kwmobile Headband Replacement Pad for Bose Quiet Comfort Headphones

1. Product Overview

The kwmobile headband replacement pad is designed to enhance comfort and provide protection for your headphone headband. Made from durable neoprene, this pad helps prevent discomfort during extended listening sessions and shields your original headband from dirt, wear, and scratches. Its discreet design integrates seamlessly with your headphones.

2. Compatibility

This headband replacement pad is compatible with the following Bose Quiet Comfort headphone models:

• Bose Quiet Comfort 2
• Bose Quiet Comfort 15 (QC15)
• Bose Quiet Comfort 25 (QC25)
• Bose Quiet Comfort 35 (QC35)
• Bose Quiet Comfort 2 (QC2)
• Bose Quiet Comfort 3 (QC3)
• Bose AE2
• Bose AE2i

3. Setup and Installation

Installing the kwmobile headband replacement pad is a straightforward process. Follow these steps for proper installation:

1. Unzip the Pad: Locate the zipper on the replacement pad and fully unzip it. This will open the pad, allowing it to be placed over your headphone headband.
2. Position the Pad: Carefully place the open pad over the existing headband of your compatible Bose headphones. Ensure the pad is centered and aligned with the headband.
3. Zip Up the Pad: Once the pad is correctly positioned, slowly close the zipper. Ensure that no part of the headphone headband or any cables are caught in the zipper teeth.
4. Adjust for Fit: After zipping, gently adjust the pad to ensure a snug and even fit along the entire length of the headband.

4. Operating Instructions

Once installed, the headband replacement pad operates passively by providing an additional layer of cushioning and protection. Simply wear your headphones as usual. The soft neoprene material is designed to reduce pressure on your head, enhancing overall comfort during use.

5. Maintenance

To ensure the longevity and cleanliness of your headband replacement pad, follow these maintenance guidelines:

• Cleaning: Wipe the pad regularly with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Allow to air dry completely before use.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the neoprene material.
• Storage: Store your headphones and pad in a clean, dry environment away from direct sunlight and extreme temperatures.
• Protection: The neoprene material offers some protection against light moisture. However, avoid submerging the pad in water or exposing it to heavy rain.

6. Troubleshooting

If you encounter any issues with your kwmobile headband replacement pad, consider the following:

• Pad Does Not Fit: Ensure your headphone model is listed under the compatibility section (Section 2). If it is, re-check the installation steps to ensure the pad is correctly aligned and fully zipped.
• Zipper Issues: If the zipper is difficult to close, ensure the pad is properly aligned and that no fabric or headphone material is obstructing the zipper path. Do not force the zipper.
• Discomfort: While designed for comfort, individual fit may vary. Ensure the pad is evenly distributed and not bunched up.

7. Specifications

8. Warranty and Support

For information regarding warranty coverage and terms, please refer to the documentation provided with your purchase or contact the retailer directly. For product support or further assistance, please visit the official kwmobile website or contact their customer service.