Arebos Portable Workshop Tool Cabinet AR-HE-WW41B User Manual

1. Introduction

Thank you for choosing the Arebos Portable Workshop Tool Cabinet. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new tool cabinet. Please read these instructions carefully before use and retain them for future reference.

This tool cabinet is designed for organizing and storing various tools and workshop accessories, offering mobility and secure storage solutions.

2. Safety Instructions

• Always ensure the cabinet is placed on a stable, level surface to prevent tipping.
• Do not overload drawers. Distribute weight evenly to maintain stability.
• Engage the parking brakes on the swivel casters when the cabinet is stationary to prevent unintended movement.
• Utilize the integrated transport lock to secure all drawers before moving the cabinet.
• Avoid opening multiple drawers simultaneously, as this can compromise stability and cause the cabinet to tip over.
• Keep hands and fingers clear of drawer slides during opening and closing to prevent pinching.
• This product is intended for tool storage. Do not use it as a step stool or for purposes other than its intended use.
• Keep children and unauthorized persons away from the cabinet, especially when drawers are open or the cabinet is in motion.

3. Package Contents

Verify that all components are present and undamaged upon unpacking. If any parts are missing or damaged, contact Arebos customer support.

• Tool Cabinet Body (1)
• Drawers (4)
• Anti-slip Mats for Drawers (4)
• Casters (2 fixed, 2 swivel with brake)
• Push Handle (1)
• Key Box / Keys (for main compartment lock)
• Assembly Hardware (screws, washers, etc.)
• User Manual (this document)

4. Setup and Assembly

Assembly typically involves attaching the casters and the push handle. Follow these general steps:

1. Unpacking: Carefully remove all components from the packaging. Retain packaging materials until assembly is complete.
2. Caster Installation: Turn the cabinet upside down (ensure it is empty and stable). Attach the two fixed casters to one end of the cabinet's base and the two swivel casters with brakes to the opposite end using the provided hardware. Ensure all screws are tightened securely.
3. Handle Attachment: Attach the push handle to the side of the cabinet using the designated mounting points and hardware.
4. Upright Positioning: With assistance, carefully turn the cabinet upright onto its casters.
5. Drawer Preparation: Insert the anti-slip mats into each drawer.
6. Testing: Test the movement of the casters and the functionality of the brakes. Verify that all drawers open and close smoothly and that the interlock system functions correctly.

Figure 1: Product dimensions of the Arebos tool cabinet, showing overall height, width, depth, and individual drawer sizes.

Figure 2: Overview of key features including anti-slip mats, ball-bearing drawers, practical handle, and 360° swivel wheels with brake.

5. Operating Instructions

5.1 Moving the Cabinet

• Ensure all drawers are closed and the integrated transport lock is engaged.
• Release the parking brakes on the swivel casters.
• Use the push handle to maneuver the cabinet to the desired location.
• Once in position, engage the parking brakes to secure the cabinet.

Figure 3: Detail of the 360° swivel casters equipped with parking brakes for flexible movement and secure positioning.

5.2 Using the Drawers

• The drawers feature ball-bearing slides for smooth opening and closing.
• Each drawer is equipped with an anti-slip mat to prevent tools from shifting and rattling.
• To open a drawer, pull the full-width handle. Due to the safety mechanism, only one drawer can be opened at a time.
• To close, push the drawer firmly until it is fully seated.

Figure 4: Close-up view of the ball-bearing drawer slides, ensuring smooth and effortless operation.

5.3 Integrated Transport Lock

• The cabinet includes an interlock system to secure all drawers simultaneously.
• To engage the lock, ensure all drawers are fully closed. The mechanism will prevent drawers from opening during transport.
• To disengage, a specific action (e.g., turning a key or pressing a lever, as indicated by the key box component) will release the lock, allowing individual drawers to open.

Figure 5: Illustration of the integrated transport lock mechanism, designed to secure all drawers for safe movement.

6. Maintenance

• Cleaning: Wipe the cabinet surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the finish.
• Drawer Slides: Periodically inspect and lubricate the ball-bearing drawer slides with a silicone-based lubricant to ensure continued smooth operation.
• Casters: Check casters regularly for debris or wear. Clean as needed and ensure they rotate freely. Tighten any loose caster bolts.
• Anti-slip Mats: Clean the anti-slip mats as needed to remove dirt or grease.
• General Inspection: Routinely check all fasteners and connections for tightness. Tighten any loose hardware to maintain structural integrity.

7. Troubleshooting

8. Specifications

• Brand: Arebos
• Model Number: AR-HE-WW41B
• Color: Blue
• Material: Alloy Steel
• Product Dimensions (L x W x H): 72 x 39 x 68 cm (28.3 x 15.4 x 26.8 inches)
• Item Weight: 22.5 kg (49.6 lbs)
• Number of Drawers: 4
• Additional Compartments: 1 large bottom compartment
• Casters: 2 fixed, 2 swivel with parking brake (360° rotation)
• Drawer Features: Ball-bearing slides, anti-slip mats, full-width handles
• Safety Features: Integrated transport lock, single-drawer opening mechanism
• Recommended Use: Tool storage, workshop organization

9. Warranty and Support

For warranty information, technical support, or to order replacement parts, please contact Arebos customer service through their official website or the retailer where the product was purchased. Please have your model number (AR-HE-WW41B) and purchase date available when contacting support.