Revell RV63942 Airbus A320 Neo 'Lufthansa' Model Set Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, care, and maintenance of your Revell RV63942 Airbus A320 Neo 'Lufthansa' 1/100 scale model kit. This kit is designed for advanced model builders and requires experience in gluing and painting. Please read all instructions carefully before beginning assembly.

The kit contains 51 pieces to construct a detailed replica of the Airbus A320 Neo in Lufthansa livery.

Safety Information

• Age Recommendation: This model kit is suitable for ages 12 and up. Adult supervision is recommended for younger builders.
• Small Parts: The kit contains small parts which may pose a choking hazard. Keep out of reach of small children.
• Adhesives and Paints: Use model-specific adhesives and paints in a well-ventilated area. Avoid inhaling fumes. Follow the safety instructions provided with your chosen glues and paints.
• Sharp Tools: Assembly may require the use of sharp tools (e.g., hobby knife, tweezers). Handle with care to prevent injury.

Tools and Materials Required

To successfully assemble your model kit, you will need the following:

• Model Cement/Glue (plastic cement recommended)
• Hobby Knife or Sprue Cutters
• Fine Sandpaper or Emery Board
• Model Paints (acrylic or enamel, as per desired finish)
• Paint Brushes (various sizes)
• Tweezers (for small parts)
• Masking Tape (for painting)
• Clean Cloths

Assembly Instructions

Before starting, carefully review all parts and the included diagram. Ensure you have all 51 pieces. Test-fit parts before applying glue.

Image: The Revell Airbus A320 Neo 'Lufthansa' model kit box, showing the completed aircraft model.

1. Part Preparation: Carefully remove all parts from the sprues using a hobby knife or sprue cutters. Clean any excess plastic (flash) from the parts using a hobby knife or fine sandpaper.
2. Fuselage Assembly: Join the two halves of the fuselage. Apply a thin layer of model cement to the mating surfaces and press firmly together. Hold in place until the glue sets.
3. Wing Assembly: Assemble the wing sections according to the diagram. Attach the completed wing assembly to the fuselage. Ensure proper alignment.
4. Tail Section: Attach the horizontal and vertical stabilizers to the rear of the fuselage.
5. Engine Nacelles: Assemble the engine nacelles and attach them to the wings.
6. Landing Gear: Assemble and attach the landing gear components. Ensure they are securely fixed if you intend to display the model on its wheels.
7. Detail Parts: Attach smaller detail parts such as antennas, lights, and other external features.
8. Painting: Once the main assembly is complete and the glue has fully cured, prepare the model for painting. Apply primer if desired, then paint the model according to the Lufthansa livery or your preferred scheme. Allow each coat of paint to dry thoroughly.
9. Decals: Apply the provided decals using decal setting solution for a smooth finish. Follow the decal placement guide carefully.
10. Final Coat: Apply a clear coat (matte or gloss) to protect the paint and decals.

Note: Refer to the detailed assembly diagram included in your kit for specific part numbers and placement.

Display and Handling

Once your Revell Airbus A320 Neo model is fully assembled and painted, it is ready for display. Handle the model carefully to avoid damaging delicate parts or paintwork. Choose a stable, dust-free location away from direct sunlight and extreme temperatures to preserve its condition.

Maintenance

To keep your model in pristine condition:

• Cleaning: Gently dust the model regularly with a soft, dry brush or a lint-free cloth. Avoid using water or chemical cleaners, as these can damage paint and decals.
• Storage: If storing the model, place it in a protective display case or a box lined with soft material to prevent dust accumulation and accidental damage.
• Repairs: In case of minor damage, use appropriate model cement and paints for repairs.

Troubleshooting Common Issues

Product Specifications

Warranty Information

As a model kit, this product typically does not come with a functional warranty. However, if you encounter any manufacturing defects or missing parts upon opening the kit, please contact Revell customer support directly. Retain your proof of purchase.

Customer Support

For further assistance, technical questions, or to report missing/defective parts, please visit the official Revell website or contact their customer service department. Contact information can usually be found on the product packaging or their official website.

Revell Official Website: www.revell.com