1. Important Safety Instructions
Please read all instructions carefully before using your Tefal Ultimate Pure Steam Iron. Keep this manual for future reference.
- Always plug the iron into a grounded outlet.
- Do not leave the iron unattended while it is connected to the mains or while it is still hot.
- Keep the iron and its cord out of reach of children.
- Never immerse the iron, cord, or plug in water or any other liquid.
- Unplug the iron before filling with water, cleaning, or after each use.
- Use the iron only for its intended purpose, which is ironing clothes.
- Do not operate the iron if it has been dropped, if there are visible signs of damage, or if it is leaking.
- Ensure the voltage indicated on the iron matches your local mains voltage.
2. Product Overview
The Tefal Ultimate Pure Steam Iron FV9845 is designed for powerful and efficient ironing, featuring a unique Micro-Calc Filter system to prevent limescale stains.
Image 2.1: Front view of the Tefal Ultimate Pure Steam Iron FV9845, showcasing its sleek design and water tank.
Key components include the water tank, steam trigger, temperature control dial, and the innovative Durilium AirGlide Autoclean soleplate.
Image 2.2: Underside view of the iron, highlighting the Durilium AirGlide Autoclean soleplate for smooth gliding and even steam distribution.
3. Setup and First Use
3.1 Unpacking
Carefully remove the iron from its packaging. Remove any protective films or stickers from the soleplate and body of the iron.
3.2 Filling the Water Tank
- Ensure the iron is unplugged from the power outlet.
- Open the water tank filler cap.
- Fill the water tank with clean tap water up to the 'MAX' level indicator. Do not overfill.
- Close the filler cap securely.
Image 3.1: The iron resting on its heel, showing the water tank and the Micro-Calc Filter housing at the rear.
3.3 First Use
For the first use, or if the iron has not been used for a long time, iron an old piece of fabric to remove any manufacturing residues or impurities from the steam vents. This may involve some steam or water discharge initially.
4. Operating Instructions
4.1 Setting the Temperature
- Plug the iron into a suitable power outlet.
- Turn the temperature control dial to the desired setting based on the fabric type. Refer to the garment's care label.
- Wait for the indicator light to turn off, indicating the iron has reached the set temperature.
4.2 Steam Ironing
- Ensure the water tank is filled.
- Set the temperature to a steam-compatible setting (usually indicated on the dial).
- Press the steam trigger for continuous steam output (up to 60 g/min).
- For stubborn creases, use the powerful 260 g/min steam boost by pressing the steam boost button.
Image 4.1: A user demonstrating the iron in use, showing steam being emitted during the ironing process.
4.3 Dry Ironing
For dry ironing, ensure the steam setting is off and the water tank is empty or the steam function is not activated. Set the temperature according to the fabric type.
5. Maintenance and Cleaning
5.1 Cleaning the Soleplate
Allow the iron to cool completely. Wipe the soleplate with a damp cloth. Do not use abrasive cleaners or metallic scouring pads.
5.2 Micro-Calc Filter Cleaning
The Micro-Calc Filter system is designed to capture limescale. Regular cleaning of this filter is essential for optimal performance and to prevent calc stains.
- Ensure the iron is unplugged and completely cool.
- Locate the Micro-Calc Filter at the rear of the iron.
- Unlock and remove the filter cartridge.
- Rinse the filter under running water to remove any accumulated limescale.
- Reinsert the clean filter cartridge and lock it into place.
Image 5.1: The Micro-Calc Filter being removed from the iron, showing captured limescale particles.
Image 5.2: A detailed view of the Micro-Calc Filter cartridge, highlighting its design for capturing limescale.
5.3 Storage
After use, unplug the iron and allow it to cool completely. Empty any remaining water from the tank. Store the iron upright in a safe, dry place.
6. Troubleshooting
If you encounter issues with your iron, please consult the table below before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Iron does not heat up. | Not plugged in; power outlet fault; iron not switched on. | Check plug connection; test outlet with another appliance; ensure temperature dial is set. |
| No steam or insufficient steam. | Water tank empty; temperature too low; steam vents blocked. | Fill water tank; set higher temperature; clean soleplate vents. |
| Water leaking from soleplate. | Temperature too low for steam; overfilled water tank; calc build-up. | Increase temperature; do not overfill; clean Micro-Calc Filter. |
| White flakes or stains on clothes. | Limescale build-up. | Clean the Micro-Calc Filter thoroughly. |
7. Specifications
- Brand: Tefal
- Model Name: FV9845
- Item Model Number: 3121040069271
- Power: 3200W (as per feature bullets)
- Continuous Steam Output: Up to 60 g/min
- Steam Boost: Up to 260 g/min
- Soleplate Technology: Durilium AirGlide Autoclean
- Special Feature: Micro-Calc Filter System
- Color: Pink/Black
- Product Dimensions: 1.1 x 9.7 x 6.5 inches
- Item Weight: 4.65 pounds
- Voltage: 230 Volts (approx.)
- Frequency: 50 Hz
8. Warranty and Support
Your Tefal Ultimate Pure Steam Iron is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Tefal website.
For technical support, spare parts, or service inquiries, please contact Tefal customer service in your region. Contact details can typically be found on the official Tefal website or on your product packaging.
You can visit the official T-Fal Store for more information: T-Fal Store on Amazon
