Diversey Bravo Power Foam Heavy Duty Stripper Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of the Diversey Bravo Power Foam Heavy Duty Stripper. This product is specifically formulated for the spot removal of floor finishes on various surfaces, including VCT, terrazzo, and concrete flooring. It is ideal for areas where machine scrubbing is impractical, such as stairwells and baseboards.

Please read this manual thoroughly before using the product to ensure proper application and to prevent potential damage or injury.

2. Safety Information

WARNING: CHEMICAL PRODUCT. READ ALL WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE USE.

• Personal Protective Equipment (PPE): Always wear appropriate PPE, including chemical-resistant gloves, eye protection (safety goggles), and protective clothing, to prevent skin and eye contact.
• Ventilation: Use in a well-ventilated area. Avoid breathing vapors or spray mist.
• Surface Compatibility: DO NOT USE ON PAINTED SURFACES, CARPET, OR FABRICS. Test on a small, inconspicuous area before full application to prevent possible damage.
• Slippery Surfaces: Floors will become very slippery until dry after application. Blockade treated areas and exercise extreme caution to prevent slips and falls.
• Storage: Store in a cool, dry place, away from direct sunlight and heat sources. Keep out of reach of children and pets.
• First Aid: In case of contact, flush affected area with plenty of water. If irritation persists, seek medical attention. If swallowed, do not induce vomiting; call a poison control center or doctor immediately.
• Disposal: Dispose of contents and container in accordance with local, regional, national, and international regulations.

3. Product Overview

Diversey Bravo Power Foam is an aerosol heavy-duty stripper designed for efficient removal of floor finishes. Its unique foam formulation offers several advantages:

• Targeted Application: The foam clings effectively to surfaces, including vertical areas like baseboards, ensuring the product stays where it's needed.
• Visual Indicator: The visible foam changes to a clear liquid when it has completed its work, providing a clear indication of readiness for removal.
• Versatile Use: Suitable for spot floor finish removal on VCT (Vinyl Composition Tile), terrazzo, and concrete flooring.
• Fragrance-Free: Contains no added fragrance.

Image 1: Diversey Bravo Power Foam Heavy Duty Stripper aerosol can.

4. Setup

Before beginning the stripping process, ensure the following steps are completed:

1. Read Instructions: Carefully read and understand all instructions and safety warnings in this manual and on the product label.
2. Prepare Area: Blockade the areas to be stripped to prevent unauthorized access. Place wet floor signs to warn of slippery conditions.
3. Ventilation: Ensure the work area is adequately ventilated. Open windows or use exhaust fans if necessary.
4. Wear PPE: Put on all required personal protective equipment, including chemical-resistant gloves, eye protection, and protective clothing.
5. Surface Test: Always test the product on a small, hidden patch of the surface to be stripped to confirm compatibility and prevent potential damage. Do not proceed if adverse reactions occur.

5. Operating Instructions

Follow these steps for effective application of Diversey Bravo Power Foam:

1. Shake Well: Shake the aerosol can well before each use to ensure proper mixing of contents.
2. Apply Product: Hold the can approximately 6-8 inches (15-20 centimeters) from the surface. Spray an even film of the product onto the area to be stripped.
3. Remove Overspray: Immediately wipe away any overspray from unintended surfaces.
4. Allow to Work: Allow the foam to work for at least 3-5 minutes. The foam will visibly change to a clear liquid, indicating it has penetrated the finish.
5. Scrub: After the dwell time, wet scrub the treated area with an abrasive pad to loosen the stripped finish.
6. Rinse: Thoroughly rinse the area with clean water to remove all stripper residue and loosened finish.
7. Dry: Allow the surface to dry completely before applying new finish or allowing traffic.

Image 2: Close-up of the product label with usage instructions and ingredients.

6. Maintenance and Storage

Proper storage ensures the longevity and effectiveness of the product:

• Storage Conditions: Store the aerosol cans in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight, heat, sparks, and open flames.
• Temperature: Do not store at temperatures above 120°F (49°C).
• Keep Sealed: Ensure the cap is securely placed on the can when not in use.
• Child Safety: Keep out of reach of children and unauthorized personnel.

7. Troubleshooting

If you encounter issues while using the Diversey Bravo Power Foam, consider the following:

• Product Not Stripping Effectively:
  • Ensure the surface was clean and dry before application.
  • Verify adequate dwell time (3-5 minutes). If the finish is very heavy, a slightly longer dwell time may be needed, but do not allow the product to dry on the surface.
  • Confirm proper agitation with an abrasive pad during scrubbing.
  • Check if the product is expired or has been stored improperly.
• Surface Damage:
  • Review the safety information. Ensure the product was not used on incompatible surfaces (e.g., painted surfaces).
  • Always perform a spot test on an inconspicuous area before full application.
• Aerosol Can Not Dispensing:
  • Shake the can vigorously before use.
  • Ensure the nozzle is not clogged. Clean if necessary.
  • Check if the can is empty or if the internal pressure is too low (e.g., due to cold temperatures).

8. Specifications

9. Ingredients

The Diversey Bravo Power Foam Heavy Duty Stripper contains the following ingredients:

• Water
• Isobutane
• Potassium Hydroxide
• Diethylene Glycol Butyl Ether
• Ethoxylated Secondary Alcohol
• 2-Butoxyethanol
• Monoethanolamine
• Benzyl Alcohol

For detailed chemical information and safety data sheets (SDS), please refer to the manufacturer's official website or contact their support.

10. Warranty and Support

For information regarding product warranty, technical support, or any other inquiries, please contact Diversey directly through their official website or customer service channels. Specific warranty details are typically provided at the point of purchase or on the manufacturer's official documentation.

Visit the Diversey Store on Amazon for more products and information.