1. Product Overview
The HOSONGIN USB Guitar Cable is designed to connect your electric guitar directly to a computer, transforming your computer into a guitar amplifier and recording system. This plug-and-play device eliminates the need for additional hardware or drivers, offering a straightforward solution for musicians.
Key features include:
- Plug & Play Functionality: Connects directly to your guitar and computer without requiring extra drivers.
- Pristine Sound & Noise Reduction: Features an anti-jamming magnetic ring and a built-in 16BIT / 44.1KHZ digital-analog conversion chip for clear audio.
- Durable Construction: Equipped with a heavy-duty metal housing 6.35mm 1/4" TS Plug and spring protection to prevent cable breakage.
- Wide Compatibility: Supports Windows XP/VISTA/Win 7/Win 8/Win 10/Mac OS X systems and various recording software.
2. Safety Information
Please read and follow these safety guidelines to ensure safe operation and prolong the life of your HOSONGIN USB Guitar Cable:
- Avoid exposing the cable to extreme temperatures, direct sunlight, or high humidity.
- Do not attempt to disassemble or modify the cable. This may void the warranty and could lead to malfunction.
- Keep the cable away from liquids. If it comes into contact with liquid, disconnect it immediately and allow it to dry completely before reuse.
- Handle the connectors carefully. Avoid pulling the cable by the wire; always grasp the plug when connecting or disconnecting.
- Ensure the cable is not kinked or bent sharply, as this can damage internal wiring.
3. Setup Instructions
Follow these steps to connect your HOSONGIN USB Guitar Cable to your computer and instrument:
3.1 Hardware Connection
- Connect the 1/4" TS mono plug of the HOSONGIN USB Guitar Cable into the output jack of your electric guitar.
- Plug the USB Type-A connector of the cable into an available USB port on your computer (PC or Notebook).
- The cable is designed for plug-and-play operation, meaning your computer should automatically recognize it as an audio device without requiring manual driver installation.
3.2 Software Configuration (Windows 10 Example)
After connecting the cable, you may need to configure your computer's sound settings. The following steps are for Windows 10:
- Step 1: Right-click the speaker icon in the lower right corner of your computer screen and select "Sound".
- Step 2: In the "Recording" tab, select "USB Audio Device" as your sound card. If the device is not immediately visible, unplug and re-plug the USB cable. The "USB Audio Device" prompt should appear.
- Step 3: Select "Properties" for the "USB Audio Device" to proceed.
- Step 4: In the "Listen" tab, check "Listen to this device" and select your playback device (e.g., speakers or headphones) to monitor your guitar's sound. Click "OK" to apply changes.
NOTE: If the cable is not correctly connected or recognized, repeat steps 2-4.
4. Operating Instructions
Once the HOSONGIN USB Guitar Cable is connected and configured, you can begin using it with compatible software.
4.1 Compatible Software
The cable is compatible with most recording software and guitar amplifier simulations, including:
- Guitar Combo Amps
- Audacity
- Amplitude
- Yousician
Refer to your chosen software's documentation for specific instructions on selecting an audio input device. Typically, you will select "USB Audio Device" as your input.
4.2 Important Considerations
- Input Volume: When setting up your audio input, avoid setting the input volume to 0 in your computer's sound control panel. A setting around 50 is often a good balance to prevent static noise while maintaining sufficient loudness.
- Noise Reduction: The cable features an anti-jamming magnetic ring to eliminate noise. For optimal sound quality, ensure this magnetic ring is properly installed and positioned.
5. Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your HOSONGIN USB Guitar Cable:
- Cleaning: Use a soft, dry cloth to clean the cable and connectors. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, coil the cable loosely. Avoid tight coiling or sharp bends, which can damage the internal wires. The included velcro straps can assist with neat storage.
- Protection: The cable features spring protection at the 1/4" TS plug to prevent breakage. Avoid excessive strain on this connection point.
6. Troubleshooting
If you encounter issues with your HOSONGIN USB Guitar Cable, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound Output / Device Not Recognized |
|
|
| Static or Hum Noise |
|
|
| Intermittent Connection |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | HOSONGIN |
| Model Name | HOSONGIN |
| Connector Type | 1/4" TS Plug, USB Type A |
| Cable Type | USB |
| Compatible Devices | Laptop, Personal Computer |
| Special Feature | Magnetic (Anti-jamming magnetic ring) |
| Connector Gender | Male-to-Male |
| Frequency | 44.1 KHz |
| Connectivity Technology | USB |
| Gauge | 22 |
| Recommended Uses | Connecting electric guitars to computers for amplification and recording purposes |
| Color | Black PVC |
| Item Weight | 5 ounces |
| UPC | 734010140387 |
8. Warranty and Support
HOSONGIN is confident in the durability and performance of this USB Guitar Cable. While specific warranty terms are not detailed, for any questions or support needs, please do not hesitate to contact HOSONGIN customer service. Refer to the product packaging or the retailer's website for contact information.
9. Official Product Videos
HOSONGIN USB Guitar Cable Overview
Video 9.1: An official product video from HOSONGIN Sound, showcasing the USB Guitar Cable and its features. This video provides a visual demonstration of the product.
