EuroFone CL213812R

EuroFone Rechargeable Flameless LED Candles (CL213812R) Instruction Manual

Model: CL213812R | Brand: EuroFone

Introduction

Thank you for choosing EuroFone Rechargeable Flameless LED Candles. This manual provides essential information for the safe and effective use of your new LED candles. These candles offer a realistic flickering effect without the hazards of an open flame, making them ideal for various indoor decorative purposes.

The set includes 12 LED candles, 12 frosted plastic candle holders, a charging base, a USB charging cable, an adapter, and a 6-key remote control for convenient operation.

A set of 12 EuroFone rechargeable flameless LED candles with frosted cups, arranged decoratively.

Figure 1: EuroFone Rechargeable Flameless LED Candles in a decorative setting.

Safety Information

  • These flameless LED candles eliminate fire hazards, smoke, and matches, ensuring safety for children, pets, and your home.
  • Always use the original AC adapter and charging base provided with the product to prevent damage and ensure safe charging.
  • Do not expose the candles or charging base to water or excessive moisture. The product is not waterproof.
  • Keep the product away from extreme temperatures.
  • Do not attempt to open or modify the candles or charging base. Refer servicing to qualified personnel.
Image showing flameless LED candles next to a traditional candle, highlighting the safety of flameless options by eliminating fire hazards.

Figure 2: Flameless candles provide a safe alternative to traditional candles, eliminating fire risks.

Package Contents

Verify that all items are present in your package:

  • 12 x LED Candle Lights
  • 12 x Frosted Plastic Candle Cups
  • 1 x Charging Base
  • 1 x 6-Key Remote Control
  • 1 x USB Charging Cable
  • 1 x AC Adapter
  • 1 x User Manual (this document)

Setup

  1. Unpack all components from the box.
  2. Place the charging base on a stable, flat surface.
  3. Insert the LED candles into the charging ports on the base. Ensure the switch at the bottom of each candle is in the OFF position before charging.
  4. Connect the USB charging cable to the charging base and then to the AC adapter. Plug the AC adapter into a standard wall outlet.
  5. For initial use, remove the insulating sheet from the remote control's battery compartment.

Charging Instructions

To charge your EuroFone LED Candles:

  • Ensure each candle's bottom switch is in the OFF position before placing it on the charging base.
  • Connect the charging base to power using the provided USB cable and AC adapter.
  • A red indicator light on the charging base will illuminate, confirming that charging has begun. This light will remain red and does not change color when fully charged.
  • The initial charging time is approximately 6-8 hours. Subsequent charges typically take 4-6 hours.
  • A full charge provides approximately 8-12 hours of working time.
  • It is recommended not to use the candles while they are charging to prolong their lifespan.
  • When the candle light becomes dim or stops working, it requires recharging.

Operating Instructions

Candle Operation

  1. After charging, remove the candles from the charging base.
  2. Flip the switch at the bottom of each candle to the ON position. The candle will light up or be ready to be controlled by the remote.
  3. To turn off individual candles manually, flip the switch at the bottom to the OFF position.

Remote Control Operation

The 6-key remote control allows you to manage your candles from a distance of up to 25 feet (approximately 5 meters). Ensure the candle's bottom switch is in the ON position for remote functionality.

Image of the 6-key remote control with buttons labeled for power, brightness adjustment, and flicker modes.

Figure 3: Remote control layout and functions.

  • ON: Turns all active candles on.
  • OFF: Turns all active candles off.
  • +: Increases brightness.
  • -: Decreases brightness.
  • SL (Slow Flicker): Activates a slow flickering effect.
  • FL (Fast Flicker): Activates a fast flickering effect.

Note: If you use the remote to turn off the candles, they will still slowly drain power. For extended storage or to prevent battery drain, always switch the individual candles to the OFF position at the bottom.

Maintenance

  • Cleaning: Wipe the candles and charging base with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Storage: When not in use for extended periods, ensure candles are fully charged and then switched to the OFF position at the bottom. Store in a cool, dry place.
  • Battery Care: To maintain battery health, avoid completely depleting the battery frequently. Recharge when the light dims.

Troubleshooting

ProblemPossible CauseSolution
Candles do not light up.Battery is depleted.
Bottom switch is OFF.
Charge the candles.
Ensure the bottom switch is in the ON position.
Remote control is not working.Candle's bottom switch is OFF.
Remote battery is dead or insulating sheet not removed.
Out of range.
Ensure the bottom switch on each candle is ON.
Remove the insulating sheet from the remote. Replace remote battery if necessary.
Operate within 25 feet (5 meters) of the candles.
Candles are not charging.Candle's bottom switch is ON.
Charging cable or adapter is not connected properly.
Faulty adapter/cable.
Ensure the bottom switch on each candle is OFF during charging.
Check all connections.
Try a different compatible USB cable and adapter if available.
Short operating time after charging.Insufficient charging time.
Candles left ON via remote when not in use.
Battery degradation over time.
Ensure candles are charged for the recommended 4-6 hours (6-8 hours for first use).
Always switch candles to OFF at the bottom for extended storage.
Battery lifespan is finite; performance may decrease over time.

Specifications

Diagram showing the dimensions of the LED candles and the charging base in inches and centimeters.

Figure 4: Product dimensions for the LED candles and charging base.

  • Model Number: CL213812R
  • Candle Dimensions: 4.6cm (H) x 4cm (D) / 1.81" (H) x 1.57" (D)
  • Charging Base Dimensions: 28.3cm (L) x 9.7cm (W) x 2cm (H) / 11" (L) x 3.8" (W) x 0.8" (H)
  • Working Time: 8-12 hours (after full charge)
  • Charging Time: 4-6 hours (6-8 hours for first use)
  • LED Lifespan: Up to 80,000 hours
  • Adapter Input: 100-240V, 50/60Hz
  • Adapter Output: 5V, 500mA
  • Control Method: Remote Control, Push Button (on candle)
  • Light Source Type: LED
  • Light Color: Warm White, Yellow
  • Material: Plastic
  • Indoor/Outdoor Usage: Indoor
  • Special Feature: 2-way switching (manual and remote)

Product Overview Video

Video 1: An overview of the EuroFone rechargeable LED candles, demonstrating their appearance and use in various decorative settings.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or the official EuroFone website. Keep your purchase receipt for warranty claims.

Related Documents - CL213812R

Preview EuroFone S6-1200m Motorcycle Helmet Bluetooth Intercom User Manual
Comprehensive user manual for the EuroFone S6-1200m motorcycle helmet Bluetooth intercom headset, detailing features, specifications, installation, and operation for riders.
Preview Qualitel Eurofone 210 Digital Cordless Telephone User Manual
Comprehensive user manual for the Qualitel Eurofone 210 Digital Cordless Telephone (DECT), covering setup, features, safety instructions, troubleshooting, and warranty information.
Preview S3 Plus All-in-One Bluetooth Recorder User Manual
User manual for the S3 Plus All-in-One Bluetooth Recorder. Features include HD video, 2000m 6-person Bluetooth intercom, music, FM radio, mobile app, and IP65 waterproofing for motorcycle helmets.
Preview S3 Plus All-in-One Bluetooth Recorder & Intercom User Manual
Explore the features and instructions for the S3 Plus All-in-One Bluetooth Recorder. This manual covers installation, operation, and specifications for this motorcycle helmet communication and recording device.