ALIENPRO ALPHA-8

ALIENPRO ALPHA-8 Portable Bluetooth Speaker User Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your ALIENPRO ALPHA-8 Portable Bluetooth Speaker. Please read this manual thoroughly before using the product and retain it for future reference. Proper use and maintenance will ensure optimal performance and longevity of your device.

2. Safety Instructions

  • Do not expose the speaker to water, moisture, or extreme temperatures.
  • Avoid placing the speaker near heat sources such as radiators, stoves, or other heat-producing appliances.
  • Use only the power adapter supplied or recommended by the manufacturer.
  • Do not attempt to open or repair the speaker yourself. Refer all servicing to qualified personnel.
  • Keep the speaker away from children and pets.
  • Ensure proper ventilation around the speaker during operation.
  • Disconnect the power cord during lightning storms or when unused for long periods.

3. Package Contents

Verify that all items are present in the package:

  • ALIENPRO ALPHA-8 Portable Bluetooth Speaker
  • Power Adapter/Charging Cable
  • User Manual (this document)
  • Wired Microphone (may vary by package)
  • Remote Control (may vary by package)

4. Product Overview

Familiarize yourself with the components of your ALIENPRO ALPHA-8 speaker.

Front view of ALIENPRO ALPHA-8 speaker with blue LED lights

Figure 4.1: Front view of the ALIENPRO ALPHA-8 speaker, showcasing the main 8-inch woofer with active blue LED illumination and two smaller tweeters at the top corners. A handle is visible at the top.

Side view of ALIENPRO ALPHA-8 speaker

Figure 4.2: Side view of the ALIENPRO ALPHA-8 speaker, illustrating its robust black casing and compact design. The side panel features molded indentations for structural integrity.

Rear control panel of ALIENPRO ALPHA-8 speaker

Figure 4.3: Rear control panel of the ALIENPRO ALPHA-8 speaker. This panel includes a digital display, various input ports (USB, SD card, AUX IN, Microphone), and control knobs for volume, echo, and microphone volume. Power switch and LED light switch are also present.

Front view of ALIENPRO ALPHA-8 speaker without LED lights

Figure 4.4: Front view of the ALIENPRO ALPHA-8 speaker with the LED lights turned off, showing the black protective grille over the 8-inch woofer and tweeters. The ALIENPRO logo is visible above the main grille.

5. Setup

5.1. Charging the Speaker

  1. Locate the DC 9V input port on the rear control panel (refer to Figure 4.3).
  2. Connect the supplied power adapter to the DC 9V input port.
  3. Plug the other end of the power adapter into a standard electrical outlet.
  4. The charging indicator light (if present) will illuminate, typically red, during charging. It will turn green or off when fully charged.
  5. For optimal battery life, fully charge the speaker before first use.

5.2. Power On/Off

  • To power on the speaker, locate the POWER switch on the rear control panel and slide it to the ON position. The display will light up.
  • To power off the speaker, slide the POWER switch to the OFF position.

6. Operating Instructions

6.1. Bluetooth Pairing

  1. Power on the speaker. The default mode is usually Bluetooth, indicated by "BLUE" on the display. If not, press the MODE button to switch to Bluetooth mode.
  2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Select "ALIENPRO ALPHA-8" or a similar name from the list of found devices.
  4. Once paired, the speaker will emit a confirmation sound, and the display will show a stable Bluetooth icon.
  5. You can now play audio from your device through the speaker.

6.2. USB/SD Card Playback

  1. Insert a USB flash drive or SD card (pre-loaded with MP3 audio files) into the respective USB or SD CARD slot on the rear control panel.
  2. The speaker will automatically detect the media and switch to USB or SD mode, beginning playback.
  3. Use the PLAY/PAUSE, PREV, and NEXT buttons to control playback.

6.3. AUX Input

  1. Connect one end of a 3.5mm audio cable (not included) to the AUX IN port on the speaker.
  2. Connect the other end of the cable to the headphone jack or audio output of your external audio device.
  3. Press the MODE button until "AUX" is displayed.
  4. Control audio playback and volume from your external device.

