Shinko 244 Series Front/Rear Tire - 2.75-21

Shinko Dual Sport 244 Series Tire Instruction Manual

Model: 244 Series Front/Rear Tire - 2.75-21

1. Introduction

This instruction manual provides essential information for the proper installation, usage, and maintenance of your Shinko Dual Sport 244 Series Front/Rear Tire. Designed for versatility, this tire offers reliable performance across both on-road and off-road conditions. Adhering to the guidelines in this manual will help ensure optimal tire life and rider safety.

2. Safety Information

  • Professional Installation: Tire installation should always be performed by a qualified tire professional to ensure correct mounting and seating.
  • Vehicle Compatibility: Always verify tire specifications against your vehicle's placard (typically on an inside door panel or frame) and the vehicle owner's manual.
  • DOT Approved: This tire is DOT approved, indicating it meets the safety standards set by the U.S. Department of Transportation.
  • Tube Type: This tire is designed for use with an inner tube. Ensure the correct size and type of inner tube is used.
  • Load and Speed Ratings: Do not exceed the tire's specified load (52) and speed (P) ratings.
  • Tire Pressure: Maintain correct tire pressure as specified by your vehicle manufacturer. Incorrect pressure can lead to tire failure and unsafe riding conditions.

3. Installation

For safety and optimal performance, tire installation must be carried out by a certified professional. Incorrect installation can lead to serious injury or tire failure.

  1. Ensure the tire size (2.75-21) and type (tube type) match your vehicle's requirements.
  2. Inspect the rim for any damage or corrosion before mounting.
  3. Install a new, appropriate-sized inner tube with the tire.
  4. Lubricate the tire beads and rim for smooth mounting.
  5. Inflate the tire to the recommended pressure, ensuring the beads seat correctly.
  6. Re-check tire pressure after a short period of use.
Shinko Dual Sport 244 Series Front/Rear Tire

Image: Shinko Dual Sport 244 Series Front/Rear Tire, showcasing its aggressive tread pattern suitable for various terrains.

4. Operating and Usage

The Shinko Dual Sport 244 Series tire is engineered for a balanced performance on both paved roads and unpaved trails.

  • Dual Purpose Design: This tire features a tread pattern optimized for traction and stability across diverse surfaces, from asphalt to dirt.
  • On-Road Performance: Provides stable handling and acceptable wear characteristics for street use.
  • Off-Road Performance: The aggressive knob pattern offers grip in loose terrain, mud, and gravel. Adjusting tire pressure slightly for off-road conditions (within safe limits) can enhance traction.
  • Wet Conditions: Exercise caution in wet conditions, as traction may be reduced.

5. Maintenance

Regular maintenance is crucial for the longevity and safety of your tires.

  • Tire Pressure: Check tire pressure weekly using a reliable gauge. Refer to your vehicle's manual for recommended pressures.
  • Tread Inspection: Regularly inspect the tire tread for wear, cuts, punctures, or embedded objects. Remove any foreign objects carefully.
  • Tire Rotation: While this tire is designed for front or rear fitment, consult a professional for advice on rotation schedules if applicable to your riding style and vehicle.
  • Cleaning: Clean tires with mild soap and water. Avoid harsh chemicals that can degrade rubber.
  • Storage: When storing, keep tires in a cool, dry place away from direct sunlight and ozone-producing equipment.

6. Troubleshooting

If you encounter any issues with your Shinko 244 Series tire, consider the following:

  • Rapid Wear: Check tire pressure and alignment. Over-inflation or under-inflation can cause uneven wear.
  • Loss of Pressure: Inspect for punctures, valve stem issues, or bead leaks. If a puncture is found, professional repair or replacement is necessary.
  • Vibration/Unusual Noise: This could indicate an unbalanced tire, damaged rim, or internal tire damage. Seek professional inspection immediately.
  • Poor Handling: Verify tire pressure and ensure the tire is correctly seated on the rim.

For any persistent or severe issues, consult a qualified motorcycle tire technician.

7. Specifications

FeatureSpecification
BrandShinko
Model244 Series Front/Rear Tire
Tire Size2.75-21
Load Rating52 (441 lbs)
Speed RatingP (93 mph)
PositionFront/Rear (Dual Fitment)
Tire ApplicationAll-Terrain / Dual Sport
Tire TypeTube Type
Ply Rating4-ply rating
Construction TypeBias-Ply
Rim Size21 Inches
Section Width70 Inches
Tire Diameter70 Inches
Item Weight9.2 Pounds
UPC644978868523
Manufacturer Part Number87-4762

8. Warranty and Support

For specific warranty information regarding your Shinko Dual Sport 244 Series tire, please refer to the documentation provided at the time of purchase or contact Shinko customer service directly. Keep your purchase receipt as proof of purchase.

For technical support or further inquiries, please visit the official Shinko Tires website or contact your authorized Shinko dealer.

Related Documents - 244 Series Front/Rear Tire - 2.75-21

Preview Shinko SIF-600 PLC Interface Unit: Instruction Manual
This comprehensive instruction manual details the Shinko SIF-600 PLC Interface Unit, covering installation, setup, operation, and troubleshooting for industrial automation applications. Essential for safe and effective use.
Preview Shinko ACS2 Digital Indicating Controller Instruction Manual
Detailed instruction manual for the Shinko ACS2 Digital Indicating Controller, covering installation, wiring, operation, settings, and troubleshooting for industrial temperature control applications.
Preview Shinko QMC1 Communication Expansion Module Instruction Manual
This instruction manual provides comprehensive details on the Shinko QMC1 Communication Expansion Module, covering its installation, wiring, operation, communication protocols, and specifications for industrial control systems. Learn about its features, setup, and integration with host computers and PLCs.
Preview WIL-101-TU デジタル指示濁度/SS 計 取扱説明書
SHINKO WIL-101-TU デジタル指示濁度/SS 計の取扱説明書。本製品の設置、機能、操作、配線、仕様、校正、通信、およびトラブルシューティングに関する詳細情報を提供します。
Preview Shinko QMC1-C 通信拡張モジュール 取扱説明書
Shinko QMC1-C 通信拡張モジュールに関する設置、機能、操作、および取扱い方法を説明する公式取扱説明書。
Preview Shinko ACS2 Digital Indicating Controller Instruction Manual
Comprehensive instruction manual for the Shinko ACS2 digital indicating controller, covering installation, wiring, operation, settings, and specifications for industrial applications.