1. Introduction
Thank you for choosing BLS Wireless LED Puck Lights. These versatile, battery-operated lights are designed to provide convenient illumination in various indoor spaces such as under cabinets, in closets, wardrobes, and hallways. Featuring remote control operation, adjustable brightness, and two color temperature options (Cool White and Warm White), these lights offer flexible lighting solutions for your home.
Image: Three BLS Wireless LED Puck Lights and their remote control.
2. What's Included
Your package should contain the following items:
- 3 x LED Puck Lights
- 1 x Remote Control
- 3 x Adhesive Tapes with Magnet
- 6 x Screws
- 1 x User Manual (this document)
3. Specifications
| Feature | Detail |
|---|---|
| Brand | BLS |
| Model Number | AA-1030 |
| Power Source | Battery Powered (3 x AA batteries per light, not included) |
| Light Source | LED |
| Brightness | 55 Lumens (Max) |
| Color Temperatures | Cool White (6500K), Warm White (3000K) |
| Control Method | Remote Control, Push Button (tap lens) |
| Timer Options | 15, 30, 60, 120 minutes |
| Battery Life | Up to 100 hours at moderate brightness (actual life varies with battery quality) |
| Mounting Type | Adhesive (with magnet) or Screws |
| Dimensions (L x W x H) | 3"L x 3"W x 1.2"H |
4. Setup
4.1. Battery Installation (Puck Lights)
- Twist the back cover of each puck light counter-clockwise to open the battery compartment.
- Insert 3 new AA batteries into each puck light, ensuring correct polarity (+/-). (Batteries are NOT included)
- Align the back cover and twist clockwise to securely close the compartment.
4.2. Battery Installation (Remote Control)
The remote control is powered by a coin battery, which is typically pre-installed. If replacement is needed, slide open the battery tray on the side or back of the remote and replace with a new CR2025 coin battery, ensuring correct polarity.
Image: Instructions for installing AA batteries in the puck lights and showing both adhesive and screw mounting options.
4.3. Mounting the Puck Lights
You have two options for mounting your BLS Wireless LED Puck Lights:
- Adhesive Mounting: Peel off the protective film from the adhesive tape (with magnet) and firmly press it onto the desired clean, dry surface. Then, attach the puck light to the magnetic adhesive. This allows for easy removal for battery changes.
- Screw Mounting: For a more permanent installation, use the provided screws. Mark the desired location, drill pilot holes if necessary, and secure the mounting plate with the screws. Then, twist the puck light onto the secured plate.
Image: Close-up of the adhesive tape with magnet for mounting.
Image: Close-up of the screws provided for mounting.
5. Operating Instructions
5.1. Turning Lights On/Off
- Manual Operation: Tap the center lens of the puck light to turn it ON or OFF.
- Remote Control: Press the 'ON' or 'OFF' button on the remote control. The remote can control all puck lights within a maximum distance of 10 feet.
Image: Demonstrates two ways to turn the lights on/off: by tapping the light or using the remote control.
5.2. Adjusting Brightness
Use the remote control to adjust the light brightness:
- Press the '50%' or '100%' buttons for quick brightness adjustments.
- Use the '+' and '-' buttons to incrementally increase or decrease brightness.
5.3. Changing Color Temperature
The puck lights offer two color temperature options:
- Press the 'WW' button on the remote for Warm White (3000K).
- Press the 'CW' button on the remote for Cool White (6500K).
Image: Illustration of the two switchable color temperatures: Warm White (3000K) and Cool White (6500K).
5.4. Timer Function
Set the lights to automatically turn off after a specific duration:
- Press the '15MIN', '30MIN', '60MIN', or '120MIN' buttons on the remote to activate the corresponding timer.
- The lights will flash briefly to confirm the timer setting.
5.5. Controlling Multiple Lights
The remote control is designed to operate multiple BLS puck lights simultaneously, provided they are within the 10-foot range and have a clear line of sight to the remote's infrared signal.
Image: The remote control can operate multiple puck lights at once.
Video: A demonstration of the BLS Puck Light with Remote, showcasing the two color temperature options.
6. Maintenance
6.1. Battery Replacement
Replace batteries in the puck lights when brightness diminishes or they stop responding. Always use new, high-quality AA batteries for optimal performance and battery life. For the remote, replace the coin battery if its range or responsiveness decreases.
6.2. Cleaning
Wipe the lights and remote with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
7. Troubleshooting
- Lights not turning on:
- Check if the AA batteries in the puck lights are correctly installed and not depleted.
- Ensure the remote control has a working battery and is pointed directly at the lights within the 10-foot range.
- Remote control not responding:
- Replace the coin battery in the remote control.
- Ensure there are no obstructions between the remote and the lights.
- Lights falling off after adhesive mounting:
- Ensure the mounting surface was clean and dry before applying the adhesive.
- For heavier items or rough surfaces, consider using the provided screws for a more secure installation.
- Short battery life:
- Battery life can vary significantly based on the quality of AA batteries used and the frequency/duration of use at high brightness settings. Use reputable, high-quality batteries.
8. Warranty and Support
BLS provides a 12-month warranty for this product. Additionally, lifetime technical support is available.
If you have any questions, concerns, or require assistance with your BLS Wireless LED Puck Lights, please do not hesitate to contact our customer support team via email. Refer to the product packaging or the official BLS website for contact details.