Introduction
This manual provides instructions for the proper installation, operation, and maintenance of your evernice Foot Control Pedal. This high-quality speed control foot pedal with lead cord is designed for use with 110V Necchi Old Style BU, BU Nova, Nova, and Nora sewing machines. Please review this manual thoroughly before use to ensure safe and efficient operation.
Important Safety Information
- Always disconnect the sewing machine from the power outlet before installing, removing, or cleaning the foot control pedal.
- Ensure the foot control pedal is placed on a stable, flat surface during operation to prevent accidental movement.
- Do not use the pedal if the cord or connector is damaged. Contact customer support for replacement.
- This pedal is designed for 110V electrical systems. Do not use with other voltage systems.
- Keep the pedal away from water or excessive moisture.
- This product is intended for use with compatible Necchi sewing machines only. Using it with incompatible machines may cause damage.
Package Contents
- 1 x evernice Foot Control Pedal with Lead Cord (Model: FC-60123-32-110V)
Setup and Installation
Before connecting the foot control pedal, ensure your sewing machine is unplugged from the power source.
- Verify Connector Compatibility: Carefully examine the shape and size of the 3-pin connector on your new evernice foot pedal and compare it to the socket on your Necchi sewing machine. It is crucial that these match to ensure proper and safe connection. The connector is a 3-pin style.
- Connect the Pedal: Align the 3-pin connector of the foot pedal with the corresponding receptacle on your sewing machine. Gently push the connector firmly into place until it is fully seated. Do not force the connection.
- Plug into Power: Once the foot pedal is securely connected to the sewing machine, plug the power cord into a standard 110V electrical outlet.
Figure 1: 3-Pin Connector Dimensions. Ensure your sewing machine's receptacle matches these dimensions for a secure fit.
Figure 2: evernice Foot Control Pedal. This image shows the complete pedal unit with its power cord and connector.
Operating Instructions
The evernice Foot Control Pedal provides variable speed control for your Necchi sewing machine.
- Power On: Ensure your sewing machine's power switch is in the "ON" position.
- Control Speed: Place your foot on the pedal. Press down gently to start the machine at a slow speed. Increase pressure on the pedal to increase the sewing speed. Release pressure to slow down, and fully release to stop the machine.
- Practice: If you are new to foot pedal operation, practice controlling the speed on a scrap piece of fabric before beginning your project.
Maintenance
- Cleaning: Disconnect the pedal from the power source and the sewing machine before cleaning. Wipe the pedal surface with a soft, dry cloth. Do not use liquid cleaners or immerse the pedal in water.
- Storage: When not in use, store the pedal in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid coiling the cord too tightly to prevent damage.
- Inspection: Periodically inspect the cord and connector for any signs of wear, cuts, or damage. If damage is found, discontinue use and replace the pedal.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sewing machine does not start when pedal is pressed. |
|
|
| Inconsistent speed control. |
|
|
Specifications
| Model: | FC-60123-32-110V |
| Brand: | evernice |
| Input Voltage: | 110-120V |
| Frequency: | 50/60Hz |
| Max Current: | 1.4A |
| Connector Type: | 3-Pin Style |
| Compatible Machines: | Necchi Old Style BU, BU Nova, Nova, Nora sewing machines |
| Equivalent Part #: | 60123-32 |
Figure 3: Pedal Bottom View with Specifications. This image displays the electrical ratings of the foot control pedal.
Warranty and Support
For warranty information or technical support, please contact the evernice customer service department. Refer to your purchase documentation for specific contact details or visit the official evernice website.
When contacting support, please have your product model number (FC-60123-32-110V) and purchase date available.