Scheppach LBH2600P Thermal Leaf Blower Vacuum User Manual

Introduction

The Scheppach LBH2600P is a versatile 4-in-1 thermal leaf blower vacuum designed to keep your garden immaculate year-round. This powerful machine functions as a blower, vacuum, shredder, and collector, making it ideal for clearing grass clippings, hedge trimmings, and leaves. Its robust 25.4cm³ 2-stroke engine, easy start system, and high air speed ensure efficient performance for various outdoor tasks.

Safety Instructions

Always prioritize safety when operating the leaf blower vacuum. Read and understand all instructions before use.

• Wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and sturdy footwear.
• Do not operate the machine in wet conditions or near flammable liquids/gases.
• Keep children, pets, and bystanders at a safe distance from the operating area.
• Ensure all guards and safety devices are in place and functioning correctly before starting.
• Turn off the engine and disconnect the spark plug before performing any maintenance or clearing blockages.
• Handle fuel with care in a well-ventilated area.

Package Contents

Verify that all components are present upon unpacking:

• Scheppach LBH2600P Main Unit (Engine and Handle Assembly)
• Blower Tube Assembly
• Vacuum Tube Assembly
• Collection Bag (50L capacity)
• User Manual
• Tool Kit (if included)

Image: All components of the Scheppach LBH2600P leaf blower vacuum laid out, including the main engine unit, various tubes for blowing and vacuuming, and the large black collection bag with the Scheppach logo.

Setup and Assembly

Follow these steps to assemble your Scheppach LBH2600P:

1. Assembling for Blower Mode

1. Attach the blower tube to the air outlet of the main unit. Ensure it clicks securely into place.
2. Verify all connections are tight before use.

Image: The Scheppach LBH2600P configured for blowing, showing the long black blower tube attached to the main red and black engine unit.

2. Assembling for Vacuum/Shredder Mode

1. Remove the blower tube if attached.
2. Attach the vacuum tube to the intake opening of the main unit.
3. Connect the collection bag to the air outlet. Ensure the bag is securely fastened to prevent debris leakage.
4. Confirm all connections are firm.

Image: The Scheppach LBH2600P configured for vacuuming, with the vacuum tube attached to the front and the large black collection bag connected to the side outlet.

Operating Instructions

Fueling the Machine

The LBH2600P uses a 2-stroke engine. Always use a proper fuel mixture of gasoline and 2-stroke oil as specified in the engine manual. Do not use pure gasoline.

• Mix fuel in a separate, approved container.
• Fill the fuel tank in a well-ventilated area, away from ignition sources.
• Do not overfill.

Starting the Engine (Easy Start)

1. Place the machine on a flat, stable surface.
2. Set the choke lever to the "START" position.
3. Press the primer bulb several times until fuel is visible.
4. Pull the starter cord firmly until the engine fires (usually 1-3 pulls).
5. Once the engine starts, gradually move the choke lever to the "RUN" position.
6. Allow the engine to warm up for a few moments before operating at full throttle.

Using the Blower Function

Direct the blower tube towards the debris you wish to move. Use a sweeping motion to gather leaves and other light garden waste into piles.

Image: A person operating the Scheppach LBH2600P in blower mode, clearing a pile of autumn leaves on a lawn.

Using the Vacuum and Shredder Function

Once debris is piled, switch to vacuum mode. Guide the vacuum tube over the piles. The machine will vacuum the debris and shred it before collecting it in the 50L bag. The shredding ratio is approximately 10:1, significantly reducing volume.

• Avoid vacuuming large sticks, stones, or wet, heavy debris to prevent damage to the impeller.
• Empty the collection bag regularly to maintain optimal performance and prevent blockages.

Stopping the Engine

To stop the engine, move the ON/OFF switch to the "OFF" position.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your LBH2600P.

• Air Filter: Clean the air filter regularly, especially after dusty operations. Replace if damaged.
• Spark Plug: Inspect and clean the spark plug periodically. Replace if worn or fouled.
• Fuel Filter: Check and clean the fuel filter as needed.
• Impeller/Shredder Blades: Regularly inspect the impeller and shredder blades for damage or debris buildup. Clear any blockages (ensure engine is off and spark plug disconnected).
• General Cleaning: Clean the exterior of the machine after each use. Remove any accumulated dirt or debris from vents and moving parts.
• Storage: When storing for extended periods, drain the fuel tank or use a fuel stabilizer. Store in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

• Model: LBH2600P
• Engine Type: 2-Stroke, Thermal
• Engine Displacement: 25.4 cm³
• Functions: Blower, Vacuum, Shredder, Collector
• Max Air Speed: 268 km/h
• Max Air Flow: 678 m³/h
• Shredding Ratio: 10:1
• Collection Bag Capacity: 50 Liters
• Weight: 5.6 kg
• Dimensions (L x W x H): 24 x 69 x 2.5 cm
• Material: Plastic

Warranty and Support

Scheppach products are manufactured to high quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Scheppach website. For technical support, spare parts, or service inquiries, please contact Scheppach customer service or an authorized service center.

Manufacturer: Scheppach

Country of Origin: China

Note: Information regarding spare parts availability is not directly provided in the product data. Please contact the manufacturer for details.