Introduction
This instruction manual provides comprehensive guidance for assembling and maintaining your Revell RV07685 1:24 Porsche 934 RSR 'Martini Racing' plastic model kit. This kit is designed for adult model enthusiasts and offers a detailed replica of the iconic racing car. Please read all instructions carefully before beginning assembly.
Setup and Assembly
The Revell RV07685 kit is a non-assembled plastic model kit requiring careful construction. Successful assembly depends on following the detailed instructions provided within the kit and using appropriate tools and materials.
Before You Begin
- Workspace: Ensure you have a clean, well-lit, and ventilated workspace.
- Tools: Gather essential modeling tools, which typically include: hobby knife or sprue cutters, plastic cement (glue), fine-grit sandpaper or sanding sticks, tweezers, and paint brushes.
- Paints: Prepare acrylic paints as specified in the kit's color guide.
- Read Instructions: Thoroughly review the illustrated multilingual assembly instructions included with your kit before starting.
Step-by-Step Assembly
- Part Preparation: Carefully remove parts from the sprues using a hobby knife or sprue cutters. Clean any excess plastic (flash) from the parts using a hobby knife or sandpaper.
- Test Fit: Before applying glue, test fit parts to ensure proper alignment and fit.
- Gluing: Apply plastic cement sparingly to the joining surfaces. Hold parts together firmly until the glue sets. Allow adequate drying time between steps.
- Painting: Paint parts according to the color guide provided in the kit. Apply thin, even coats for best results. Allow paint to dry completely before handling or assembling further.
- Decals: Apply decals as instructed. Use decal setting solutions if necessary to help them conform to irregular surfaces.
- Sub-Assemblies: Assemble smaller components (e.g., engine, interior, chassis) first, then integrate them into the main body structure.
- Final Assembly: Attach larger components such as the body, wheels, and exterior details.
Display and Handling
Once assembled, your Revell Porsche 934 RSR model is a static display piece. Handle it with care to prevent damage to delicate parts, paint, or decals.
- Display Location: Place the model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity.
- Handling: Always pick up the model by its main body or chassis, avoiding fragile components like mirrors, spoilers, or antennas.
- Protection: Consider displaying the model in a dust-proof display case to protect it from environmental elements and accidental damage.
Maintenance
Proper maintenance ensures the longevity and appearance of your model.
- Dusting: Regularly dust the model using a soft, dry brush or a can of compressed air. Avoid abrasive materials that could scratch the paint or decals.
- Cleaning: For stubborn dirt, lightly dampen a soft cloth with water (no harsh chemicals) and gently wipe the surface. Avoid excessive moisture.
- Storage: If storing the model for an extended period, ensure it is clean, dry, and placed in a protective container to prevent dust accumulation and physical damage.
Troubleshooting
Here are solutions to common issues encountered during model kit assembly or display.
| Issue | Solution |
|---|---|
| Parts do not fit together properly. | Ensure all flash (excess plastic) is removed. Test fit parts before gluing. If necessary, gently sand mating surfaces. |
| Paint appears uneven or clumpy. | Ensure paint is properly thinned and applied in multiple thin coats rather than one thick coat. Allow each coat to dry before applying the next. |
| Decals wrinkle or do not adhere. | Ensure the surface is smooth and glossy before application. Use decal setting solution to help decals conform and adhere. Gently blot excess water. |
| Small parts break during removal from sprue. | Use sharp, dedicated sprue cutters or a hobby knife. Cut parts away from the sprue with a small amount of sprue material still attached, then trim carefully. |
Specifications
Key technical details for the Revell RV07685 Porsche 934 RSR 'Martini Racing' model kit.
| Feature | Detail |
|---|---|
| Brand | Revell |
| Model Name | Revell 07685 7685 1:24 Porsche 934 RSR 'Martini Racing' Plastic Model Kit |
| Item Model Number | RV07685 |
| Scale | 1:24 |
| Number of Pieces | 104 |
| Material | Plastic |
| Paint Type Recommended | Acrylic |
| Included Components | Parts to make one model kit |
| Item Dimensions (L x W x H) | 9.45 x 3.94 x 3.94 inches |
| Item Weight | 9.3 ounces (265 Grams) |
| Age Range | Adult |
Warranty Information
This Revell model kit is typically covered by the manufacturer's standard warranty against defects in materials and workmanship. Due to the nature of model kits, which involve assembly and painting by the user, specific warranty terms may vary. Please refer to the packaging or the official Revell website for detailed warranty information and policies regarding missing or defective parts.
Support
For further assistance, questions regarding assembly, or to report missing/defective parts, please contact Revell customer support directly. Contact information can usually be found on the product packaging or on the official Revell website.
Official Revell Website: www.revell.com
