Sauder Harbor View Media Fireplace Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Sauder Harbor View Media Fireplace, Model 422993. Please read all instructions carefully before beginning assembly or operation to ensure safe and proper use of the product. Retain this manual for future reference.

Safety Information

• Always follow local electrical codes and safety standards.
• Ensure the unit is placed on a stable, level surface.
• Do not overload electrical outlets.
• Keep flammable materials away from the electric firebox.
• Unplug the unit from the power source before cleaning or performing any maintenance.
• This unit is designed for indoor use only.

Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, contact Sauder customer support.

• Assembly instructions
• Hardware kit
• Engineered wood panels and components
• Electric firebox insert with remote control

Setup and Assembly

Assembly of the Sauder Harbor View Media Fireplace requires careful attention to the provided manufacturer's instructions. It is recommended that two people assemble this unit to ensure stability and ease of construction.

1. Preparation: Clear a spacious, clean area for assembly. Lay out all parts and hardware.
2. Panel Identification: Refer to the assembly instructions to identify each panel. Pay close attention to diagrams to ensure correct orientation.
3. Hardware Installation: Insert all locking hubs and pins straight to ensure a secure fit. Avoid overtightening screws, especially when using power tools, to prevent damage to the engineered wood.
4. Structural Assembly: Follow the step-by-step diagrams to connect the main structural components.
5. Firebox Integration: Carefully insert the electric firebox into its designated opening.
6. Door Installation: Attach the louvered doors, ensuring they open and close smoothly.
7. Cord Management: Utilize the integrated cord management system to route and conceal power cords for electronic devices and the firebox.

Operating Instructions

Electric Firebox Operation

The integrated electric firebox provides supplemental heat and a visual flame effect. It is controlled via a remote control or the control panel on the unit.

• Power On/Off: Press the power button on the remote or control panel to turn the firebox on or off.
• Flame Adjustment: Use the flame button on the remote to cycle through different flame brightness settings.
• Heat Function: Press the heat button to activate or deactivate the heating element. The firebox heats up to 400 square feet. Note that there is no thermostat; the heat function is either on or off.
• Overheat Protection: The firebox is equipped with built-in overheat protection, which will automatically shut off the unit if it reaches an unsafe temperature.

Storage and Shelving

The media fireplace features various storage options:

• Top Surface: Accommodates TVs up to 60 inches and weighing 70 lbs or less.
• Divided Open Shelving: Located above the firebox, these shelves are ideal for audio/video equipment such as soundbars, media players, or gaming consoles.
• Behind Louver Doors: Each side features a louver detailed door concealing a storage area with an adjustable shelf. These shelves can be repositioned to accommodate items of various heights.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your media fireplace.

• Cleaning the Wood Surfaces: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Cleaning the Firebox: Ensure the firebox is unplugged and cool before cleaning. Wipe the glass and exterior with a soft, lint-free cloth. Do not spray water directly onto the unit.
• Dusting: Regularly dust all surfaces to prevent buildup.
• Hardware Check: Periodically check all assembly hardware to ensure it remains tight. Retighten if necessary.

Troubleshooting

If you encounter issues with your Sauder Harbor View Media Fireplace, refer to the following common solutions:

• Firebox Not Turning On: Ensure the unit is properly plugged into a functional electrical outlet. Check the power switch on the unit and the remote control batteries.
• No Heat Output: Verify that the heat function is activated. If the unit has been running for an extended period, the overheat protection may have engaged; allow it to cool down before attempting to restart.
• Unusual Noises from Firebox: Some operational noise is normal for electric fireplaces due to fans and flame effects. If the noise is excessive or unusual, ensure the unit is on a level surface and there are no obstructions to the fan vents.
• Loose Components: If any part of the furniture feels loose, refer to the assembly instructions and retighten the corresponding hardware.

For persistent issues not resolved by these steps, contact Sauder customer support.

Specifications

Warranty Information

The Sauder Harbor View Media Fireplace, Model 422993, comes with a Limited Warranty. For specific details regarding coverage, duration, and terms, please refer to the warranty documentation included with your purchase or contact Sauder customer support directly.

Customer Support

For assembly assistance, missing parts, troubleshooting, or warranty inquiries, please contact Sauder customer support. You can typically find contact information on the Sauder website or in the documentation provided with your product.

Online Resources: Visit the official Sauder website for additional support, FAQs, and product information.