CubicFun LED Pirate Ship 3D Puzzle: Queen Anne's Revenge Instruction Manual

Introduction

This instruction manual provides detailed guidance for assembling your CubicFun LED Pirate Ship 3D Puzzle, model L520h-0, a 1:95 scale replica of the Queen Anne's Revenge. This complex model features a detailed interior, 15 warm LED bulbs for illumination, and is designed for assembly without the need for glue or tools. It offers an engaging building experience for enthusiasts aged 14 and up.

Safety Information

This product is not intended for children under 3 years due to small parts which may present a choking hazard.

Package Contents

Your CubicFun LED Pirate Ship 3D Puzzle package includes:

• Pre-cut EPS foam board puzzle pieces (391 pieces)
• LED lighting kit (15 warm LED bulbs)
• Illustrated instruction booklet
• Plastic deck guns (32 pieces)
• Display stand

Image: All components included in the CubicFun LED Pirate Ship 3D Puzzle kit.

Setup & Assembly

This model is recommended for ages 14 and up, with an estimated assembly time of 4+ hours. No glue or tools are required for assembly.

General Assembly Tips:

• Follow the Instruction Booklet: Refer to the detailed illustrations and step-by-step instructions provided in the manual. Each puzzle piece is numbered for easy identification.
• Punch Out Pieces Carefully: It is advised to punch out all interlocking holes before assembly. Detach pieces as needed according to the illustration steps to avoid confusion.
• Patience is Key: Do not force any two pieces or components to interlock. If a part is difficult to insert, gently pinch it to aid fitting.
• Correct Orientation: Every puzzle piece has two sides and can only be inserted in one direction. Ensure the correct side of the pieces faces outward.
• LED Wiring: The card slots are designed to align and fix the LED wiring during installation.

Visual Guides:

Image: Key features of the assembled model, including LED lights and detailed components.

Image: Example of the detailed 3D illustration instructions for assembly.

Operating Instructions (LED Lights)

The Queen Anne's Revenge model features 15 warm LED bulbs to enhance its appearance.

• Battery Installation: The LED lighting system requires 2 AA batteries (not included). Locate the battery compartment, typically integrated into the display stand or base of the model. Insert the batteries according to the polarity markings.
• Activating Lights: Once batteries are installed, locate the power switch (usually on the battery compartment) and switch it to the 'ON' position to illuminate the model.

Maintenance

• Cleaning: Gently dust the assembled model with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these may damage the paper and EPS foam board.
• Storage: Store the model in a cool, dry place away from direct sunlight and excessive humidity to prevent warping or fading of the materials.
• Battery Care: If the model will not be used for an extended period, remove the AA batteries to prevent leakage and potential damage to the LED circuit.

Troubleshooting

• Pieces Not Fitting: Ensure you are using the correct pieces for the current step by checking the numbering and illustrations. Do not force pieces; gently adjust or re-examine the connection points.
• LED Lights Not Working: Check that the 2 AA batteries are correctly installed with the proper polarity. Ensure the power switch is in the 'ON' position. If issues persist, verify all wiring connections are secure within the card slots.
• Model Instability: Double-check all interlocking connections, especially in the base and hull sections, to ensure they are fully seated.

Specifications

Warranty & Support

For any questions, concerns, or support regarding your CubicFun LED Pirate Ship 3D Puzzle, please contact CubicFun customer service. Refer to the product packaging or the official CubicFun website for contact details and warranty information.