Introduction
This manual provides detailed instructions for the THOKWOK TK-X2 Motorcycle Bluetooth Headset. Please read thoroughly to ensure proper use, optimal performance, and to familiarize yourself with all features and functions.
What's in the Box
The TK-X2 package includes the following components:
- TK-X2 Main Unit
- Headphone Cable
- Boom Microphone
- Button Microphone
- Charging Cable
- Clamp with Screws
- Velcro Clip
- Speaker Pad (2x)
- Allen Wrench
- User Manual

Setup
Charging the Device
Before first use, fully charge the TK-X2 unit. Connect the provided charging cable to the unit and a USB power source. A full charge typically takes approximately 2.5 hours. The unit will indicate charging status.

Installation
The TK-X2 helmet intercom offers two interchangeable microphones to suit different helmet types:
- Boom Microphone: Ideal for open-face or flip-face (convertible) helmets.
- Button Microphone: Suitable for full-face helmets.
Choose the appropriate microphone and install the main unit using either the clamp with screws or the velcro clip, ensuring secure attachment to your helmet. Position the speakers inside the helmet's ear pockets for optimal audio quality.

Operation
Power On/Off
To power on the device, long press the power button until you hear an audible prompt. To power off, long press the power button again until the device shuts down.
Pairing with Phone
To pair your TK-X2 with a smartphone:
- Long press the power button for 4 seconds until the red and blue lights flash alternately, indicating pairing mode.
- On your phone, go to Bluetooth settings and turn on Bluetooth.
- Find "TK-X2" in the list of available devices and select it to connect.
- Once connected, the blue light will flash slowly, and you can play music and make calls.
Music Playback
- Play/Pause: Click the phone button.
- Next Song: Click the forward button.
- Previous Song: Click the backward button.
- Volume Up: Hold the forward button.
- Volume Down: Hold the backward button.
Voice Assistant (Siri/S-Voice)
Long press the phone button for 2 seconds to activate your phone's voice assistant (Siri or S-Voice). You will hear "Voice Dial" as confirmation.
FM Radio
Double-click the phone button to start the FM radio. You will hear "Turn on radio". Double-click again to end FM radio.
Intercom Pairing (Multiple Units)
The TK-X2 supports full-duplex intercom for up to 3 riders, with 2 riders able to communicate simultaneously. For optimal performance, clear previous Bluetooth pairing records before initiating new intercom connections.
- Clearing Pairing Records: Turn on all units. Long press the power button for 8 seconds until pink lights flash twice, indicating records are cleared.
- Pairing Two Units:
- Ensure both units are in pairing mode (red and blue lights flashing alternately).
- Click the power button on one unit to initiate pairing. Once successful, blue lights will flash slowly.
- Pairing Three Units:
- First, pair Unit A and Unit B as described above.
- Then, hang up the intercom on Unit B.
- Put Unit B and Unit C into pairing mode (red and blue lights flashing alternately).
- Click the power button on Unit B to initiate pairing with Unit C.
- Once B and C are paired, hang up the intercom on Unit C.
- Double-click the power button on Unit A to connect with Unit C.
Refer to Video 1 (starting from 1:55 mark) for a visual guide on pairing multiple TK-X2 units.
Intercom Usage
- Start Intercom: Click the power button.
- Hang Up Intercom: Click the power button again.
- When an intercom call is active, music playback will automatically pause. Ending the intercom call will resume music.
Key Features

1000M Intercom Distance & Universal Pairing: The TK-X2 motorcycle Bluetooth headset enables full-duplex intercom communication up to 1000 meters (without obstacles) for 3 riders, with 2 riders able to converse simultaneously. It also features universal pairing, allowing connection with most Bluetooth intercoms on the market.

Noise Reduction & Upgraded Hi-Fi Stereo Speakers: Equipped with DSP and CVC advanced noise reduction technology and Bluetooth A2DP profile, the TK-X2 provides superior sound quality for both incoming and outgoing audio. Upgraded 40mm Hi-Fi stereo speakers deliver high-fidelity audio with deep bass, ensuring crystal-clear communications and music even at high speeds.

Bluetooth 5.0 & Long Standby Battery: Featuring Bluetooth 5.0 HFP profile, the TK-X2 allows access to Siri and S Voice commands for hands-free calls, music playback, FM radio, and GPS voice guidance. The built-in 650mAh battery offers low power consumption, providing up to 24 hours of music or intercom time and up to 280 hours of standby time.

Exchangeable Microphone & Great Helmet Compatibility: The TK-X2 helmet intercom includes two interchangeable microphones: a boom microphone for open-face or flip-face (convertible) helmets, and a button microphone for full-face helmets, ensuring broad compatibility.

Waterproof Design & Low Battery Alarm: The TK-X2's shell is constructed using an integral casting process, minimizing seams for excellent waterproof functionality, allowing use in any weather. The device broadcasts current battery status ("Battery full", "Battery medium", "Battery low") upon power-on.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the unit. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in active use.
- Water Exposure: While waterproof, ensure the charging port cover is securely closed before exposure to water to prevent damage.
Troubleshooting
| Problem | Solution |
|---|---|
| Device does not power on. | Ensure the battery is charged. Connect to a charger and try again. |
| Cannot pair with phone. | Ensure the TK-X2 is in pairing mode (red and blue lights flashing alternately). Turn off and on your phone's Bluetooth. Clear previous pairing records on the TK-X2 if necessary. |
| No sound from speakers. | Check speaker connections to the main unit. Ensure volume is not set to minimum on both the headset and your connected device. |
| Intercom not connecting. | Ensure all units have cleared previous pairing records. Follow the multi-unit pairing instructions carefully. Ensure units are within range. |
| Short battery life. | Ensure the device is fully charged before use. Extreme temperatures can affect battery performance. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | TK-X2 Single |
| Brand | THOKWOK |
| Connectivity Technology | Bluetooth |
| Bluetooth Version | 5.1 |
| Noise Control | Active Noise Cancellation |
| Intercom Distance | Up to 1000m (no obstacles) |
| Max Intercom Riders | 3 (2 talking simultaneously) |
| Battery Life (Music/Intercom) | Up to 24 hours |
| Standby Time | Up to 280 hours |
| Charging Time | 2.5 Hours |
| Water Resistance Level | Waterproof (IP67 equivalent) |
| Control Type | Button Control, Voice Control |
| Headphones Jack | Type-C |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Item Weight | 8.4 ounces |
| Product Dimensions | 3 x 1.6 x 0.83 inches |
| UPC | 797447004837 |
Warranty and Support
For warranty information, technical support, or any inquiries regarding your THOKWOK TK-X2 headset, please refer to the contact information provided on the product packaging or visit the official THOKWOK website. Keep your purchase receipt for warranty claims.





