ECONTROLLY RC200NS00 Replacement Remote Control User Manual

1. Introduction

This manual provides instructions for the ECONTROLLY RC200NS00 replacement remote control. This remote is designed to function as a direct replacement for various SANYO LCD-LED HDTV models, requiring no programming or setup beyond battery installation.

Image 1.1: Front view of the ECONTROLLY RC200NS00 remote control, showing all buttons including Power, Input, number pad, navigation, volume, and channel controls.

2. Setup: Battery Installation

The RC200NS00 remote control operates on two AAA batteries. Follow these steps to install the batteries:

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery compartment cover downwards or press the latch and lift to open.
3. Insert two new AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Once batteries are installed, the remote is ready for use with compatible SANYO LCD-LED HDTV models without any additional programming.

Image 2.1: Back view of the ECONTROLLY RC200NS00 remote control, showing the open battery compartment designed for two AAA batteries.

3. Operating Instructions

This remote control is designed for intuitive operation. Simply point the remote at your SANYO LCD-LED HDTV and press the desired button. No programming or pairing is required.

Key Functions:

• POWER: Turns the television on or off.
• INPUT: Selects the video input source (e.g., HDMI 1, AV, Component).
• Number Buttons (0-9): Directly enters channel numbers.
• SUB. CH: Accesses sub-channels.
• FAVORITE: Accesses favorite channels.
• MENU: Displays the television's main menu.
• SLEEP+: Sets the sleep timer.
• EXIT: Exits the current menu or on-screen display.
• Navigation Buttons (Up, Down, Left, Right, ENTER): Navigates through menus and confirms selections.
• PICTURE: Adjusts picture settings.
• SLEEP-: Adjusts or cancels the sleep timer.
• RETURN: Returns to the previous channel or menu.
• VOL (+/-): Adjusts the volume level.
• MUTE: Mutes or unmutes the television audio.
• CH (^/v): Changes channels up or down.
• INFO: Displays information about the current program.
• AUDIO: Selects audio options.
• TV: Switches to TV mode.
• USB: Selects USB input.
• RESET: Resets certain settings (functionality may vary by TV model).
• Playback Controls (Rewind, Play, Fast Forward, Stop): Controls media playback if supported by the TV.

4. Compatible SANYO LCD-LED HDTV Models

The ECONTROLLY RC200NS00 remote control is compatible with a wide range of SANYO LCD-LED HDTV models, including but not limited to the following:

DP24E14M, DP32D53, DP32D53M, DP39D14M, DP40D64, DP50E44M, GXBB, GXDB, CS-90283U, CS90283U, NH315UD, FVD4064, DP32642, DP39E23, DP39843, DP46812, FVE3923, FVE3963, DP19648, DP26640, DP26649, DP39E63, DP42D23, DP37840, DP42840, DP42840C, DP46840, DP50740, DP52440, DP19640, DP15647, DP15657, DP19647, DP42861, DP42862, DP46861, DP46862, DP26647, DP32647, DP37647, DP42647, DP42849, DP46849, DP50747, DP55360, DP39E23T, DP32640, DP39842, DP42740, DP42740M, DP42841, DP46841, DP47840, DP50710, DP50741, DP50842, FVM2661, FVM3261, FVM3982, FVM4212, FVM4281, FVM4681, FVM5082, DP32649, DP24E14, DP39D14, DP42D24, DP50E44, DP55D44, DP58D34, DP65E34, FVD3924, FVD5044, FVF5044M, FW24E05T, FW32D25T, FW42D25T, FW65D25T, FVD40P4, FVD40R4, FVD48P4, FVD48P4/R4, FVD48P4R4, FVD48R4, DP50E84, DP55D33, DP58D33, DP50843, FVD5833, FFW32D06F, FW40D06F, FW43D25F, FW50D36F, FW40D36F, DP42410, DP55441, CS90283T, DP32242, DP40142, DP42142, DP46142, FVM4012, FVM4612, DP26746, DP42746A, DP42746GX, DP42746M, DP42851, FW43C46F, FW50C36F, FW50C85T, FW55C46F, DP26648, DP32648, DP37649, DP42848, DP46848, DP52848, DP37819, DP46819, DP50719, FW40D36F, FW32D06F, FW40D36FB, FW32D06FB, HT27546, HT27547, HT32546, SVD2317, DP42746, DS27425A, DP23625, DP23625A, DP23845, DP50749, DP52449, DP37849, DP42449, DP46449, 6102298550, 6450068515, 6450068522, 6450068546, 6450068553, 6450126390, 6450126406, 6450126413, 6450126420, 6450126468, 6450183621, 8VM1306, 8VM1906, AV1308G, AV1977A1, AV2504, AVM1303, AVM1304, AVM1305, AVM1306, AVM1307, AVM1308, AVM13086, AVM1308G, AVM1308S, AVM1309, AVM1309G, AVM1309S, AVM1341, AVM1341S, AVM1903, AVM1904, AVM1905.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote control. Avoid using liquid cleaners or abrasive materials.
• Battery Care: Replace batteries when the remote's performance diminishes. Remove batteries if the remote will not be used for an extended period to prevent leakage.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

• Remote not responding:
  • Ensure new alkaline AAA batteries are correctly installed with proper polarity.
  • Check for any obstructions between the remote and the TV's infrared sensor.
  • Verify that the remote is pointed directly at the TV.
• Some buttons not working as expected:
  • While this remote is a direct replacement, specific advanced functions (e.g., 'Pix Shape' or 'Reset' buttons) may behave differently or not be fully supported on all SANYO TV models due to variations in original TV firmware or features.
  • Ensure your TV model is listed in the compatibility section.

7. Specifications

8. Warranty and Support

This ECONTROLLY RC200NS00 remote control is a replacement unit. For any issues, questions, or warranty inquiries, please contact the seller or manufacturer directly through your purchase platform. Please refer to your purchase documentation for specific warranty terms and contact information.