Introduction
The Meliconi HP600 Pro Wireless TV Headphones provide a high-quality audio experience for your television and other audiovisual devices. This wireless system allows you to listen to audio without the clutter of cables, offering complete freedom of movement within a range of up to 100 meters in open areas. The signal is designed to penetrate walls and ceilings, ensuring consistent audio throughout your home.
These headphones deliver interference-free stereo audio reproduction under optimal conditions and offer quick connection to various audio sources including televisions, decoders, DVD players, and Blu-ray players, thanks to their versatile digital optical, digital coaxial, and analog input options.
The compact docking and charging station serves as an ideal storage solution for the headphones after use. A built-in lithium-polymer battery provides approximately 8 hours of continuous use at medium volume. Designed for comfort, the headphones feature excellent acoustic isolation from ambient noise, an adjustable headband for ideal positioning, and lightweight, ergonomic oval-shaped ear cushions that adapt perfectly to the ear's morphology for prolonged listening sessions.
Package Contents
Please verify that all items are present in the package:
- Meliconi HP600 Pro Wireless Headphones
- Charging/Transmitter Docking Station
- AUX Cable (3.5mm)
- Toslink Optical Cable
- Power Adapter
- Instruction Manual (this document)
Image: Meliconi HP600 Pro product packaging, illustrating the headphones, charging dock, and included cables.
Setup Instructions
- Connect the Power Adapter:
Plug the supplied power adapter into the "PWR" port on the back of the charging/transmitter docking station. Connect the other end of the adapter to a wall outlet.
Image: Rear view of the charging dock, highlighting the power input and various audio input ports.
- Connect to Audio Source (TV/Audiovisual Equipment):
Choose one of the following connection methods based on your audio source's available outputs:
- Digital Optical (OPT-IN): Use the Toslink cable to connect your TV's optical audio output to the "OPT-IN" port on the docking station. This is the recommended connection for optimal digital audio quality.
- Digital Coaxial (COAX-IN): Use a coaxial digital cable (not included) to connect your TV's coaxial audio output to the "COAX-IN" port on the docking station.
- Analog (AUX): Use the 3.5mm AUX cable to connect your TV's headphone jack or analog audio output to the "AUX" port on the docking station.
Note: Ensure your TV's audio output settings are configured correctly for the chosen connection type (e.g., PCM for optical output).
- Charge the Headphones:
Place the headphones onto the charging pins of the docking station. The charging indicator light on the headphones or dock will illuminate to confirm charging. Allow approximately 8 hours for a full charge before first use.
Image: Meliconi HP600 Pro headphones correctly placed on the charging dock.
Operating Instructions
- Powering On/Off:
Press and hold the power button located on the right earcup to turn the headphones on or off. An indicator light will confirm the power status.
Image: Detail of the right earcup, showing the control buttons.
- Adjusting Volume:
Use the volume control buttons (+/-) located on the right earcup to adjust the listening volume to your preference.
- Selecting Audio Channel (if applicable):
The docking station may have multiple channels (CH1, CH2, CH3) for different audio inputs. Ensure the headphones are set to the correct channel corresponding to the input you are using on the dock.
- Wearing the Headphones:
Adjust the headband for a comfortable and secure fit. The oval-shaped ear cushions are designed to fit over your ears for optimal sound isolation and comfort during extended use.
Image: Detail of the comfortable ear cushions.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headphones and docking station. Do not use abrasive cleaners or solvents.
- Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Recharge them regularly, especially if not used for extended periods.
- Storage: When not in use, store the headphones on the charging dock in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Exposure: These headphones are not waterproof. Avoid exposure to water or excessive moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from headphones. |
|
|
| Sound is distorted or has static. |
|
|
| Headphones not charging. |
|
|
Specifications
| Model Name: | HP600 PRO |
| Brand: | Meliconi |
| Connectivity Technology: | RF 864 MHz, Wireless |
| Wireless Communication Technology: | Radio-frequency |
| Compatible Devices: | Television, other audiovisual equipment |
| Audio Inputs: | Toslink (Optical), 3.5 mm jack (AUX), Digital Coaxial |
| Wireless Range: | Up to 100 meters (open field) |
| Frequency Range: | 20 Hz - 20,000 Hz |
| Impedance: | 32 ohms |
| Sensitivity: | 80 dB |
| Battery Type: | Lithium-polymer (rechargeable) |
| Continuous Use Time: | Approx. 8 hours (at medium volume) |
| Charging Time: | Approx. 8 hours |
| Special Features: | Volume Control, Noise Isolation, Lightweight, Foldable |
| Ear Placement: | Over-Ear |
| Form Factor: | Over-Ear |
| Material: | Faux Leather |
| Color: | Black |
| Water Resistance Level: | Not waterproof |
| Country of Origin: | China |
Warranty and Support
Meliconi products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Meliconi website. For technical support, troubleshooting assistance, or spare parts inquiries, please contact Meliconi customer service through their official channels.
You can find more information and contact details on the official Meliconi website: www.meliconi.com
