1. Introduction
This manual provides comprehensive instructions for the ALLIMITY EN2A27, EN2A27HT, and EN2A27H replacement remote controls. This remote is designed to operate various Hisense 4K LED HD UHD Smart TV models without the need for programming or pairing.
Compatible Models:
This remote control is compatible with a wide range of Hisense Smart TV models, including but not limited to:
- EN2A27, EN2A127H, EN2A27HT, EN2AN27H, EN2AS27H, EN2D27, EN33924HS, EN33925A
- 32H5C, 40H5C, 43H5C, 43H6C, 43H7C, 50CU6000, 50H5C, 50H6B, 50H6C, 50H7C, 50H7GB, 50H7GB1, 50H8C
- 55H5C, 55H6B, 55H7B, 55H7C, 55H8C, 55H9B2, 65CU6200, 65H6C, 65H7B2, 65H7C, 65H8C, 65H10B, 65H10B2
- LC173-60N7000U, LC173-65N5200U, LC-17365N7000U, LC173-65N9000U, LC173-75N8000U, LC-40N5000U, LC-43N7000U, LC-50N5000U, LC-50N7000U, LC55N620CU, LC-55N7000U, LC-60N6200U, LC-60N7000U, LC-65N7000U, LC-75N620CU, N6200U, RT167723
- LTDN55K2203GWUS, 40K368AW, 50H6SG, 55H65G, 55H6SG, 55H7G, ERF6B11, LC17340N5000U
Image 1.1: Front view of the ALLIMITY EN2A27 series remote control, showing all buttons including power, number pad, navigation, volume, channel, and dedicated app buttons for Netflix, Amazon, Vudu, and YouTube.
2. Setup
2.1 Battery Installation
The remote control requires two AAA batteries (not included). Follow these steps to install them:
- Locate the battery compartment on the back of the remote control.
- Press down on the latch and slide the battery cover downwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Image 2.1: Rear view of the remote control with the battery cover removed, illustrating the correct orientation for AAA battery insertion.
2.2 Initial Use
This remote control is pre-programmed and does not require any additional programming or pairing. Once batteries are installed, it is ready for immediate use with compatible Hisense Smart TVs.
3. Operating Instructions
Familiarize yourself with the primary functions of the remote control buttons:
| Button | Function |
|---|---|
| Power (●) | Turns the TV on or off. |
| Input | Selects the input source (HDMI, AV, etc.). |
| Number Pad (0-9) | Direct channel selection. |
| CC (Closed Caption) | Activates or deactivates closed captions. |
| Navigation Arrows (▲ ◀ ► ▼) | Navigates through menus and options. |
| OK | Confirms selections. |
| Back | Returns to the previous screen or menu. |
| Exit | Exits the current menu or application. |
| Home (⌂) | Accesses the TV's home screen or smart TV interface. |
| VOL (+/-) | Adjusts the volume level. |
| CH (+/-) | Changes TV channels. |
| Mute (🔇) | Mutes or unmutes the TV audio. |
| Netflix, Amazon, Vudu, YouTube | Direct access buttons for streaming applications. |
| Sleep | Sets a sleep timer for the TV. |
| Media Playback Controls (◀◀, ►►, ▮▮, ►) | Controls media playback (rewind, fast forward, pause, play). |
4. Maintenance
4.1 Cleaning
To clean the remote control, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these may damage the remote's surface or internal components.
4.2 Battery Replacement
Replace batteries when the remote's responsiveness decreases or it stops functioning. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
5. Troubleshooting
If you experience issues with your remote control, refer to the following common solutions:
- Remote Not Responding:
- Ensure the batteries are inserted correctly with the correct polarity.
- Replace the batteries with fresh AAA batteries.
- Check for any obstructions between the remote control and the TV's infrared sensor.
- Point the remote directly at the TV's sensor.
- Limited Range:
- Weak batteries can reduce the remote's effective range. Replace them if necessary.
- Ensure there are no strong light sources (e.g., direct sunlight, fluorescent lights) interfering with the infrared signal.
- Specific Buttons Not Working:
- This remote is designed for Hisense Smart TVs. Ensure your TV model is listed as compatible.
- Some advanced functions or specific smart TV features might require the original remote or a universal remote with learning capabilities.
If problems persist after trying these steps, please refer to the support section.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | ALLIMITY |
| Model Numbers | EN2A27, EN2A27HT, EN2A27H |
| Connectivity Technology | Infrared (IR) |
| Compatible Devices | Hisense Televisions |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 2 x 0.6 x 7 inches (approximately) |
| Item Weight | 1 ounce (approximately, without batteries) |
| Special Features | Ergonomic design, No programming required, Universal compatibility with specified Hisense models |
7. Warranty Information
Specific warranty details for ALLIMITY products may vary. Please refer to the product packaging or the manufacturer's official website for the most accurate and up-to-date warranty information. Keep your purchase receipt as proof of purchase for any warranty claims.
8. Customer Support
For further assistance, technical support, or inquiries regarding your ALLIMITY remote control, please contact the manufacturer or your retailer. Contact information can typically be found on the product packaging or the official ALLIMITY website.
You may also visit the product page on Amazon for additional resources or to contact the seller directly: ALLIMITY EN2A27 Remote Control on Amazon
