XGIMI Shutter 3D Glasses Instruction Manual

Introduction

The XGIMI Shutter 3D Glasses are designed to deliver an immersive 3D viewing experience when paired with compatible DLP-LINK projectors. These lightweight glasses offer high light transmittance and a high refresh rate for clear, smooth 3D images, ensuring comfort even during extended use.

Key Features:

• Delivers a true 3D experience.
• Supports Bluetooth signal.
• Cool appearance, light design, comfortable to wear without dizziness.
• High-speed response.
• Auto Power-off function for energy efficiency.
• Low-power self-detected function with LED flash for low battery prompt.

Image: XGIMI Shutter 3D Glasses, showcasing their sleek design.

Setup

Compatibility

These 3D glasses are designed for use with projectors that support active 3D glasses and DLP-LINK technology. The 3D effect is only available when the source content is in a 3D format.

• Compatible Devices: 3D DLP-LINK Projectors (e.g., XGIMI Horizon, Horizon Pro, Elfin, H2, MOGO2 PRO, MoGo 3 Pro, MoGo 4, Halo+).
• Incompatible Devices: Ordinary TVs, Ordinary Projectors (without active 3D DLP-LINK support).

Connecting to a 3D Source (e.g., Blu-ray Player)

To enjoy 3D movies, you will need a 3D Blu-ray disc and a 3D-capable Blu-ray player. Ensure your projector and Blu-ray player are connected using HDMI 2.0 cables for optimal performance.

1. Connect your 3D-capable Blu-ray player to your DLP-LINK projector using an HDMI 2.0 cable.
2. Insert a 3D Blu-ray disc into the Blu-ray player.
3. On your projector, select the correct HDMI input corresponding to your Blu-ray player.
4. Once the 3D content starts playing, the screen may appear split (side-by-side or top-and-bottom).
5. Access your projector's 3D settings (usually found under 'Image' or 'Display' settings).
6. Select the appropriate 3D mode: 'Frame Packing' for Blu-ray discs, 'Side-by-Side' if the screen is split horizontally, or 'Top-and-Bottom' if the screen is split vertically.

Note: Always turn off 3D mode on the projector when not watching 3D content or switching to 2D content to avoid display issues.

Obtaining 3D Content

In addition to Blu-ray discs, some streaming applications may offer 3D content. For example, the Vudu app (available in the United States) provides a selection of 3D movies. Ensure your streaming device (e.g., Fire TV Stick) is compatible and supports 3D playback.

Operating the 3D Glasses

Power On/Off and Eye Switching

The 3D glasses feature a single button located in the middle of the frame for control:

• Power On: Press the button once to turn on the glasses.
• Switch Left/Right Eye: Press the button again to switch the synchronization between the left and right eyes. This is useful if the 3D effect appears inverted.
• Power Off: Press and hold the button for 3 seconds to turn off the glasses.

Charging and Battery Life

The glasses are equipped with a built-in Lithium Ion battery. A 2-3 hour charge provides up to 30 hours of continuous use. A low battery LED will flash to prompt the user when the battery is low.

Optimal Viewing Distance

For the best 3D viewing experience, maintain an optimal viewing distance of 2-5 meters from the projection screen.

Maintenance

To ensure the longevity and optimal performance of your XGIMI Shutter 3D Glasses, follow these maintenance guidelines:

• Cleaning: Use the provided cloth wipe or a soft, lint-free cloth to gently clean the lenses. Avoid abrasive materials or harsh chemicals.
• Storage: Store the glasses in their protective case when not in use to prevent scratches and damage.
• Charging: Charge the glasses fully before extended periods of non-use to maintain battery health.
• Handling: Handle the glasses with care. Avoid dropping them or applying excessive force, especially to the arms, as they can be fragile.

Troubleshooting

If you encounter issues with your 3D glasses, consider the following:

• No 3D Effect: Ensure your content is in a 3D format and your projector is set to the correct 3D mode (Frame Packing, Side-by-Side, or Top-and-Bottom). Verify that your projector supports active 3D glasses.
• Inverted 3D Effect: Press the button on the glasses once to switch the left/right eye synchronization.
• Glasses Not Turning On: Check the battery level. If the low battery LED is flashing, charge the glasses.
• Blurry or Unclear Image: Ensure the glasses are clean and that the projector's focus is correctly adjusted. Verify you are within the optimal viewing distance (2-5 meters).

Specifications

Warranty & Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official XGIMI website. Keep your proof of purchase for any warranty claims.