1. Product Overview
The Akozon pressure sensor is a high-quality, stainless steel transducer designed for accurate pressure measurement across various media. It features a standard 1/8 inch NPT thread, making it suitable for a wide range of applications including oil, fuel, gas, water, and air pressure systems. This sensor provides a reliable and precise output for monitoring system pressures.
Figure 1: Akozon 1/8 inch NPT Pressure Sensor. This image shows the overall design of the pressure sensor, highlighting its stainless steel body and electrical connector.
2. Key Features
- High Accuracy: Provides a small output error of ±2% FS, including non-linearity, hysteresis, and repeatability across the full temperature range.
- Durable Construction: Manufactured from high-quality stainless steel, ensuring rust-free performance, corrosion resistance, and maximum durability.
- Wide Application Range: Suitable for measuring pressure in oil, fuel, gas, water, and air systems, compatible with various tanks and lines.
- Easy Installation: Features a 1/8 inch NPT thread for simple and direct replacement or installation without the need for complex tools.
3. Specifications
| Specification | Value |
|---|---|
| Brand | Akozon |
| Model Number | 792117337086 |
| Thread Type | 1/8 inch NPT |
| Material | Stainless Steel |
| Maximum Supply Voltage | 5 Volts (DC) |
| Measurement Accuracy | ≤ 2% |
| Upper Rated Temperature | 120 Degrees Celsius |
| Output Type | Digital |
| Mounting Type | Replaced |
| Country of Origin | China |
4. Setup and Installation
This pressure sensor is designed for straightforward installation. Follow these steps for proper setup:
- Preparation: Ensure the system where the sensor will be installed is depressurized and cooled, if applicable.
- Thread Application: Apply appropriate thread sealant (e.g., PTFE tape or liquid sealant) to the 1/8 inch NPT threads of the sensor to ensure a leak-proof connection.
- Mounting: Carefully thread the sensor into the designated port. Tighten it securely, but avoid over-tightening, which can damage the threads or the sensor.
- Electrical Connection: Connect the sensor's electrical connector to your monitoring or control system. Refer to your system's wiring diagram for correct pin assignments. Ensure connections are secure and insulated.
- Verification: After installation, slowly repressurize the system and check for any leaks around the sensor's threads. Verify that the sensor is providing readings to your monitoring system.
Figure 2: Close-up of the sensor's 1/8 inch NPT thread and electrical connector. This image details the connection points for installation.
5. Operating Instructions
Once installed and connected, the Akozon pressure sensor operates by converting the applied pressure into a proportional electrical signal. This signal can then be read by a compatible gauge, display, or control unit.
- Power On: Ensure your monitoring system is powered on and correctly configured to receive input from the sensor.
- Pressure Monitoring: The sensor will continuously transmit pressure data. Monitor the readings on your connected device.
- Operating Range: Ensure the pressure being measured remains within the sensor's specified operating range (e.g., 300 PSI). Operating outside this range may lead to inaccurate readings or sensor damage.
- Temperature Considerations: The sensor is designed to operate within a specific temperature range (up to 120°C). Extreme temperatures can affect accuracy and lifespan.
6. Maintenance
To ensure optimal performance and longevity of your Akozon pressure sensor, follow these maintenance guidelines:
- Regular Inspection: Periodically inspect the sensor and its connections for any signs of physical damage, corrosion, or loose wiring.
- Cleaning: Keep the exterior of the sensor and its electrical connector clean. Use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Connection Integrity: Ensure all electrical connections remain tight and free from moisture or contaminants.
- Environmental Protection: Protect the sensor from direct exposure to extreme weather conditions, excessive vibration, or impacts that could compromise its integrity.
7. Troubleshooting
If you encounter issues with your Akozon pressure sensor, consider the following troubleshooting steps:
- No Reading or Incorrect Reading:
- Check all electrical connections for proper seating and continuity.
- Verify that the sensor is receiving the correct supply voltage (5V DC).
- Ensure the pressure being measured is within the sensor's specified operating range.
- Inspect the sensor for any visible damage or blockages in the pressure port.
- Leakage at Connection:
- Depressurize the system.
- Remove the sensor, reapply thread sealant, and reinstall, ensuring proper tightening.
- Intermittent Readings:
- Check for loose wiring or intermittent electrical contact.
- Ensure the sensor is not subjected to excessive vibration.
If these steps do not resolve the issue, please contact customer support for further assistance.
8. Warranty and Support
Akozon is committed to providing high-quality products and customer satisfaction. If you have any questions, concerns, or require technical assistance with your pressure sensor, please do not hesitate to contact our customer service team.
Our support team is available to help you with installation, operation, troubleshooting, and any other product-related inquiries. Please have your model number (792117337086) ready when contacting support to ensure efficient service.
For contact information, please refer to the Akozon official website or your purchase documentation.