1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Garosa G1/2 Brass Wall Mounted Faucet. Designed for washing machines, laundry areas, and utility sinks, this faucet features a durable brass construction and a classic design. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. Product Features
- Wall Mounted Design: Saves space and integrates seamlessly with various wall types.
- Solid Brass Construction: Made from oil-rubbed solid brass, ensuring corrosion resistance, anti-rust properties, and long-term durability.
- Vintage Aesthetic: Features a European classic antique design with an oil-rubbed bronze finish, enhancing the decor of your space.
- Single Cross Handle: Provides convenient control over cold/hot water flow and on/off function.
- Easy Connection: Tap spout is designed for direct connection with washing machine inlet pipes (G1/2 connection thread).
3. Safety Information
Always prioritize safety during installation and use. If you are unsure about any step, consult a qualified plumber. Ensure the main water supply is turned off before beginning any installation or maintenance work. Wear appropriate personal protective equipment, such as gloves and eye protection. Do not overtighten connections, as this can damage the faucet or plumbing.
4. Package Contents
Verify that all components are present before starting installation:
- Garosa G1/2 Brass Wall Mounted Faucet
- Decorative Cover/Escutcheon
- Raw Material Belt (PTFE tape)
- Instruction Manual
5. Installation Instructions
Follow these steps for proper installation of your Garosa wall-mounted faucet:
- Prepare Water Inlets: Ensure pre-buried water inlet pipes are left at the appropriate height on the wall.
- Apply PTFE Tape: Wrap raw material belt (PTFE tape) around the thread of the faucet.
- Attach Decorative Cover: Place the decorative cover onto the faucet.
- Screw into Inlet Pipe: Screw the faucet into the water inlet pipe. Tighten clockwise by hand first.
- Final Tightening: Use a screwdriver to insert into the water outlet for leverage and tighten the faucet. Do not use a wrench to tighten the threaded port to avoid damage.
- Check for Leaks: After tightening, turn on the water source to the pipeline to check for any leaks and ensure the thread is properly sealed.
Installation Video
Video: A demonstration of the Garosa Washing Machine Water Faucet in use, showing water flow and the cross handle operation.
6. Operating Instructions
The Garosa faucet features a single cross handle for easy operation:
- To Turn On: Rotate the cross handle counter-clockwise to open the water flow.
- To Turn Off: Rotate the cross handle clockwise to close the water flow.
- Water Temperature: This faucet is designed for a single water line (cold or hot, depending on connection). It does not mix hot and cold water.
7. Maintenance
To maintain the appearance and functionality of your brass faucet:
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the oil-rubbed bronze finish.
- Preventing Mineral Buildup: In areas with hard water, wipe the faucet dry after each use to prevent water spots and mineral buildup.
- Inspection: Periodically check all connections for tightness to prevent leaks.
8. Troubleshooting
If you encounter issues with your faucet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage at Connection | Loose connection, insufficient PTFE tape, damaged threads. | Turn off water supply. Re-apply PTFE tape generously and tighten the connection firmly by hand, then use a screwdriver for final tightening as per installation instructions. Do not overtighten with a wrench. |
| Low Water Flow | Partially closed water supply, debris in the line. | Ensure the main water supply valve is fully open. Check for any blockages in the water inlet pipe. |
| Handle is Stiff | Mineral buildup or internal component issue. | Regular cleaning can prevent buildup. If the issue persists, professional inspection may be required. |
9. Specifications
| Specification | Detail |
|---|---|
| Brand | Garosa |
| Model Name | Garosa2coitdnxv9-01 |
| Material | Brass |
| Finish Type | Oil Rubbed |
| Mounting Type | Wall Mount |
| Number of Handles | 1 (Cross Handle) |
| Hole Count | 1 |
| Special Feature | Rust-Resistant |
| Spout Reach | 12.5 Centimeters |
| Item Weight | 0.26 Kilograms (9.2 ounces) |
| Product Dimensions | 9.84 x 7.87 x 1.97 inches |
| GTIN / UPC | 798382920749 |
10. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Garosa customer service directly. Keep your purchase receipt as proof of purchase.