Introduction
Welcome to your new WOFI Valley Ceiling Light. This modern LED ceiling light features a sleek design, color temperature changing capabilities, a memory function, and a convenient remote control. Crafted with quality materials, it provides elegant illumination for any space.
Safety Information
- Read all instructions carefully before installation and use.
- Installation must be performed by a qualified electrician.
- Disconnect power before installation or maintenance.
- Do not expose the product to moisture or extreme temperatures.
- This product is for indoor use only.
- Keep out of reach of children.
WARNING: Risk of electric shock. Ensure power is off before handling.
Package Contents
- 1x WOFI Valley Ceiling Light
- 1x Remote Control
- Mounting Hardware (screws, anchors)
- User Manual
Image: The main WOFI Valley Ceiling Light unit, an oval-shaped LED fixture with a white diffuser and a silver-grey frame.
Image: The white remote control for the WOFI Valley Ceiling Light, showing buttons for brightness, color temperature, timer, and on/off functions.
Setup and Installation
- Safety First: Turn off the main power supply at the circuit breaker before beginning installation.
- Mounting the Fixture:
Mark the drilling points on the ceiling using the mounting bracket as a template.
Drill holes and insert appropriate wall anchors (if necessary).
Secure the mounting bracket to the ceiling with screws.
- Wiring Connection:
Connect the live (L), neutral (N), and ground (GND) wires from your ceiling to the corresponding terminals on the light fixture. Ensure connections are secure.
- Attaching the Light:
Carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
- Restore Power: Turn the main power supply back on.
Image: The WOFI Valley Ceiling Light mounted flush against a ceiling, demonstrating its low-profile design.
Operating Instructions
Remote Control Functions
The included remote control allows for full control over the light's features.
- Power On/Off: Press the "ON" or "OFF" button to turn the light on or off.
- Brightness Adjustment (Dimming): Use the brightness buttons (often marked with sun icons or +/-) to increase or decrease the light intensity.
- Color Temperature Change (CCT): Adjust the color temperature from warm white to cool white using the CCT buttons.
- Memory Function: The light remembers the last brightness and color temperature setting when turned off and on again.
- Sleep Mode / Night Light: Activate a low-brightness, warm light setting suitable for night use.
- Timer Function: Set the light to turn off automatically after a specified period (e.g., 30 minutes, 60 minutes).
Image: Close-up of the remote control, highlighting buttons for brightness, color temperature, and timer settings.
Care and Maintenance
- Cleaning: Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: This fixture uses integrated LED technology. LEDs are designed for long life and are not user-replaceable. If the light source fails, the entire fixture may need to be replaced.
- Inspection: Periodically check for any loose connections or damage.
Note: This product is an ambient product. Ambient products are lights that can be disassembled to check the light sources contained in the delivery separately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Loose wiring. Remote control battery low. | Check circuit breaker. Verify wiring connections (ensure power is off). Replace remote control battery. |
| Light flickers. | Unstable power supply. Loose connection. | Consult an electrician. Check wiring connections (ensure power is off). |
| Remote control not working. | Battery depleted. Obstruction between remote and light. Remote not paired. | Replace battery. Ensure clear line of sight. Refer to remote pairing instructions (if applicable). |
Technical Specifications
- Brand: WOFI
- Model Number: 9970.01.06.8100
- Dimensions (L x W x H): 100 x 50 x 5.2 cm (39.4 x 19.7 x 2.0 inches)
- Weight: 4.59 kg (10.12 lbs)
- Material: Plastic, Metal
- Color: White
- Light Source Type: Integrated LED
- Maximum Wattage: 45 Watts
- Luminous Flux: 3450 lm
- Energy Efficiency Class: A
- IP Rating: IP20 (Indoor use only)
- Special Features: Dimmable, Color Temperature Change, Memory Function, Remote Control, Sleep Mode
- Power Source: AC
- Batteries Required for Remote: Yes (Batteries included)
Image: Energy efficiency label showing class A rating.
Warranty and Customer Support
For warranty information and customer support, please refer to the purchase documentation or contact your retailer.
Manufacturer: WOFI
Country of Origin: Germany
Contact: Please visit the official WOFI website or contact their customer service for further assistance.
Note: Spare parts availability information is not available. Software updates are not guaranteed.
