a powerful and quiet dual-flush system, a comfortable 16.5-inch seat height, and a fully glazed bowl for easy cleaning. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your toilet.

Figure 1: HOROW HWMT-8733 One Piece Toilet.
Key Features
- Compact Design: Measures 25"D x 13.4"W x 28.4"H, ideal for small bathrooms and tight spaces.
- Comfort Height: 16.5-inch seat height for easier sitting and standing.
- Dual Flush System: Offers 1.6 GPF (gallons per flush) for full flush and 1.1 GPF for light flush, promoting water efficiency.
- Easy to Clean: Fully glazed bowl and one-piece skirted design minimize areas for dirt accumulation.
- Soft-Closing Seat: PP seat closes quietly, preventing slamming.
- Standard Rough-In: Designed for a 12-inch rough-in installation.
- Certifications: cUPC, UPC, CEC compliant.

Figure 2: HWMT-8733 Toilet Features.
Installation
The HOROW HWMT-8733 toilet is designed for straightforward installation. It comes with pre-installed components to simplify the process.
Before You Begin
- Ensure you have all included components: toilet, soft-closing toilet seat, pre-installed flush valve, high-quality wax ring, and floor bolts.
- Verify your rough-in measurement is 12 inches.
- Turn off the water supply to the existing toilet and flush to empty the tank.
- Remove the old toilet and clean the flange area thoroughly.
Installation Steps (Summary)
- Install the floor bolts onto the toilet flange.
- Place the wax ring around the toilet's waste outlet.
- Carefully set the toilet onto the floor bolts, ensuring proper alignment with the wax ring and flange.
- Secure the toilet to the floor using the provided nuts and washers, tightening them evenly.
- Connect the water supply line to the toilet's fill valve.
- Turn on the water supply and check for leaks.
- Install the soft-closing toilet seat. The side access points facilitate easier installation.

Figure 3: Inlet Valve Suggested Location.

Figure 4: Rear Dimensions and Inlet Valve Details.
Operation
The HOROW HWMT-8733 features a dual-flush system for efficient water usage.
Dual Flush Mechanism
- Light Flush (1.1 GPF): Press the smaller button on the top of the tank for liquid waste. This option conserves water.
- Full Flush (1.6 GPF): Press the larger button on the top of the tank for solid waste. This provides a powerful flush to ensure the bowl is clean.
Soft-Closing Seat
The toilet seat is designed to close slowly and quietly. Simply push the seat down gently, and it will lower itself without slamming, preventing noise and potential damage.

Figure 5: Soft-Closing Seat in action.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your HOROW toilet.
Cleaning the Toilet
- The fully glazed bowl is designed to resist stains and make cleaning easy. Use a mild, non-abrasive bathroom cleaner and a soft brush or cloth.
- For the exterior, including the skirted trapway, wipe with a damp cloth and mild detergent. Avoid harsh chemicals or abrasive scrubbers that can damage the ceramic finish.
- Clean the toilet seat with a soft cloth and mild soap. Avoid strong disinfectants that may degrade the plastic material over time.
Seat Maintenance
The upgraded toilet seat is designed for stability and durability. If the seat becomes loose, gently tighten the mounting bolts accessible from the side. Do not overtighten.

Figure 6: Upgraded Toilet Seat Features.
Troubleshooting
This section addresses common issues you might encounter with your HOROW HWMT-8733 toilet. For more detailed troubleshooting, refer to the official Troubleshooting Guide PDF available on the product page.
| Problem | Possible Cause | Solution |
|---|---|---|
| Toilet not flushing properly (weak flush) | Low water level in tank, clogged siphon jet or rim holes, flapper not opening fully. | Adjust water level in tank, clean siphon jet/rim holes, check flapper chain for kinks or proper length. |
| Toilet runs continuously | Flapper not sealing, fill valve malfunction, float ball out of adjustment. | Check flapper for debris or wear, adjust float ball, inspect fill valve. |
| Water leaks from base of toilet | Loose floor bolts, faulty wax ring, cracked toilet base. | Tighten floor bolts (do not overtighten), replace wax ring, contact support if ceramic is cracked. |
If issues persist, please contact HOROW customer support for assistance.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | HWMT-8733 |
| Color | White |
| Product Dimensions (D x W x H) | 25" x 13.4" x 28.4" |
| Material | Ceramic (Toilet), Plastic (Seat) |
| Item Weight | 90 Pounds |
| Installation Type | Floor Mounted |
| Shape | Round |
| Flush Type | Dual (1.6 GPF / 1.1 GPF) |
| Rough-In | 12 Inches |
| Seat Height | 16.5 inches |
| Certification | CEC, Energy Star, cUPC |
| Included Components | Toilet, Soft Closing Toilet Seat, Pre-installed Flush Valve, Wax Ring, Floor Bolts, Installation Instruction Manual |

Figure 7: Detailed Product Dimensions.
Warranty and Support
HOROW is committed to providing high-quality products and excellent customer service.
Warranty Information
The HOROW HWMT-8733 toilet comes with a 2-year limited warranty. Additionally, HOROW offers lifetime after-sales service for this product. This warranty covers defects in materials and workmanship under normal use.
Customer Support
If you encounter any issues or have questions regarding your HOROW product, please contact our customer service center. We aim to respond to messages within 12 hours.
- Email: support@horow.com
- Seller: Horow (via Amazon)
For additional resources, you may refer to the official User Manual (PDF), Installation Manual (PDF), and Troubleshooting Guide (PDF) provided by HOROW.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.