CleverSpa Waikiki Inflatable Hot Tub User Manual

1. Introduction

Welcome to the CleverSpa Waikiki Inflatable Hot Tub experience. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new hot tub. Please read this manual thoroughly before installation and use, and retain it for future reference.

Important Safety Information:

• Always ensure the hot tub is placed on a flat, stable, and level surface capable of supporting its full weight when filled.
• Do not use extension cords. Connect directly to a grounded power outlet.
• Keep children under supervision at all times when near the hot tub.
• Maintain proper water chemistry to ensure hygiene and longevity of the unit.
• Do not operate the hot tub if any part is damaged or malfunctioning.

2. Package Contents

Before beginning setup, please ensure all components listed below are present:

• CleverSpa Waikiki Inflatable Hot Tub Unit (with integrated pump and heating system)
• Clip-on Top Cover with Safety Keys
• Protective PVC Ground Sheet
• Water Filter Cartridge with Protective Mesh Cover
• Flexible Inflation Hose
• Convenient Carry Bag

3. Setup Instructions

Setting up your CleverSpa Waikiki is designed to be straightforward. Follow these steps for a quick and easy installation:

1. Choose a Location: Select a flat, level, and stable surface in your garden or patio. Ensure there is access to a grounded power outlet and sufficient drainage. The area should be clear of sharp objects.
2. Lay Out Ground Sheet: Unfold the protective PVC ground sheet in your chosen location. This helps protect the base of your hot tub.
3. Position the Hot Tub: Place the folded CleverSpa Waikiki unit onto the center of the ground sheet.
4. Inflate the Hot Tub: Connect the flexible inflation hose to the hot tub's inflation valve and the integrated pump. Plug the hot tub into the power outlet. Turn on the inflation function. The hot tub will inflate in approximately 5 minutes. Ensure it is firm but not over-inflated.


Figure 3.1: The CleverSpa Waikiki hot tub fully inflated and ready for filling.

5. Fill with Water: Once inflated, begin filling the hot tub with water using a garden hose. Fill to the recommended water level indicated on the inside of the hot tub. For faster heating, you may use warm water initially.
6. Install Filter Cartridge: Insert the water filter cartridge into its housing, ensuring the protective mesh cover is securely in place.
7. Secure the Cover: Once filled, place the clip-on top cover over the hot tub and secure all safety clips. This helps retain heat and keeps debris out.

4. Operating Your CleverSpa Waikiki

Your CleverSpa Waikiki features an easy-to-reach integrated digital control panel for convenient operation.

Figure 4.1: The soft-touch digital control panel for easy temperature and bubble control.

1. Power On: Ensure the hot tub is plugged in and the power is switched on at the outlet. The digital display will illuminate.
2. Set Temperature: Use the "Temp Up" and "Temp Down" buttons on the control panel to set your desired water temperature, up to 40°C. The heater will automatically activate to reach and maintain this temperature.
3. Activate Bubbles: Press the "Inflate/Bubble" button to activate the 130 powerful massaging bubble jets. Press again to turn them off. Note that the heater may pause when bubbles are active to prevent overheating.
4. Filter System: The integrated pump and heating system continuously filters the water at a rate of 1,880 liters per hour. Press the "Filter" button to manually activate or deactivate the filtration cycle. Regular filtration is crucial for water clarity.
5. Enjoy Your Spa: Once the desired temperature is reached, you can relax and enjoy the therapeutic benefits of your CleverSpa. The cushioned floor provides comfortable seating for up to 6 adults.


Figure 4.2: The CleverSpa Waikiki provides a relaxing experience for multiple users.

5. Maintenance

Regular maintenance is key to ensuring the longevity and hygiene of your CleverSpa Waikiki hot tub.

• Water Chemistry: Regularly test and adjust your water chemistry (pH, alkalinity, sanitizer levels) using appropriate hot tub chemicals. Follow the chemical manufacturer's instructions.
• Filter Cartridge Cleaning/Replacement: The filter cartridge should be cleaned regularly (e.g., daily or every other day depending on usage) by rinsing with a hose. Replace the filter cartridge every 1-2 weeks, or sooner if it appears dirty or clogged. A clean filter is essential for efficient filtration and heating.
• Draining and Cleaning: It is recommended to drain, clean, and refill your hot tub every 1-3 months, depending on usage and water quality. Refer to the manufacturer's guidelines for specific draining procedures.
• Cover Care: Always use the clip-on top cover when the hot tub is not in use. This helps maintain water temperature, reduces evaporation, and keeps debris out. Clean the cover periodically with a mild soap and water solution. Ensure all safety clips are fastened.


Figure 5.1: The hot tub with its protective cover, essential for heat retention and cleanliness.

• Winterization/Storage: If storing the hot tub for an extended period or during cold weather, ensure it is completely drained, cleaned, and thoroughly dried to prevent mold and mildew. Deflate and pack it away in the convenient carry bag.

6. Troubleshooting

This section addresses common issues you might encounter with your CleverSpa Waikiki hot tub. For more complex problems, please contact customer support.

• Hot Tub Not Heating:
  • Ensure the power plug is securely connected and the outlet is functioning.
  • Check if the desired temperature is set above the current water temperature.
  • Verify the filter cartridge is clean and not clogged. A dirty filter can restrict water flow and affect heating efficiency.
  • Ensure the hot tub cover is securely in place to prevent heat loss.
• Bubbles Not Working:
  • Confirm the "Inflate/Bubble" button has been pressed.
  • Check for any blockages in the air jet system (unlikely for new units).
  • Ensure the hot tub is adequately inflated.
• Water Appears Dirty/Cloudy:
  • Clean or replace the filter cartridge.
  • Test and adjust water chemistry (sanitizer, pH, alkalinity).
  • Ensure the filtration system is running for sufficient periods.
• Water Leakage:
  • Inspect the hot tub for any visible punctures or tears. Use the included repair patch kit if necessary.
  • Check connections for the filter housing and drain valve to ensure they are tight.

7. Technical Specifications

8. Warranty and Support

For specific warranty details and terms, please refer to the documentation provided with your purchase or visit the official CleverSpa website. CleverSpa products typically come with a manufacturer's warranty covering defects in materials and workmanship.

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact CleverSpa customer support. Have your model name (Waikiki) and ASIN (B07FW7FF15) ready when contacting support.

Manufacturer: CleverSpa

For the most up-to-date support information, please visit: CleverSpa Official Support (Example link, actual link may vary)