Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Realspace Vista Glass 76"W L-Shape Corner Desk. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image 1: Realspace Vista Glass L-Shape Corner Desk overview.
Safety Information
- This product is heavy and/or oversized. Two people are required for safe handling and assembly to prevent injury and damage to the product.
- Assembly is required. Follow all steps precisely to ensure structural integrity and stability.
- Exercise extreme caution when handling the tempered glass components. Glass can break if dropped, struck, or improperly installed.
- Ensure all fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not overload the desk. Distribute weight evenly across the surface.
- Avoid placing hot items directly on the glass surface without protective padding.
Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Tempered Glass Desktop Panels (L-shaped sections)
- Metal Frame Components (legs, support beams)
- Pull-out Keyboard Tray Assembly
- All necessary Assembly Hardware (screws, bolts, washers, Allen wrench)
Setup and Assembly Instructions
Assembly of this desk requires two people. All necessary tools are included. Follow these steps carefully:
- Unpack and Organize: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify all parts against the included parts list.
- Assemble Frame Sections: Begin by assembling the individual metal frame sections according to the diagrams provided in your separate assembly guide. Ensure all connections are firm but do not fully tighten bolts until the glass is in place.
- Attach Glass Desktop Panels: With assistance, carefully place the tempered glass desktop panels onto the assembled frame sections. Align the pre-drilled holes in the glass with the frame's attachment points. Secure the glass using the provided hardware. Do not slide the glass into place as this may scratch the frame finish.
- Install Keyboard Tray: Attach the pull-out keyboard tray assembly to the designated underside of the desk, following the specific instructions for its mounting hardware.
- Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws. Do not overtighten.
- Positioning: Carefully move the assembled desk to its desired location. The L-shaped design allows for flexible placement in a corner or as a larger workspace.
Image 2: The Realspace Vista Glass L-Shape Corner Desk integrated into an office environment.
Operating and Usage
Your Realspace Vista Glass L-Shape Corner Desk is designed for optimal productivity and a modern aesthetic.
- Workspace Utilization: The L-shaped design provides ample surface area for multiple monitors, documents, and office equipment, allowing for an organized and efficient workspace.
- Keyboard Tray: Utilize the slide-out keyboard tray for ergonomic typing and to free up desktop space.
- Tempered Glass Surface: The tempered glass desktop offers a sleek, modern look and is durable for everyday use.
- Placement: Position your computer monitors and other heavy items strategically to distribute weight evenly and maintain desk stability.
Maintenance
Proper care will ensure the longevity and appearance of your desk.
- Glass Cleaning: Clean the tempered glass surface with a soft, lint-free cloth and a glass cleaner. Avoid abrasive cleaners or scouring pads that could scratch the glass.
- Frame Cleaning: Wipe the powder-coated metal frame with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain desk stability.
- Avoid Scratches: Use coasters or protective pads under items that could scratch the glass or metal surfaces.
Troubleshooting
If you encounter issues with your desk, refer to the following common solutions:
- Desk Wobbles: Ensure all assembly bolts are fully tightened. Check that the desk is on a level surface. Adjust any leveling feet if present.
- Scratches on Glass: Minor scratches may be polished with specialized glass scratch removal kits. For deeper scratches or cracks, the glass panel may need replacement.
- Keyboard Tray Sticks: Check the slider mechanisms for any obstructions or debris. Ensure the mounting screws are not overtightened, which could impede movement.
- Missing Hardware: If you find hardware missing during assembly, please contact Realspace customer support for replacement parts.
Specifications
| Feature | Detail |
|---|---|
| Brand | Realspace |
| Model | Vista Glass L-Shape Corner Desk |
| Color | Silver |
| Style | Contemporary |
| Base Material | Alloy Steel |
| Finish Type | Powder Coated |
| Top Material Type | Glass |
| Item Weight | 161.6 Pounds |
| Dimensions (Approx.) | 63.4" L x 35.04" W x 8.35" H (Note: These dimensions appear to be for packaging, actual assembled dimensions will be larger for an L-shape desk) |
| Required Assembly | Yes |
| Recommended People for Assembly | 2 |
| Included Components | Keyboard Tray |
| UPC | 735854962913 |
Warranty and Support
This Realspace product comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your purchase or visit the official Realspace website.
For customer support, missing parts, or further assistance, please contact Realspace customer service. Contact information can typically be found on the product packaging or the brand's official website.
