1. Introduction
This manual provides detailed instructions for the safe and effective operation of your U`King ZQ02054 Spider Moving Head Light. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
- Ensure the device is connected to a grounded power source.
- Do not expose the unit to rain or moisture.
- Maintain a minimum distance of 0.5 meters from flammable materials.
- Operating temperature range: -25°C to +35°C.
- Do not open the housing; refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source.
3. Product Overview
The U`King ZQ02054 is a versatile stage lighting unit featuring 9 RGB LEDs and three independent motors for dynamic lighting effects. It supports multiple control methods for various applications.
3.1 Key Features
- Moving Head Light Effect: Equipped with three independent motors and 9x10W RGB LEDs (3 Red, 3 Green, 3 Blue) for customizable lighting effects.
- Multiple Control Methods: Supports DMX-512, Master-Slave, Sound Activated, and Automatic modes.
- Professional Functions: Includes 1-25 times/second strobe, XY axis movement (X: 540 degrees, Y1: 120 degrees, Y2: 120 degrees), and adjustable beam angle (3-45 degrees).
- Multi-channel DMX: Offers 12-channel and 19-channel DMX modes for advanced control.
3.2 Components and Connections
4. Setup
4.1 Mounting
The U`King ZQ02054 is designed for stand mounting. Ensure the mounting surface or stand is stable and capable of supporting the weight of the fixture. Use appropriate clamps and safety cables (not included) for secure installation.
4.2 Power Connection
Connect the device to a standard AC power outlet using the provided power cord. Ensure the voltage matches the device's requirements (240 Volts). The unit operates via corded electric power.
4.3 DMX Connection (Optional)
For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. To link multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, forming a daisy chain.
5. Operating Modes
The unit features an LCD display and control buttons (MENU, UP, DOWN, ENTER) for selecting and adjusting operating modes.
5.1 DMX-512 Control Mode
This mode allows professional control via a DMX controller. The unit supports 12-channel and 19-channel DMX modes. Refer to the DMX channel chart (typically provided in a separate DMX manual or appendix) for specific functions of each channel.
- Connect the DMX controller to the DMX IN port.
- Use the MENU button to navigate to the DMX address setting.
- Use UP/DOWN to set the desired DMX start address.
- Press ENTER to confirm.
5.2 Master-Slave Mode
In Master-Slave mode, one unit acts as the master, controlling other linked units (slaves) to synchronize effects.
- Connect the DMX OUT of the master unit to the DMX IN of the first slave unit, and continue the chain.
- Set the master unit to a desired automatic or sound-activated mode.
- Set all slave units to "Slave" mode via their LCD displays.
5.3 Sound Activated Mode
The unit's built-in microphone detects sound and synchronizes light effects to the music beat.
- Press the MENU button until "Sound" mode is displayed.
- Press ENTER to activate. The light will now react to ambient sound.
5.4 Automatic Mode
The unit cycles through pre-programmed light shows automatically.
- Press the MENU button until "Auto" mode is displayed.
- Press ENTER to activate. The light will begin its automatic program.
6. Maintenance
- Cleaning: Regularly clean the lenses and exterior with a soft, lint-free cloth. Do not use abrasive cleaners.
- Inspection: Periodically check power cables, DMX cables, and mounting hardware for any signs of wear or damage.
- Storage: When not in use, store the unit in a dry, dust-free environment.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected; no power from outlet. | Check power cable connection; test outlet with another device. |
| Light not responding to DMX | Incorrect DMX address; faulty DMX cable; DMX controller issue. | Verify DMX address setting; check DMX cable integrity; ensure DMX controller is functioning correctly. |
| Sound activated mode not working | Microphone obstructed; low sound input; mode not selected. | Ensure microphone is clear; increase sound volume; confirm "Sound" mode is active. |
| Movement erratic or limited | Obstruction; internal issue. | Ensure clear path for moving parts. If problem persists, contact support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | ZQ02054 |
| Brand | U`King |
| Light Source | 9 x 10W RGB LEDs (3 Red, 3 Green, 3 Blue) |
| Power Source | Corded Electric |
| Voltage | 240 Volts |
| Light Source Wattage | 90 Watts |
| Output Wattage | 70 Watts |
| DMX Channels | 12 / 19 Channels |
| Control Modes | DMX-512, Master-Slave, Sound Activated, Automatic |
| Strobe Rate | 1-25 times/second |
| X-axis Rotation | 540 degrees |
| Y-axis Rotation | Y1: 120 degrees, Y2: 120 degrees |
| Beam Angle | 3-45 degrees |
| Operating Temperature | -25°C to +35°C |
| Material | Aluminum, Polyvinyl Chloride |
| Product Dimensions | 12.2"L x 12.2"W x 6"H |
| Item Weight | 1.87 pounds (850 Grams) |
| Batteries | 2 CR5 batteries required (included) *Note: This specification may refer to a remote control, which is not included with the product.* |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact U`King customer service through your purchase platform or visit the official U`King website. Please have your model number (ZQ02054) and purchase date available when contacting support.
Protection plans may be available for purchase separately. Refer to your retailer for details.
