U`King DMX 192 Channel Controller Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your U`King DMX 192 Channel Controller. This controller is designed for managing various stage lighting effects, featuring 192 DMX channels and control over 12 scanners, each with 16 channels. Please read this manual thoroughly before use to ensure proper setup and operation.

U`King DMX 192 Channel Controller with a hand pointing to the DMX 512 label

Image: The U`King DMX 192 Channel Controller, a standard universal DMX 512 controller capable of managing up to 192 DMX channels.

2. Safety Information

Ensure the power supply voltage matches the requirements specified on the device.
Do not expose the controller to rain or moisture to prevent electric shock or fire.
Avoid operating the device in extremely high or low temperatures.
Do not open the casing; refer all servicing to qualified personnel.
Keep the device away from direct sunlight and heat sources.
Always disconnect power before cleaning or performing maintenance.

3. Product Overview

3.1 Key Features

192 DMX channels for comprehensive lighting control.
Control for 12 scanners, each with 16 DMX channels.
23 banks, each containing 8 programmable scenes.
6 programmable chases, each capable of storing up to 240 scenes.
Built-in microphone for sound-activated lighting effects.
DMX polarity selector for compatibility with various DMX devices.

Various types of DMX lighting fixtures including Par Light, Moving Head, COB Light, Stage Effect Light, Wash Light, and Black Light.

Image: Examples of DMX lighting fixtures compatible with the U`King DMX 192 Channel Controller, such as Par Lights, Moving Heads, and Wash Lights.

3.2 Components and Controls

Labeled front panel of the U`King DMX 192 Channel Controller

Image: Front panel of the DMX controller with key areas labeled for easy identification.

Scanner Buttons (1-12): Used to select individual or groups of DMX fixtures (scanners).
Scene Buttons (1-8): Used to select or program specific lighting scenes.
Channel Selection Sliders (1-8): Adjust DMX values for individual channels.
Page Selection Buttons (Page A/B): Switches between two pages of channel sliders, providing access to 16 channels per scanner.
Speed/Fade Selection Sliders: Adjust the speed of chases and the fade time between scenes.
Function Selection Area: Includes buttons for Program, Auto/Del, Music, MIDI/Add, Blackout, and Chase selection.
Light Selecting Area: Visual indicators for selected scanners.

Rear panel of the U`King DMX 192 Channel Controller showing ports

Image: Rear panel of the DMX controller, showing the Signal Switch, DMX Output, Power Port, and ON/OFF switch.

Signal Switch: Adjusts DMX signal polarity.
DMX Output: XLR connector for connecting to DMX lighting fixtures.
Power Port: Input for the DC 9-12V power adapter.
ON/OFF Switch: Main power switch for the unit.

4. Setup

Power Connection: Connect the provided power adapter to the Power Port on the rear of the controller and then to a suitable power outlet (100-240V, 50/60Hz).
DMX Connection: Connect your DMX lighting fixtures to the DMX Output (XLR) on the rear of the controller using a standard DMX cable. Ensure all fixtures are properly daisy-chained if applicable.
Power On: Flip the ON/OFF switch to the 'ON' position. The controller will power up.
DMX Polarity: If your DMX fixtures are not responding correctly, adjust the Signal Switch on the rear panel to match the DMX polarity requirements of your fixtures.
Fixture Addressing: Ensure all your DMX lighting fixtures are correctly addressed according to their respective manuals and the DMX channels you intend to control with this console.

5. Operating Instructions

5.1 Basic Control

Select Scanners: Press the desired Scanner Buttons (1-12) to select the lighting fixtures you wish to control. You can select multiple scanners simultaneously.
Adjust Channels: Use the Channel Selection Sliders (1-8) to adjust the DMX values for the selected scanners' attributes (e.g., pan, tilt, color, dimmer). If your fixture has more than 8 channels, use the Page Selection Buttons (Page A/B) to access channels 9-16.
Blackout: Press the Blackout button to instantly turn off all DMX output. Press it again to restore output.

5.2 Programming Scenes

The controller allows you to program and store up to 23 banks of 8 scenes each.

Press the Program button to enter programming mode. The Program LED will illuminate.
Select the desired Scanner Buttons (1-12) you want to include in the scene.
Adjust the Channel Selection Sliders to achieve the desired lighting effect for your scene.
Press the MIDI/Add button.
Select one of the Scene Buttons (1-8) where you want to save this scene. The Scene LED will flash briefly to confirm saving.
Repeat steps 2-5 for additional scenes.
Press the Program button again to exit programming mode.

5.3 Running Scenes and Chases

Running Scenes: In normal operating mode (not Program mode), press any of the Scene Buttons (1-8) to activate a stored scene.
Running Chases:
1. Select the desired Chase button (Chase 1-6).
2. Press the Auto/Del button to activate the chase.
3. Adjust the Speed and Fade Time sliders to control the pace and transition of the chase.
Sound Activation: Press the Music button to activate sound-triggered lighting effects via the built-in microphone. The lights will react to ambient sound. (Note: This controls lighting effects only, not music playback).

6. Maintenance

Cleaning: Use a soft, dry cloth to clean the exterior of the controller. Do not use abrasive cleaners or solvents.
Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Inspection: Periodically check all cables and connections for signs of wear or damage.

7. Troubleshooting

Problem	Possible Cause	Solution
Controller does not power on.	No power supply; faulty adapter; ON/OFF switch off.	Check power adapter connection; ensure ON/OFF switch is in 'ON' position; try a different power outlet.
DMX lights are not responding.	Incorrect DMX connection; wrong DMX polarity; incorrect fixture addressing; Blackout engaged.	Verify DMX cable connections; adjust Signal Switch for correct DMX polarity; check fixture DMX addresses; ensure Blackout button is disengaged.
Scenes/Chases are not saving or playing correctly.	Not in programming mode; incorrect saving procedure.	Ensure you are in Program mode when saving; follow programming steps carefully.
Sound activation not working.	Music button not pressed; insufficient ambient sound.	Press the Music button; ensure there is sufficient sound for the microphone to detect.

8. Specifications

U`King DMX 192 Channel Controller with specifications listed

Image: The DMX controller displaying its key technical specifications.

Channels: 192 DMX Channels
Scanners: 12 scanners, 16 channels each
Scenes: 23 Banks of 8 programmable scenes
Chases: 6 Programmable chases of 240 scenes
Sound Control: Built-in microphone for music triggering
Power Input: 100-240V, 50/60Hz Power Input DC 9-12V
Dimensions (L x W x H): 48.7 x 13.5 x 7 cm (19.1 x 5.31 x 2.76 inches)
Weight: 1.72 Kilograms (3.79 lbs)
Color: Black
Connectivity: XLR

9. Warranty and Support

For any questions, concerns, or support needs regarding your U`King DMX 192 Channel Controller, please contact our customer service. If you are not satisfied with our products, please do not hesitate to send us an email, and we will respond within 24 hours.

Please note: Specific warranty details may vary by region and retailer. Retain your proof of purchase for warranty claims.