Garosa Garosam1bcgxezty-02
Garosa Single Cold Water Faucet Instruction Manual
Model: Garosam1bcgxezty-02
Product Overview
The Garosa Single Cold Water Faucet is a versatile and durable tap designed for various applications including kitchen sinks, laundry rooms, and washing machines. It features a single handle for easy operation and a compact design for convenient installation.
- Durable Construction: Made from ABS plastic with chrome finish for long-lasting use.
- Multipurpose Use: Can be used for washing machine, kitchen faucet, laundry and more.
- Single Handle Design: Features a single handle with lever mechanism for easy use.
- Compact Size: Measures 1 inch diameter with 1/2 inch thread for compact installation.
- Easy Installation: Can be installed in a single hole with included mounting hardware.
Figure 1: Front view of the Garosa Single Cold Water Faucet, showcasing its chrome finish and single lever handle.
Video 1: An overview of the Garosa Single Cold Water Faucet, demonstrating its design and potential applications in kitchen, laundry, and washing machine setups.
Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Always turn off the main water supply before beginning any installation or maintenance.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Ensure all connections are secure and watertight to prevent leaks.
- Do not overtighten connections, as this may damage the faucet or plumbing.
- If you are unsure about any part of the installation process, consult a qualified plumber.
Parts List
Verify that all components are present before beginning installation.
| Part | Description | Quantity |
|---|---|---|
| Faucet Body | Single cold water tap with G1/2 thread | 1 |
| Handle | Integrated lever handle for water flow control | 1 |
| Mounting Hardware | Necessary components for single-hole installation | 1 set |
Figure 2: Diagram showing the dimensions of the Garosa Single Cold Water Faucet (9.5cm height, 11.5cm length).
Setup and Installation
This faucet is designed for easy single-hole installation. Follow these steps carefully:
- Prepare the Installation Area: Turn off the main water supply to the installation location. Clear the area around the mounting hole.
- Insert the Faucet: Place the faucet body into the pre-drilled single mounting hole on your sink, laundry tub, or wall. Ensure the G1/2 thread aligns correctly.
- Secure the Faucet: From underneath the mounting surface, attach the provided mounting hardware. Hand-tighten first, then use a wrench to gently secure the faucet, ensuring it is stable and does not wobble. Do not overtighten.
- Connect Water Supply: Connect the cold water supply line to the G1/2 threaded inlet on the faucet. Use appropriate plumbing tape or sealant on the threads to ensure a watertight seal.
- Check for Leaks: Once all connections are secure, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, turn off the water supply, tighten the connection, and recheck.
Figure 3: The Garosa faucet installed and dispensing water, demonstrating its quick opening spool angle for ease of use.
Operating Instructions
The Garosa Single Cold Water Faucet is simple to operate:
- To turn on the water, lift the lever handle upwards.
- To turn off the water, push the lever handle downwards.
- The faucet provides a single stream of cold water.
Figure 4: The faucet in operation, highlighting its single water outlet and separate control handle for precise water flow.
Maintenance
Regular maintenance will help prolong the life and appearance of your faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.
- Mineral Deposits: If mineral deposits accumulate around the spout, gently remove them using a solution of equal parts white vinegar and water. Rinse thoroughly after cleaning.
- Leak Checks: Periodically check all connections for any signs of leaks. Tighten connections as needed, but do not overtighten.
Troubleshooting
If you encounter issues with your Garosa faucet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from connections | Loose connections or insufficient sealant. | Turn off water supply, tighten connections, and ensure proper use of plumbing tape/sealant. |
| Low water flow | Clogged aerator or partially closed water supply valve. | Clean the aerator (if applicable) or ensure the water supply valve is fully open. |
| Faucet does not turn off completely | Worn internal components (e.g., disc valve). | Contact customer support for assistance or replacement parts. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Garosa |
| Model Name | Single Cold Water Tap |
| Model Number | Garosam1bcgxezty-02 |
| Material | ABS (Acrylonitrile Butadiene Styrene) |
| Finish Type | Chrome |
| Mounting Type | Deck Mount |
| Number of Handles | 1 (Lever Handle) |
| Hole Count | 1 |
| Valve Type | Disc Valve |
| Item Weight | 0.06 Kilograms (2.11 ounces) |
| Product Dimensions | 0.39 x 0.39 x 0.39 inches (approx. 11.5cm length x 9.5cm height) |
| Thread Size | G1/2 |
Warranty and Support
The Garosa Single Cold Water Faucet comes with a limited warranty. For specific warranty details or technical support, please refer to the product packaging or contact Garosa customer service.
For further assistance, you may visit the official Garosa store on Amazon: Garosa Store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.