1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Honeywell Ventnor 52-inch Indoor LED Ceiling Fan. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Honeywell Ventnor 52-inch Ceiling Fan in Bronze finish.
2. Safety Information
For your safety, always disconnect power at the circuit breaker before installing or servicing the fan. Ensure all electrical connections comply with local codes and ordinances. If you are unfamiliar with electrical wiring, consult a qualified electrician.
WARNING: Proposition 65 Warning:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Honeywell Ventnor Ceiling Fan safety certifications: DOE Compliant, ETL Listed, Prop 65.
3. Package Contents
Verify that all components are present before beginning installation:
- Motor
- Blades (5 total)
- Light Fixture
- Hardware Pack
4. Specifications
| Feature | Detail |
|---|---|
| Brand | Honeywell |
| Model Name | Ventnor |
| Model Number | 50607-01 |
| Color | Bronze |
| Blade Length | 52 Inches |
| Number of Blades | 5 |
| Blade Material | Wood (Dual-finish: Ancient Pine / Light Oak) |
| Motor | 3-Speed Reversible Motor |
| Light Type | Integrated LED (1400 lumens) |
| Control Type | Pull Chain Control |
| Mounting Options | 3 (Close, Standard, Angled) |
| Indoor/Outdoor Usage | Indoor (Dry Rated) |
| Product Dimensions | 12.87"D x 24.49"W x 8.74"H |
| Item Weight | 8.32 Kilograms |
| Voltage | 120 Volts |
| Wattage | 31 watts |
5. Installation
The Honeywell Ventnor ceiling fan offers three mounting options to suit various ceiling types: close-mount, standard downrod, and angled-mount. A 4-inch downrod is included for standard installation. Ensure the mounting location can support the fan's weight and that all electrical wiring is properly connected.
Three mounting options: Closemount, Standard, and Angled.
The fan features dual-finish reversible blades, allowing you to choose between Ancient Pine and Light Oak to match your room's aesthetic. The motor housing is also reversible, enabling the fan to circulate air for cooling in summer and to help distribute warm air in winter.
Reversible blades with Ancient Pine and Light Oak finishes.
Installation typically takes 45-60 minutes. Refer to the detailed wiring diagrams and step-by-step instructions provided in the full installation guide for proper setup.
Easy installation, estimated 45-60 minutes.
6. Operating Instructions
The Honeywell Ventnor fan is controlled by two pull chains located on the light fixture. One pull chain operates the fan speeds, and the other controls the integrated LED light.
Pull chains for fan speed and light control.
Fan Speed Control:
Pull the fan chain to cycle through the three available speeds: High, Medium, and Low. Pulling the chain again will turn the fan off. The fan features a quiet, 3-speed reversible motor for optimal airflow.
3-speed reversible motor for year-round comfort.
Light Control:
Pull the light chain to turn the integrated LED light on or off. The LED light provides 1400 lumens of illumination.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Use a soft, damp cloth to clean the fan blades and motor housing. Avoid abrasive cleaners that may scratch surfaces.
- Blade Inspection: Periodically check that all blade screws are tight. Loose screws can cause wobbling and noise.
- Light Fixture: The integrated LED light is designed for long-term use and typically does not require bulb replacement.
8. Troubleshooting
If you experience issues with your fan, consult the following common troubleshooting steps:
- Fan Does Not Start: Check that the circuit breaker is on and that all wiring connections are secure. Ensure the pull chain is in the 'on' position.
- Fan Wobbles: Verify that all blade screws are tightened. Check that the mounting bracket is securely fastened to the ceiling junction box. Ensure blades are balanced; a balancing kit may be required.
- Light Does Not Work: Confirm the light pull chain is in the 'on' position. Check electrical connections to the light fixture.
- Noisy Operation: Ensure all screws are tight. Check for any loose parts or obstructions. If connected to a dimmer switch, replace it with a standard on/off switch as dimmer switches can cause humming.
9. Warranty and Support
The Honeywell Ventnor Ceiling Fan is backed by a 1-year manufacturer's warranty. For warranty claims or technical support, please contact Honeywell customer service. Keep your proof of purchase for warranty validation.
For additional information or assistance, please visit the official Honeywell website or contact their customer support.
