Rybozen BH061 2.4 GHz Digital Wireless TV Headphones User Manual

1. Introduction

Thank you for choosing the Rybozen BH061 2.4 GHz Digital Wireless TV Headphones. This manual provides detailed instructions for setting up, operating, and maintaining your new headphones. Please read this manual thoroughly before use to ensure proper functionality and to maximize your listening experience.

These headphones are designed to provide clear, high-quality audio from your TV, DVD player, HiFi system, or other audio sources, allowing for private listening without disturbing others. The 2.4 GHz digital hopping system technology ensures a stable wireless connection with a range of up to 50 meters.

2. Package Contents

Verify that all items listed below are included in your package:

• Rybozen BH061 Wireless Headphones
• Charging Station / Transmitter
• Power Adapter (DC 5V)
• 3.5mm Audio Cable
• RCA Audio Cable (Red/White)
• Optical Audio Cable (TOSLINK)
• User Manual (this document)

Figure 2.1: Contents of the Rybozen BH061 package.

3. Product Overview

3.1 Transmitter / Charging Station

Figure 3.1: Transmitter/Charging Station Rear Panel.

1. OFF/ON Switch: Powers the transmitter on or off.
2. AUDIO-IN (3.5mm): Connects to audio sources via 3.5mm cable.
3. DC=5V: Power input for the transmitter.
4. OPTICAL: Connects to audio sources via optical TOSLINK cable.
5. SCAN: Button to initiate frequency scanning for headphone pairing.

3.2 Wireless Headphones

Figure 3.2: Headphone Controls and Features.

• ON/OFF Button: Powers the headphones on or off.
• VOL+ / VOL- Buttons: Adjusts the listening volume.
• SCAN Button: Initiates frequency scanning to connect with the transmitter.
• Charging Port: Located on the underside of the headband, connects to the charging pins on the transmitter.
• 3.5mm Input: Allows for wired connection to audio sources (cable not included for this specific use).

4. Setup Guide

Follow these steps to set up your Rybozen BH061 wireless headphones and transmitter.

4.1 Powering the Transmitter

1. Connect the provided power adapter to the "DC=5V" port on the back of the transmitter.
2. Plug the power adapter into a wall outlet.
3. Flip the "OFF/ON" switch on the transmitter to the "ON" position. The power indicator light should illuminate.

4.2 Connecting to an Audio Source

Choose one of the following connection methods based on your audio source's available output ports:

Option A: Optical (TOSLINK) Connection (Recommended for Digital Audio)

1. Remove the protective caps from both ends of the optical audio cable.
2. Connect one end of the optical cable to the "OPTICAL" port on the transmitter.
3. Connect the other end of the optical cable to the optical audio output port (often labeled "Optical Out" or "TOSLINK") on your TV or audio device.
4. Ensure your TV's audio output settings are configured to "PCM" or "Stereo" if you experience no sound. (Dolby Digital/DTS are not supported).

Option B: RCA (Red/White) Connection

1. Connect the red and white plugs of the RCA audio cable to the corresponding red and white "AUDIO-OUT" ports on your TV or audio device.
2. Connect the 3.5mm end of the RCA cable adapter to the "AUDIO-IN" (3.5mm) port on the transmitter.

Option C: 3.5mm AUX Connection

1. Connect one end of the 3.5mm audio cable to the "AUDIO-IN" (3.5mm) port on the transmitter.
2. Connect the other end of the 3.5mm audio cable to the 3.5mm audio output port (often labeled "Headphone Out" or "AUX Out") on your TV or audio device.

5. Operating Instructions

5.1 Powering On/Off Headphones

• To power on the headphones, press and hold the "ON/OFF" button on the right earcup until the indicator light illuminates.
• To power off the headphones, press and hold the "ON/OFF" button again until the indicator light turns off.

5.2 Connecting Headphones to Transmitter

The headphones and transmitter should automatically pair when both are powered on and within range. If they do not connect:

1. Ensure the transmitter is powered on and receiving an audio signal.
2. Power on the headphones.
3. Press the "SCAN" button on the transmitter.
4. Press the "SCAN" button on the headphones. The headphones will search for the transmitter's signal. Once connected, the indicator light on the headphones will become solid.

5.3 Adjusting Volume

Use the "VOL+" and "VOL-" buttons on the headphones to adjust the listening volume to your preference.

6. Charging the Headphones

The Rybozen BH061 headphones feature built-in rechargeable Li-ion batteries. A full charge provides approximately 18 hours of use.

1. Ensure the transmitter is powered on and connected to a power source.
2. Place the headphones onto the charging station, aligning the charging contacts on the headphones with the charging pins on the station.
3. The charging indicator light on the transmitter (or headphones, depending on model variation) will show the charging status.
4. Charging typically takes about 5-6 hours for a full charge. The headphones will automatically stop charging once fully charged.

Figure 6.1: Headphones on Charging Station.

7. Maintenance and Care

• Clean the headphones and transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Store the headphones on the charging station when not in use to keep them charged and ready.

8. Troubleshooting

9. Specifications

10. Important Safety Information

• Do not use the headphones at excessively high volumes for extended periods to prevent hearing damage.
• Keep the device away from water and moisture. While described as 'waterproof', it is generally resistant to splashes, not full submersion.
• Do not expose batteries to excessive heat or direct flame.
• Dispose of batteries and electronic components responsibly according to local regulations.
• This product is not a toy. Keep out of reach of children.