1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your NVIDIA GEFORCE RTX 2080 Ti Founders Edition graphics card. Please read this guide thoroughly before proceeding with installation to ensure proper setup and optimal performance.
2. Product Overview
The NVIDIA GEFORCE RTX 2080 Ti Founders Edition is a high-performance graphics card designed for demanding gaming and professional applications. It features advanced NVIDIA Turing architecture, real-time ray tracing, and AI-enhanced graphics.

Figure 2.1: Front view of the NVIDIA GEFORCE RTX 2080 Ti Founders Edition graphics card, showcasing its dual-fan cooling system and sleek design.
3. Package Contents
Verify that all items listed below are present in your product packaging:
- NVIDIA GeForce RTX 2080 Ti Graphics Card
- DisplayPort to DVI Dongle
- Quick Start Guide

Figure 3.1: The retail packaging for the NVIDIA GEFORCE RTX 2080 Ti Founders Edition, indicating the product inside.
4. System Requirements
Before installing the graphics card, ensure your system meets the following minimum requirements:
- PCI Express-compliant motherboard with one dual-width x16 graphics slot
- Two 8-pin power connectors
- Minimum 650 W or greater system power supply
- 1.5 GB of available hard-disk space
- 8 GB system memory (16 GB recommended)
- Operating System: Linux, Microsoft Windows 7, Windows 10 (Anniversary update or higher)
- Internet connection for driver installation and updates

Figure 4.1: The back of the product box, detailing minimum system requirements and support information.
5. Installation
Follow these steps to install your NVIDIA GEFORCE RTX 2080 Ti Founders Edition graphics card:
- Preparation: Power off your computer and disconnect all cables. Open your computer case.
- Remove Old Graphics Card (if applicable): If you have an existing graphics card, carefully remove it by unscrewing its retention bracket and releasing the PCIe slot latch.
- Insert New Graphics Card: Align the NVIDIA GEFORCE RTX 2080 Ti with an available PCI Express x16 slot on your motherboard. Press down firmly until the card is securely seated and the PCIe slot latch engages.
- Secure the Card: Use screws to fasten the graphics card's retention bracket to your computer case.
- Connect Power: Connect two 8-pin PCIe power cables from your power supply to the corresponding power connectors on the graphics card.
- Close Case and Connect Peripherals: Close your computer case, reconnect all cables (monitor, power, etc.), and power on your computer.
- Install Drivers: Once your operating system loads, download and install the latest drivers from the official NVIDIA website (www.geforce.com/drivers).

Figure 5.1: Side view of the graphics card, highlighting the two 8-pin power connectors required for operation.

Figure 5.2: Rear view of the graphics card, showing the various display output ports including DisplayPort and HDMI.
6. Operation
After successful installation and driver setup, your NVIDIA GEFORCE RTX 2080 Ti Founders Edition is ready for use. Ensure your display is connected to one of the card's output ports. For optimal performance, regularly update your graphics drivers through the NVIDIA GeForce Experience software or the NVIDIA website.
Monitor your card's performance and temperature using third-party utilities if desired. Adjusting in-game graphics settings will impact performance and visual quality.
7. Maintenance
Proper maintenance can extend the lifespan and maintain the performance of your graphics card:
- Dust Removal: Periodically clean dust from the fans and heatsink using compressed air. Ensure the computer is powered off and unplugged before cleaning.
- Airflow: Ensure adequate airflow within your computer case to prevent overheating. Keep the area around your computer clear of obstructions.
- Driver Updates: Keep your graphics drivers updated to benefit from performance improvements and bug fixes.
8. Troubleshooting
If you encounter issues with your graphics card, consider the following troubleshooting steps:
- No Display Output:
- Ensure the monitor cable is securely connected to both the graphics card and the monitor.
- Verify that the graphics card is fully seated in the PCIe slot and that all power cables are connected.
- Test with a different display cable or monitor if possible.
- Driver Issues:
- If you experience crashes or poor performance, try reinstalling the latest drivers from the NVIDIA website.
- Use Display Driver Uninstaller (DDU) in Safe Mode to completely remove old drivers before installing new ones.
- Overheating:
- Check fan operation on the graphics card.
- Ensure your computer case has sufficient airflow and is free of dust.
- Monitor temperatures using software utilities.
- System Instability:
- Ensure your power supply meets the minimum wattage requirement.
- Check for conflicts with other hardware components.
For further assistance, refer to the NVIDIA support resources mentioned in the Warranty and Support section.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | NVIDIA |
| Model Number | 900-1G150-2530-000 |
| Graphics Coprocessor | NVIDIA GeForce RTX 2080 Ti |
| Graphics RAM Size | 11 GB |
| Video Output Interface | DisplayPort |
| Product Dimensions | 10.5 x 1.75 x 4.55 inches |
| Item Weight | 4.51 pounds |
| Date First Available | October 3, 2018 |
10. Warranty and Support
Your NVIDIA GEFORCE RTX 2080 Ti Founders Edition graphics card comes with a three-year warranty from NVIDIA.
Support Resources:
- Warranty Information: For detailed warranty terms and conditions, visit www.nvidia.com/warranty.
- Product Support: For technical assistance, FAQs, and troubleshooting guides, visit www.nvidia.com/support.
- Driver Downloads: Obtain the latest drivers and software for your graphics card at www.geforce.com/drivers.
- Contact Support: NVIDIA offers phone, email, and live chat support. Refer to the NVIDIA support website for contact details specific to your region.





