hansgrohe MyCube Kitchen Tap M Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your hansgrohe MyCube Kitchen Tap M. Please read these instructions carefully before beginning installation or use, and retain them for future reference.

The hansgrohe MyCube Kitchen Tap M is a single-lever kitchen faucet designed for ease of use and durability. It features a chrome finish, a 360° swivel spout, and hansgrohe AirPower technology for reduced splashing.

2. Setup and Installation

Before installation, ensure you have all necessary components and tools. Basic tools such as wrenches and screwdrivers may be required.

2.1. Included Components

• 1 x MyCube Kitchen Sink Mixer
• Connection Hoses (G ⅜; DN15)
• Fixing Set
• Installation Instruction (this document)

2.2. Installation Requirements

• Suitable for tap holes with a diameter of 34 mm or larger.
• Flexible connection hoses are certified for use with drinking water.
• Compatible with continuous flow heaters.

2.3. Installation Steps

1. Prepare the sink or countertop by ensuring the tap hole meets the diameter requirement.
2. Insert the faucet body into the tap hole.
3. Secure the faucet from underneath the sink using the provided fixing set. Ensure the faucet is stable and properly aligned.
4. Connect the flexible hot and cold water supply hoses to the corresponding angle valves. Ensure connections are tight to prevent leaks.
5. Flush the water lines before final connection to remove any debris.
6. Test the faucet for proper operation and check for any leaks.

Figure 1: Illustration of the easy installation process for the hansgrohe MyCube Kitchen Tap.

3. Operating Instructions

The hansgrohe MyCube Kitchen Tap M is designed for intuitive operation with a single lever.

3.1. Water Flow and Temperature Control

• The ergonomically shaped lever controls both water volume and temperature.
• Move the lever up to increase water flow and down to decrease it.
• Move the lever to the left for hot water and to the right for cold water.

Figure 2: Demonstrating the ease of use for water flow and temperature control.

3.2. AirPower Technology

The faucet incorporates hansgrohe AirPower technology, which enriches the water with air. This creates a softer, fuller water jet that reduces splashing and enhances the washing experience.

Figure 3: The AirPower feature provides a gentle, splash-reducing water stream.

3.3. Water Conservation (Eco Setting)

The faucet is designed with an Eco setting. In the first lever position, water flow is reduced by approximately 40% to conserve water. Fully opening the lever allows for the maximum flow rate of up to 12 liters per minute (at 3 bar).

3.4. Swivel Spout

The spout can be swiveled through 360°, providing increased flexibility and reach within your sink area. This feature offers more room to move, with approximately 155 mm space between the spout and the sink basin.

Figure 4: The 360° swivel function offers enhanced freedom of movement.

Figure 5: The Comfort Zone design provides ample space and flexibility under the spout.

4. Maintenance

Proper care and maintenance will ensure the longevity and aesthetic appeal of your hansgrohe MyCube Kitchen Tap M.

4.1. Cleaning the Chrome Finish

• Clean the chrome surface regularly with a soft cloth and a mild, non-abrasive cleaning agent.
• Avoid using harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the chrome finish.
• Rinse thoroughly with clean water after cleaning and dry with a soft cloth to prevent water spots.

4.2. Ceramic Mixer System

The faucet is equipped with a high-quality, smooth-running ceramic mixer system designed for long-lasting functionality and precise control. No specific user maintenance is required for the ceramic cartridge itself, but ensuring clean water supply helps prevent premature wear.

5. Troubleshooting

If you encounter issues with your hansgrohe MyCube Kitchen Tap M, refer to the following common problems and solutions:

5.1. Low Water Flow

• Check water supply: Ensure the main water supply valves are fully open.
• Aerator blockage: The aerator at the spout tip may be clogged with debris or limescale. Unscrew the aerator, clean it, and reattach.
• Hose kinks: Check the connection hoses under the sink for any kinks or obstructions.

5.2. Leaks from Faucet Base or Hoses

• Loose connections: Ensure all hose connections to the angle valves and the faucet body are securely tightened. Do not overtighten.
• Worn seals: If leaks persist, internal seals or the ceramic cartridge may be worn. Contact hansgrohe customer support for assistance.

5.3. Difficulty Adjusting Temperature or Flow

• Ceramic cartridge issue: If the lever feels stiff or unresponsive, the ceramic cartridge may need inspection or replacement. This typically requires professional service.

6. Specifications

Figure 6: Technical drawing showing key dimensions of the faucet.

7. Warranty and Spare Parts

hansgrohe products are manufactured to high-quality standards. While specific warranty details are not provided in this document, hansgrohe typically offers a manufacturer's warranty on its products. Please refer to the official hansgrohe website or your purchase documentation for detailed warranty terms and conditions.

hansgrohe guarantees the availability of spare parts for up to 15 years after a product range has been discontinued, ensuring long-term serviceability of your faucet.

8. Customer Support

For further assistance, technical support, or to inquire about spare parts, please contact hansgrohe customer service or visit their official website.

You can also find more information and products by visiting the hansgrohe Store.