1. Introduction
Welcome to the user manual for your Gillette 7 O'Clock Green Razor Blades. These blades are crafted for traditional shaving enthusiasts, offering exceptional performance, precision engineering, and long-lasting sharpness for a consistently smooth and comfortable shave. Each blade is individually wrapped in wax paper to ensure optimal hygiene and ease of use.
2. Safety Information
WARNING: Razor blades are extremely sharp. Handle with extreme care to prevent cuts and injuries.
- Always keep razor blades out of reach of children and pets.
- Do not wipe blades with fingers or cloth.
- Dispose of used blades safely in a blade bank or a designated container.
- Ensure your hands are dry when handling new blades.
- Inspect the blade for any imperfections before use. Do not use if damaged.
3. Setup: Loading the Blade
Gillette 7 O'Clock Green Razor Blades are designed for use with double-edge safety razors. Follow these general steps to load a new blade:
- Unscrew the head of your double-edge safety razor. This typically involves twisting the handle until the top plate separates from the base plate.
- Carefully unwrap one Gillette 7 O'Clock Green Razor Blade from its wax paper. Handle the blade only by its short edges to avoid touching the sharp cutting edges.
- Place the new blade onto the razor's base plate, aligning the holes in the blade with the posts on the plate.
- Carefully reassemble the razor head, ensuring the blade is securely clamped between the top and base plates. Tighten the handle until snug, but do not overtighten.
- Confirm the blade is evenly exposed on both sides of the razor head.
Image: A single Gillette 7 O'Clock Green Razor Blade, still in its individual wax paper wrapping, next to a small green and yellow box labeled "Gillette 7 O'CLOCK Super Stainless". This illustrates the individual packaging of the blade.
4. Operating: Shaving Instructions
For an optimal shaving experience with your Gillette 7 O'Clock Green Razor Blade:
- Prepare Your Skin: Wet your face with warm water and apply a quality shaving cream or soap to create a rich lather. This softens the hair and protects the skin.
- Hold the Razor Correctly: Hold the safety razor at approximately a 30-degree angle to your skin. The exact angle may vary slightly based on your razor and personal preference.
- Use Light Pressure: Let the weight of the razor do the work. Apply minimal pressure to avoid irritation and nicks.
- Shave with the Grain: For your first pass, shave in the direction of hair growth. This reduces irritation.
- Rinse Frequently: Rinse the razor head under running water after every few strokes to clear away lather and cut hairs.
- Subsequent Passes (Optional): For a closer shave, re-lather and perform a second pass across the grain or against the grain, depending on your skin's sensitivity and desired closeness. Use even lighter pressure for these passes.
- Rinse and Moisturize: After shaving, rinse your face with cool water to close pores. Apply an aftershave balm or moisturizer to soothe and hydrate your skin.
5. Maintenance
- Cleaning: After each shave, rinse the razor head thoroughly under running water to remove all soap and hair residue. Do not wipe the blade with your fingers or a towel.
- Drying: Gently shake off excess water and allow the razor and blade to air dry completely to prevent rust and maintain blade sharpness.
- Storage: Store your razor and blades in a dry place, away from humidity.
- Blade Replacement: Replace your Gillette 7 O'Clock Green Razor Blade after 3-7 shaves, or sooner if you notice any tugging or discomfort. Individual usage may vary.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Gillette |
| Model Number | G7CLKVBOX |
| Product Type | Double Edge Razor Blades |
| Blade Material | Stainless Steel (Green variant) |
| Packaging | Individually wax-paper wrapped |
| Number of Blades per Pack | Typically 5 or 100 (as per product listing) |
| Recommended Use | Shaving |
| Manufacturer | Procter & Gamble - Gillette |
Image: Front view of the Gillette 7 O'Clock Green Razor Blades packaging, featuring the brand logo and product name.
7. Troubleshooting
- Nicks or Cuts: Ensure you are using light pressure and the correct blade angle. Replace the blade if it feels dull.
- Skin Irritation/Razor Burn: Ensure proper skin preparation (warm water, good lather). Shave with the grain first. Consider a fresh blade.
- Dull Blade: Replace the blade. Gillette 7 O'Clock Green blades are known for their sharpness, but all blades dull with use.
- Blade Not Fitting: Ensure your razor is a standard double-edge safety razor. Check that the blade is correctly aligned on the posts.
8. Warranty and Support
For specific warranty information or product support, please refer to the official Gillette website or contact their customer service.
Gillette Official Website: www.gillette.com
Visit the Gillette Store on Amazon: Gillette Store
