1. Introduction
This user manual provides detailed instructions for the operation and maintenance of the SNDWAY SW-S50 Handheld Laser Distance Meter. Please read this manual carefully before using the device to ensure proper and safe operation.
The SNDWAY SW-S50 is a versatile tool designed for precise measurement of distance, area, volume, and angles. It features advanced functions such as Pythagorean measurement, continuous measurement, staking-out, and delay measurement, making it suitable for various professional and DIY applications.
2. Product Overview
2.1 Key Features
- Multifunctional: Individual and continuous distance measurement, area, volume, and angle measurement, Pythagorean theorem, addition and subtraction, large LCD screen with backlight.
- Connect to Computer: Transfer device recordings to a computer and configure 7 options.
- Multi-directional Electronic Level Bubble: Simulates actual horizontal bubble function, measures tilt angle relative to horizontal and vertical positions.
- Staking-out: Find positions corresponding to a set distance.
- Delay Measurement: Convenient for delayed measurements. Long press the button to start.
2.2 Package Contents
The package includes the following items:
- 1 x Laser Distance Meter
- 1 x Portable Bag
- 1 x USB Connector
- 1 x Disk (Software/Drivers)
- 1 x Hand Strap
- 1 x User Manual

Figure 2.1: Contents of the SNDWAY SW-S50 package.
3. Setup
3.1 Battery Installation
The device requires 3 x AAA 1.2V batteries (not included). To install the batteries:
- Open the battery compartment cover on the back of the device.
- Insert three AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
3.2 Initial Power On
Press the READ button to power on the device. The LCD screen will illuminate.
3.3 Unit Selection
Press the UNIT button to cycle through measurement units: meters (m), inches (in), and feet (ft).
4. Operating Instructions
4.1 Basic Measurement
To perform a single distance measurement:
- Point the laser at the target.
- Press the READ button. The measured distance will be displayed on the screen.

Figure 4.1: Single Distance Measurement.
4.2 Continuous Measurement (Tracking)
For continuous measurement, also known as tracking mode, the device will constantly update the distance as you move it.
- Long press the READ button.
- Move the device. The maximum and minimum values will be displayed on the screen along with the current distance.

Figure 4.2: Continuous Measurement Mode.
4.3 Area Measurement
To measure the area of a rectangular space:
- Enter Area Measurement mode (refer to device interface for specific button).
- Measure the length.
- Measure the width. The device will automatically calculate and display the area.

Figure 4.3: Area Measurement.
4.4 Volume Measurement
To measure the volume of a space:
- Enter Volume Measurement mode.
- Measure the length.
- Measure the width.
- Measure the height. The device will automatically calculate and display the volume.

Figure 4.4: Volume Measurement.
4.5 Pythagorean Measurement
The device supports various Pythagorean measurement modes to calculate indirect distances (e.g., height of a building).
- Select the desired Pythagorean mode.
- Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
- The device will calculate and display the unknown side.

Figure 4.5: Pythagorean Measurement Examples.
4.6 Multi-directional Electronic Level Bubble
The integrated electronic level bubble allows for precise angle measurement and ensures the device is level during measurements.

Figure 4.6: Electronic Level Bubble in Use.
4.7 Auxiliary Camera Measurement
For outdoor use or in bright conditions where the laser spot may be difficult to see, the auxiliary camera can assist in targeting.

Figure 4.7: Auxiliary Camera for Targeting.
4.8 Data Storage and PC Connection
The device can store up to 100 sets of measurement data. This data can be transferred to a computer using the provided USB connector and software for further analysis or printing.

Figure 4.8: Connecting to a Computer for Data Transfer.
5. Maintenance
5.1 Cleaning
Regularly clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the laser lens is free from dust and debris for accurate measurements.
5.2 Storage
When not in use, store the device in its portable bag in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
5.3 Calibration
The device features a self-calibration function. Refer to the device's on-screen menu or the full user manual for instructions on how to perform self-calibration if you suspect measurement inaccuracies.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low or dead batteries; incorrect battery installation. | Replace batteries; ensure correct polarity. |
| Inaccurate measurements. | Laser lens is dirty; device not stable; target surface is reflective or transparent; device needs calibration. | Clean laser lens; ensure stable measurement; use a non-reflective target; perform self-calibration. |
| Laser spot not visible outdoors. | Bright ambient light. | Use the auxiliary camera function for targeting. |
| Cannot connect to computer. | Incorrect USB cable; driver not installed; software issue. | Use the provided USB cable; install drivers from the included disk; restart software/computer. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | SNDWAY |
| Model Number | SW-S50 |
| Working Range | 50 m |
| Accuracy | ± 2 mm |
| Unit Options | m / in / ft |
| Continuous Measurement | Yes |
| Area Measurement | Yes |
| Volume Measurement | Yes |
| Pythagorean Measurement | Yes |
| Addition/Subtraction | Yes |
| Staking-out | Yes |
| Delay Measurement | Yes |
| Self-calibration | Yes |
| Min/Max Value Display | Yes |
| USB Connector | Yes |
| Max Storage | 100 units |
| Angle Sensor | ± 90 degrees |
| Multi-directional Electronic Level Bubble | Yes |
| Backlight | Yes |
| Button/Key Sound | Yes |
| Laser Level | Class II |
| Laser Type | 635 nm, <1 mW |
| Auto-laser Off | 20 ~ 120 seconds |
| Auto Power Off | 100 ~ 300 seconds |
| Storage Temperature | -20 to 60 °C |
| Operating Temperature | 0-40 °C |
| Storage Humidity | 85% RH |
| Battery Type | 3 x AAA 1.2V (not included) |
| Dimensions | 125 x 53 x 26 mm |
| Weight | 117 g |
8. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: Hermosairis
First Available Date: August 13, 2020