Goetland HHD0001-02

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Goetland Stainless Steel Commercial Hand Dryer - Model HHD0001-02

Instruction Manual

1. Introduction

Thank you for choosing the Goetland Stainless Steel Commercial Hand Dryer, Model HHD0001-02. This automatic, high-speed hand dryer is designed for efficient and hygienic hand drying in various commercial and home environments. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the product's lifespan.

Goetland Stainless Steel Commercial Hand Dryer, Model HHD0001-02, in Baking Paint White finish.

Figure 1: Goetland Stainless Steel Commercial Hand Dryer, Model HHD0001-02.

2. Safety Information

  • Ensure the power supply matches the specifications listed on the product label (110-120V, 60Hz, 1800W).
  • Installation must be performed by a qualified electrician in accordance with local electrical codes.
  • Do not operate the hand dryer with wet hands or while standing in water.
  • Keep hands and foreign objects away from the air outlet during operation.
  • Disconnect power before cleaning or servicing the unit.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Product Features and Components

The Goetland HHD0001-02 hand dryer offers robust performance and user-friendly features:

  • Fast Drying: Dries hands within 8-10 seconds with a powerful 1800W motor.
  • Automatic Operation: Touchless infrared sensor for hygienic use.
  • Durable Construction: Made from 304 Stainless Steel for longevity.
  • Energy Efficient: Reduces energy consumption compared to older models and eliminates paper towel waste.
  • Safety Certifications: CE certified, Waterproof Grade IPX1.
  • Adjustable Sensing Distance: Default 4.7 inches (12 cm), adjustable from 2-5.9 inches (5-15 cm).
  • Low Noise Operation: Operates at 70-72 dB.
  • Overheat Protection: Features dual overheat protection and a 60-second timeout.
Goetland hand dryer with icons for Elegant Design, 304 Stainless Steel, Fast Drying, and Touchless operation.

Figure 2: Key features of the Goetland Hand Dryer.

Internal view of the Goetland hand dryer showing the 25000 RPM motor and electronic components.

Figure 3: Internal components and 25000 RPM motor.

Diagram highlighting various features like 1800W power, 8-10s drying, 60s timeout, dual overheat protection, 25000 RPM motor, externally visible blue light, fireproof key plastic parts, and 2-year free replacement warranty.

Figure 4: Detailed product features and warranty information.

4. Specifications

SpecificationValue
BrandGoetland
Model NumberHHD0001-02
Material TypeStainless Steel
Power1800W
Voltage110-120V
Frequency60Hz
Waterproof GradeIPX1
Noise Level70-72 dB
Drying Time8-10 seconds
Sensing Distance (Default)4.7 inches (12 cm)
Sensing Distance (Adjustable)2-5.9 inches (5-15 cm)
Item Dimensions (D x W x H)6.5"D x 11.6"W x 6.5"H (16.6cm D x 29.5cm W x 31.7cm H)
Item Weight9 Pounds
CertificationsCE
Goetland hand dryer with dimensions labeled: 6.51 inches / 16.6 cm height, 11.6 inches / 29.5 cm width, 12.5 inches / 31.7 cm depth. Also shows the power cord and automatic infrared sensor.

Figure 5: Product dimensions and features.

Close-up of the product label on the Goetland hand dryer showing Model HHD0001-02, Voltage 110-120V, Power 1800W, IP23, and CE mark.

Figure 6: Product label with electrical specifications.

5. Setup and Installation

The Goetland hand dryer can be installed by plugging it directly into an outlet or by hardwiring it. Ensure the mounting surface is sturdy and capable of supporting the unit's weight.

5.1. Recommended Mounting Heights

User GroupHeight from Floor to Bottom of Dryer
Men45 inches (114 cm)
Women43 inches (109 cm)
Teenagers41 inches (104 cm)
Small Children35 inches (89 cm)
Accessible37 inches (94 cm)
Diagram showing suggested mounting heights for the hand dryer from the floor for different user groups: Men, Women, Teenagers, Small Children, and Accessible users.

Figure 7: Suggested mounting heights.

5.2. Installation Steps

  1. Shell Removal: Remove the two countersunk screws from the body shell using the provided hex key.
  2. Machine Installation: Use the installation template to mark drill points. Drill holes and secure the machine's backplate to the wall using the four sets of screws and anchors.
  3. Wiring: Connect the power cord. For direct wiring, consult a qualified electrician to connect to the terminal block inside the unit (Live, Neutral, Ground).
  4. Shell Installation: Reattach the outer shell and tighten the two countersunk screws.
Three-step diagram showing how to install the hand dryer: 1. Remove shell by unscrewing two countersunk screws. 2. Mount the machine using four screws and anchors. 3. Install the shell by tightening two countersunk screws.

Figure 8: Easy installation steps.

Contents of the installation kit including an installation template, instruction manual, and an accessories pack with screws and a hex key.

Figure 9: Installation template, manual, and accessories pack.

Video demonstrating the installation procedure of the Goetland hand dryer, showing how to mount the backplate and secure the unit to the wall.

Video 1: Installation Procedure for Goetland Hand Dryer.

6. Operating Instructions

The Goetland hand dryer operates automatically via an infrared sensor.

  1. Ensure the hand dryer is properly installed and connected to a power source.
  2. Place your hands under the air outlet. The infrared sensor will detect your hands and activate the dryer.
  3. Move your hands gently back and forth under the airflow for optimal drying.
  4. The dryer will automatically turn off once your hands are removed from the sensor's range.
Image showing hands being dried by the Goetland hand dryer, with text 'ENERGY EFFICIENT SAVE MONEY' and a crossed-out stack of paper towels, emphasizing its eco-friendly and cost-saving benefits.

Figure 10: Hand dryer in operation, highlighting energy efficiency.

7. Maintenance

Regular maintenance ensures optimal performance and hygiene.

  • Cleaning: Wipe the exterior surface with a soft, damp cloth and mild detergent. Do not use abrasive cleaners or solvents.
  • Air Inlet/Outlet: Periodically check and clean the air inlet and outlet grilles to prevent dust and lint buildup, which can affect performance.
  • Sensor: Keep the infrared sensor clean and unobstructed for reliable automatic operation.
  • Power Disconnection: Always disconnect the power supply before performing any cleaning or maintenance.

8. Troubleshooting

If you encounter issues with your hand dryer, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Dryer does not turn onNo power supply; Sensor obstructed or dirty; Internal fault.Check power connection and circuit breaker. Clean the sensor. If problem persists, contact support.
Weak airflowAir inlet/outlet blocked; Motor issue.Clean air inlet/outlet grilles. If problem persists, contact support.
Dryer runs continuouslySensor fault; Object continuously in sensor range.Ensure nothing is blocking the sensor. Disconnect power for 30 seconds and reconnect. If problem persists, contact support.
Overheating/Shuts off unexpectedlyOverheat protection activated; Insufficient ventilation.Allow unit to cool down. Ensure proper ventilation around the unit. Clean air inlets.

9. Warranty and Support

The Goetland Stainless Steel Commercial Hand Dryer, Model HHD0001-02, comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries, please contact Goetland customer service.

Manufacturer: Goetland

Seller: Goetland

For assistance, please refer to the contact information provided with your purchase or visit the official Goetland store page on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.