1. Introduction
This manual provides essential information for the safe and efficient use of your Sauter Marapi Electric Towel Radiator. Please read these instructions carefully before installation and operation, and retain them for future reference. This appliance is designed to provide comfortable heating and towel drying in bathrooms and similar environments.
2. Safety Instructions
Always observe the following safety precautions to reduce the risk of fire, electric shock, or injury:
- Ensure the power supply voltage matches the rating label on the appliance.
- Do not operate the radiator with a damaged cord or plug.
- Keep the appliance away from water and do not immerse it in liquids.
- Do not cover the radiator, as this can cause overheating.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Installation must be carried out by a qualified electrician and in accordance with local wiring regulations.
3. Product Overview
The Sauter Marapi Electric Towel Radiator (Model 220050) is a 500-watt heating solution featuring a modern design with round tubes, a backlit digital screen for easy control, and advanced weekly programming capabilities. It is designed to efficiently heat your bathroom and dry towels.
Figure 1: Front view of the Sauter Marapi Electric Towel Radiator, showcasing its white finish and round heating tubes.
Figure 2: Angled view of the Sauter Marapi Electric Towel Radiator, highlighting its slim profile and integrated control panel on the right side.
4. Setup and Installation
Installation of the Sauter Marapi Electric Towel Radiator should only be performed by a qualified professional, adhering to all national and local electrical regulations. The appliance must be permanently connected to the electrical supply.
4.1 Mounting
- Choose a suitable wall location, ensuring sufficient clearance from water sources (e.g., shower, bath) as per local regulations (e.g., IP rating zones).
- Mark the drilling points on the wall using the provided mounting template.
- Drill holes and insert wall plugs suitable for your wall type.
- Secure the mounting brackets to the wall.
- Carefully hang the radiator onto the mounting brackets.
4.2 Electrical Connection
- Ensure the main power supply is switched off at the circuit breaker before making any electrical connections.
- Connect the radiator's electrical cable to a suitable fused spur or junction box, following the wiring diagram provided in the full installation guide (not included in this user manual).
- Verify all connections are secure and correctly insulated.
- Once installed, switch on the main power supply.
5. Operating Instructions
Your Sauter Marapi radiator features an intuitive control panel with a backlit screen for easy temperature and program management.
Figure 3: Close-up view of the Sauter Marapi Electric Towel Radiator's control panel with a backlit digital display and control buttons.
5.1 Powering On/Off
- To power on, press the ON/OFF button. The screen will illuminate.
- To power off, press the ON/OFF button again. The screen will turn off.
5.2 Setting the Temperature
- In manual mode, use the + and - buttons to adjust the desired temperature. The set temperature will be displayed on the screen.
- The radiator will automatically maintain the set temperature.
5.3 Mode Selection
The radiator typically offers several operating modes:
- Comfort Mode: Maintains a constant, user-defined comfort temperature.
- Eco Mode: Maintains a lower, energy-saving temperature.
- Frost Protection Mode: Maintains a minimum temperature (e.g., 7°C) to prevent freezing.
- Programming Mode: Follows a pre-set weekly schedule.
- Refer to the specific icons on your control panel and the full product manual for detailed mode selection instructions.
5.4 Weekly Programming
The weekly programming feature allows you to set different temperatures for various times of the day and days of the week.
- Access the programming menu (usually by pressing a dedicated PROG or MENU button).
- Use the + and - buttons to navigate through days and time slots.
- Select the desired mode (Comfort, Eco, or Off) for each time slot.
- Confirm your settings to save the program.
- Activate the programming mode for the radiator to follow your schedule.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your towel radiator.
6.1 Cleaning
- Always disconnect the radiator from the power supply before cleaning.
- Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Ensure no water enters the control panel or electrical components.
- Dry the radiator thoroughly after cleaning.
6.2 General Care
- Periodically check the mounting brackets to ensure they remain secure.
- Inspect the power cord for any signs of damage. If damaged, it must be replaced by a qualified technician.
7. Troubleshooting
If you encounter issues with your radiator, consult the following table before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Radiator does not heat | No power supply; Appliance is off; Temperature setting too low. | Check circuit breaker; Press ON/OFF button; Increase temperature setting. |
| Display is blank | No power supply; Appliance is off. | Check circuit breaker; Press ON/OFF button. |
| Radiator is too hot/cold | Incorrect temperature setting; Incorrect operating mode. | Adjust temperature; Select appropriate operating mode (e.g., Comfort). |
| Unusual noises | Expansion/contraction of materials (normal); Loose mounting. | If persistent or loud, check mounting screws; Contact a qualified technician if concerned. |
If the problem persists after attempting these solutions, please contact a qualified technician or the manufacturer's customer support.
8. Specifications
- Brand: Sauter
- Model: Marapi
- Reference Number: 220050
- Power Output: 500 Watts
- Weight: 9.3 kilograms (approx. 20.5 lbs)
- Features: Backlit screen, Weekly programming, Round tubes
- ASIN: B07HGPT4FS
- First Available Date: September 19, 2018
- Manufacturer: SAUTER
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Sauter provides customer support for product inquiries and technical assistance.
Please retain your proof of purchase for any warranty claims.
