OSRAM NIGHT BREAKER LASER H11 Halogen Headlamp Instruction Manual

1. Introduction

The OSRAM NIGHT BREAKER LASER H11 (Next Generation) is a high-performance halogen headlamp designed for passenger cars. This product offers enhanced brightness and an extended light beam compared to standard halogen bulbs, improving visibility and safety during night driving. It is ECE certified, ensuring road legality.

Key features include:

• Up to 150% more brightness than standard halogen bulbs.
• Light beam projection up to 150 meters long.
• Manufactured using innovative laser ablation technology for optimized light output.
• Completely road legal and ECE certified.

2. Safety Information

Always observe the following safety precautions when handling and installing automotive bulbs:

• Disconnect Power: Ensure the vehicle's ignition is off and the headlights are switched off before attempting installation or removal.
• Wear Protective Gear: Use gloves and eye protection to prevent injury and to avoid touching the glass part of the bulb.
• Avoid Touching Glass: Oils from your skin can create hot spots on the bulb's surface, leading to premature failure. Handle the bulb by its plastic base only.
• Allow Cooling: Headlamps can become very hot during operation. Allow sufficient time for the bulbs to cool down before handling.
• Proper Disposal: Dispose of old bulbs according to local regulations.
• Professional Installation: If you are unsure about the installation process, consult a qualified automotive technician.

3. Package Contents

Your OSRAM NIGHT BREAKER LASER H11 package (duo box) contains:

• 2 x OSRAM NIGHT BREAKER LASER H11 Halogen Headlamps (Model: 64211NL-HCB)

Image: Front view of the OSRAM NIGHT BREAKER LASER H11 duo box packaging, showing two H11 bulbs and key features like +150% brightness and +150m light distance.

Image: Rear view of the OSRAM NIGHT BREAKER LASER H11 duo box packaging, displaying multilingual product information, brightness, distance, and light color specifications, along with a QR code.

4. Setup (Installation)

The installation process for H11 halogen headlamps is generally similar across many vehicle models, but specific steps may vary. Always refer to your vehicle's owner's manual for detailed instructions.

1. Prepare the Vehicle: Park your vehicle on a level surface, turn off the engine, engage the parking brake, and ensure the headlights are off. For safety, you may disconnect the negative terminal of the car battery.
2. Access the Headlight Assembly: Locate the back of the headlight assembly. Depending on your vehicle, you may need to open the hood and remove a plastic cover, air intake, or other components to gain access.
3. Disconnect Wiring: Carefully disconnect the electrical connector from the back of the old bulb. This usually involves pressing a tab and pulling.
4. Remove Old Bulb: Release the retaining clip or twist the bulb counter-clockwise to remove it from the headlight housing. Pull the old bulb straight out.
5. Install New Bulb: Holding the new OSRAM NIGHT BREAKER LASER H11 bulb by its plastic base (do not touch the glass), insert it into the headlight housing. Ensure it is seated correctly and securely.
6. Secure Bulb: Re-engage the retaining clip or twist the bulb clockwise until it locks into place.
7. Reconnect Wiring: Reconnect the electrical connector to the new bulb.
8. Test Functionality: Before reassembling any removed components, turn on your vehicle's headlights to ensure the new bulbs are working correctly. Check both low and high beams.
9. Reassemble: Reinstall any components that were removed to access the headlight assembly.

Note: Some vehicles may require headlight aiming adjustments after bulb replacement. Consult your vehicle's service manual or a professional if necessary.

5. Operating Instructions

The OSRAM NIGHT BREAKER LASER H11 headlamps operate as standard halogen bulbs within your vehicle's existing electrical system. Once installed, simply use your vehicle's headlight switch to activate them. These bulbs are designed to provide enhanced illumination for improved visibility during night driving and adverse weather conditions.

• Low Beams: Use for general driving, especially when other vehicles are present, to avoid dazzling oncoming traffic.
• High Beams: Use only when driving on unlit roads without oncoming traffic or vehicles ahead. Switch back to low beams when approaching other vehicles.

These bulbs are ECE certified, meaning they comply with European regulations for automotive lighting and are road legal for use in vehicles where H11 type bulbs are specified.

6. Maintenance

OSRAM NIGHT BREAKER LASER H11 bulbs are designed for reliable performance. Regular maintenance is minimal but can help ensure optimal light output and longevity:

• Regular Inspection: Periodically check your headlights to ensure both bulbs are functioning correctly and providing adequate illumination.
• Clean Headlight Lenses: Keep your vehicle's headlight lenses clean from dirt, grime, and oxidation. A clean lens allows maximum light output.
• Avoid Contamination: If you need to handle the bulbs again, always use clean gloves to prevent oil transfer to the glass.
• Lifespan: High-performance halogen bulbs, like the NIGHT BREAKER LASER series, often have a shorter lifespan compared to standard halogen bulbs due to their increased light output. Be prepared for potential replacement after approximately 1-2 years of typical use, depending on driving habits.

7. Troubleshooting

If you encounter issues with your OSRAM NIGHT BREAKER LASER H11 headlamps, consider the following troubleshooting steps:

• Bulb Not Lighting Up:
  • Check the electrical connection to ensure it is securely attached to the bulb.
  • Inspect the vehicle's fuse box for a blown headlight fuse. Replace if necessary.
  • Verify that the bulb is correctly seated in the headlight housing.
  • If only one bulb is out, the bulb itself may have failed and requires replacement.
• Dim or Flickering Light:
  • Ensure the vehicle's battery and charging system are functioning correctly.
  • Check for loose or corroded electrical connections at the bulb or within the headlight wiring.
  • Clean the headlight lens if it is dirty or hazy.
• Uneven Light Pattern:
  • Confirm the bulb is properly seated and oriented in the headlight housing.
  • Check if the headlight assembly itself is damaged or misaligned.
  • Headlight aiming may be required. Consult a professional.

If these steps do not resolve the issue, it is recommended to consult a qualified automotive technician.

8. Specifications

9. Warranty Information

OSRAM products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your OSRAM NIGHT BREAKER LASER H11 headlamps, please refer to the official OSRAM website or contact OSRAM customer support. Warranty coverage typically addresses manufacturing defects.

10. Support

For further assistance, product information, or technical support, please use the following resources:

• OSRAM Official Website: Visit the official OSRAM automotive lighting website for comprehensive product details, FAQs, and support contacts.
• OSRAM Store on Amazon: Visit the OSRAM Store
• Product Information QR Code: Scan the QR code found on the product packaging for direct access to additional product information: http://qr.osram.info/amviehoff1