Sojag 10' x 10' Sanibel II Hardtop Gazebo Instruction Manual

Introduction

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Sojag 10' x 10' Sanibel II Hardtop Gazebo. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The Sojag 10' x 10' Sanibel II Hardtop Gazebo, featuring a light grey aluminum frame and galvanized steel roof, set up in an outdoor patio area.

Safety Information

• Read All Instructions: Ensure all assembly and usage instructions are thoroughly understood before proceeding.
• Assembly Safety: Assembly requires careful attention to safety instructions. It is recommended that at least two people participate in the assembly process. Wear appropriate safety gear, such as gloves and eye protection.
• Anchoring: The gazebo must be properly anchored to the ground to ensure stability and prevent damage from wind. Failure to do so may result in injury or damage to the product.
• Snow Accumulation: Remove any snow accumulation from the roof promptly to preserve the durability and stability of the gazebo structure. Heavy snow can cause the roof to collapse.
• Fire Safety: Keep all sources of ignition and open flames away from the gazebo. The mosquito netting meets CPAI-84 flame-resistant international safety standards, but direct exposure to flame should be avoided.
• Structural Integrity: Do not hang heavy objects from the gazebo frame or roof. Do not climb on the gazebo structure.
• Weather Conditions: In extreme weather conditions (e.g., strong winds, heavy snowfall), it is advisable to remove mosquito netting and any other removable fabric components to prevent damage.

Parts List

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Key Components:

• (1) Gazebo structure and required hardware
• (1) Gazebo roof kit (galvanized steel panels)
• (1) Mosquito netting kit (nylon)
• Instruction Manual (this document)

Frame Materials:

• Frame Material: Aluminum (light grey powder-coated)
• Roof Material: Galvanized Steel (light grey powder-coated)

Setup and Assembly

Assembly typically requires 2-3 people and can take approximately 4-5 hours. Follow the numbered steps in the included printed instruction manual for detailed diagrams and hardware identification. Ensure all connections are secure before proceeding to the next step.

Key Assembly Steps:

1. Unpack and Identify: Carefully unpack all components and lay them out. Identify each part using the provided parts list and diagrams.
2. Assemble Frame Posts: Connect the sections of the aluminum frame posts according to the instructions.
3. Attach Crossbars: Secure the horizontal crossbars to the top of the assembled posts.
4. Install Roof Supports: Attach the diagonal braces and intermediate beams that will support the roof panels.
5. Install Roof Panels: Carefully slide and secure the galvanized steel roof panels into place. Ensure proper overlap and sealing to prevent leaks.
6. Attach Mosquito Netting Tracks: The gazebo features a double-track system for easy installation of the mosquito netting.
7. Install Mosquito Netting: Hang the nylon mosquito netting onto the tracks.
8. Anchor Gazebo: Securely anchor the gazebo to a solid surface using appropriate hardware (e.g., expansion bolts for concrete, ground anchors for soft ground).

Image: A front view of the fully assembled Sojag Sanibel II Hardtop Gazebo, showcasing its structure and mosquito netting.

Operating Instructions

Mosquito Netting:

The gazebo includes nylon mosquito netting designed to keep pests away. The double-track system allows for easy opening and closing. When not in use, the netting can be tied back to the posts using the integrated straps.

Image: A detailed view of the double-track system, illustrating how the mosquito netting is installed and can be easily moved.

General Use:

• The hardtop roof provides shade and protection from rain, allowing for comfortable outdoor enjoyment.
• The robust aluminum frame and galvanized steel roof are designed for year-round use, provided proper maintenance is followed.

Maintenance

• Cleaning: Clean the aluminum frame and steel roof with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Mosquito Netting Care: The nylon netting can be hand-washed with mild soap and water. Ensure it is completely dry before storing or tying back to prevent mildew.
• Snow Removal: It is crucial to remove any snow accumulation from the gazebo roof to preserve its durability and stability. Do not allow heavy snow loads to remain on the roof.
• Seasonal Protection: Sojag winter covers are available and sold separately to protect your gazebo structure from harsh winter elements. Consider purchasing one for extended longevity.
• Fastener Check: Periodically check all bolts and fasteners to ensure they remain tight and secure. Tighten as necessary.

Troubleshooting

• Gazebo Instability: Ensure the gazebo is properly anchored to a solid, level surface. Check all frame connections for tightness.
• Water Leakage from Roof: Verify that all roof panels are correctly installed and overlap as per assembly instructions. Check for any loose fasteners or damaged panels.
• Mosquito Netting Issues: If netting is not sliding smoothly, check tracks for obstructions or damage. Ensure netting is properly aligned within the double-track system.
• Corrosion/Rust: The frame is powder-coated aluminum and the roof is galvanized steel, both treated to resist rust and corrosion. If signs appear, clean the area and apply a suitable protective coating.

Specifications

Image: Technical drawing illustrating the dimensions of the Sojag Sanibel II Gazebo.

Warranty

The Sojag 10' x 10' Sanibel II Hardtop Gazebo comes with a 1-year limited warranty. Please retain your proof of purchase for any warranty claims. The warranty covers manufacturing defects under normal use and conditions. It does not cover damage due to improper assembly, lack of maintenance, extreme weather conditions, or unauthorized modifications.

Image: A graphic representation of the 1-year limited warranty for the product.

Support

For technical assistance, missing parts, or warranty inquiries, please contact Sojag customer support. Refer to the contact information provided in your product packaging or visit the official Sojag website.

Manufacturer: ShelterLogic