Feit Electric OM100/950CA10K2

Feit Electric Enhance A21 E26 LED Bulb Daylight 100W Equivalent Instruction Manual

Model: OM100/950CA10K2

Introduction

This manual provides essential information for the safe and effective use of your Feit Electric Enhance A21 E26 LED Bulb. This LED bulb is designed to provide a daylight white light, equivalent to a 100-watt incandescent bulb while consuming significantly less energy. It features a standard E26 medium base and is dimmable.

Safety Information

Please read and understand all safety instructions before installation and use. Failure to do so may result in electric shock, fire, or other hazards.

  • Risk of Electric Shock: Always turn off the power to the fixture before inspecting, installing, or removing the bulb.
  • Risk of Fire: Do not exceed the maximum wattage rating of your fixture. This bulb is a 100W incandescent equivalent, but uses only 16.5W.
  • Do not use with emergency exit fixtures or emergency lights.
  • Suitable for damp locations.
  • Not for use in totally enclosed luminaires unless specified by the fixture manufacturer.
  • This device is not intended for use with photocells, occupancy sensors, or timing devices unless specifically designed for LED bulbs.
  • Ensure the bulb is securely screwed into the socket.

Package Contents

Verify that your package contains the following items:

  • Two (2) Feit Electric Enhance A21 E26 LED Bulbs
Feit Electric Enhance A21 LED Bulb 2-pack packaging

Image: Packaging for the Feit Electric Enhance A21 LED Bulb 2-pack, showing two bulbs and key specifications.

Setup and Installation

Follow these steps to install your Feit Electric LED bulb:

  1. Turn off Power: Before replacing any light bulb, ensure the power to the light fixture is turned off at the switch and the circuit breaker.
  2. Remove Old Bulb: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it has been recently in use.
  3. Install New Bulb: Screw the Feit Electric Enhance A21 LED bulb into the standard E26 medium base socket. Turn clockwise until snug, but do not overtighten.
  4. Restore Power: Turn the power back on at the circuit breaker and the light switch.
Feit Electric Enhance A21 LED Bulb

Image: A single Feit Electric Enhance A21 LED bulb, showcasing its shape and E26 medium base.

Operating Instructions

The Feit Electric Enhance A21 LED bulb operates like a standard light bulb.

  • Turning On/Off: Use the wall switch connected to the fixture to turn the bulb on or off.
  • Dimming Functionality: This bulb is dimmable. For optimal performance, use with compatible LED dimmers. Refer to your dimmer's instructions for proper operation.
Feit Electric Enhance A21 LED Bulb illuminating a room with flowers

Image: A Feit Electric Enhance A21 LED bulb providing daylight illumination in a room, highlighting its light quality.

Maintenance

LED bulbs require minimal maintenance. Follow these guidelines for care:

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
  • Replacement: LED bulbs have a long lifespan. Replace the bulb only when it ceases to function.

Troubleshooting

If your Feit Electric LED bulb is not functioning as expected, refer to the following common issues and solutions:

ProblemPossible CauseSolution
Bulb does not light up.
  • Power is off.
  • Bulb not screwed in properly.
  • Fixture or switch malfunction.
  • Bulb has reached end of life.
  • Ensure power is on at the switch and circuit breaker.
  • Turn off power, then re-screw the bulb firmly into the socket.
  • Test the fixture with a known working bulb. Consult an electrician if necessary.
  • Replace the bulb.
Bulb flickers or dims unexpectedly.
  • Incompatible dimmer switch.
  • Loose connection.
  • Ensure your dimmer is compatible with LED bulbs.
  • Turn off power, then re-screw the bulb firmly into the socket.

Specifications

Detailed specifications for the Feit Electric Enhance A21 E26 LED Bulb:

FeatureDetail
BrandFeit Electric
Model NumberOM100/950CA10K2
Bulb Shape SizeA21
Bulb BaseE26 (Medium)
Light TypeLED
Wattage16.5 Watts
Incandescent Equivalent100 Watts
Brightness1600 Lumens
Light ColorDaylight White
Color Temperature5000 Kelvin
Color Rendering Index (CRI)90
Special FeatureDimmable
Voltage120 Volts
Estimated Yearly Energy Cost$2.13 (Based on 3 hrs/day, 11c/kWh)
Life10.0 years (Based on 3 hrs/day)
Indoor/Outdoor UsageIndoor, Outdoor (Suitable for damp locations)
MaterialPlastic
Product Dimensions4.75 x 5 x 15.31 inches
Item Weight2.7 pounds
UPC017801154955
Lighting Facts label for Feit Electric A21 LED Bulb

Image: Lighting Facts label detailing brightness, energy cost, life, and light appearance for the Feit Electric A21 LED Bulb.

Feit Electric 100W Replacement A21 Daylight LED Features and Specifications

Image: A detailed chart outlining features and specifications for the Feit Electric 100W Replacement A21 Daylight LED bulb, including item number, dimensions, lumens, life hours, and dimmability.

Warranty and Support

This Feit Electric product comes with a warranty. For detailed warranty information or technical support, please refer to the official Feit Electric website or contact their customer service.

Manufacturer: Feit Electric

Warranty Description: Warranty information is available from the manufacturer.

For further assistance, visit the Feit Electric Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.