6.4. Microphone Input

  1. Plug a wired microphone into the MIC IN port on the rear control panel.
  2. Adjust the microphone volume using the MIC VOL knob.
  3. Adjust the echo effect using the ECHO knob.

6.5. FM Radio

  1. Press the MODE button repeatedly until "FM" is displayed.
  2. Press and hold the PLAY/PAUSE button to automatically scan and save available FM radio stations.
  3. Use the PREV and NEXT buttons to navigate between saved stations.

6.6. LED Lights Control

The speaker features integrated LED lights around the main woofer.

  • To turn the LED lights on or off, use the LED LIGHT switch on the rear control panel.
  • The lights may cycle through various colors automatically.

6.7. Volume Control

Adjust the overall master volume using the large VOLUME knob on the rear control panel.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners or solvents.
  • Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: If the speaker will not be used for an extended period, charge the battery at least once every three months to maintain its lifespan.

8. Troubleshooting

ProblemPossible CauseSolution
No powerBattery is depleted; Power switch is off; Power adapter not connected.Charge the speaker; Ensure power switch is ON; Connect power adapter securely.
No soundVolume is too low; Incorrect input mode; Device not paired (Bluetooth).Increase volume; Press MODE button to select correct input; Re-pair Bluetooth device.
Bluetooth not connectingSpeaker not in Bluetooth mode; Device too far; Interference.Switch speaker to Bluetooth mode; Move device closer; Turn off other Bluetooth devices.
USB/SD card not playingIncorrect file format; Card/drive corrupted; Speaker not in correct mode.Ensure files are MP3; Try another card/drive; Press MODE button to select USB/SD mode.

9. Specifications

  • Brand: ALIENPRO
  • Model: ALPHA-8
  • Speaker Size: 8 inches
  • Connectivity: Bluetooth, USB, SD Card, AUX Input, Microphone Input
  • Power Source: Rechargeable Battery, DC 9V
  • Features: Integrated LED Lights, FM Radio

10. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official ALIENPRO website. Do not attempt to service the product yourself, as this may void your warranty.

For further assistance, contact ALIENPRO customer service through the contact details provided on their official website.

© 2023 ALIENPRO. All rights reserved.

Related Documents - ALPHA-8

Preview ALIENPRO ALPHA-S Laser Light User Manual
Comprehensive user manual for the ALIENPRO ALPHA-S laser light, covering safety instructions, cleaning, maintenance, technical specifications, DMX control, installation, and warranty information for optimal performance and longevity.
Preview Catálogo de Productos Alienpro 2018
Explore el catálogo de productos Alienpro 2018, presentando soluciones de iluminación profesional, sistemas de audio, pantallas LED y equipos para eventos de alto rendimiento. Descubra cabezas móviles, láseres, woofers y más para su escenario.
Preview Manual del Altavoz Acústico KAISER MSS-8915 Boombox 15"
Guía completa para el altavoz acústico KAISER MSS-8915 Boombox 15", cubriendo configuración, conexión, especificaciones, seguridad y detalles de garantía.
Preview Sistema Uconnect 5/5 NAV: Guía de Usuario y Funcionalidades
Manual detallado del sistema Uconnect 5 y 5/5 NAV para vehículos, cubriendo seguridad, medios, navegación, teléfono, y servicios conectados en pantallas de 7 a 12 pulgadas.
Preview AKK ALPHA VTX Product Instruction Manual
This document provides detailed specifications and operating instructions for the AKK ALPHA series of Video Transmitters (VTX), including models ALPHA 4, ALPHA 5, ALPHA 8, and ALPHA 10. It covers technical specifications, power output, band and channel selection, and important usage notices.
Preview Sunn Alpha 112 Series Amplifier Technical Specifications and Schematics
Detailed technical specifications, parts list, block diagram, and schematic for the Sunn Alpha 112 Series self-contained amplifiers, including operating parameters, component lists, and circuit diagrams.